The Wacker Neuson is a genuine OEM Governor Arm designed for a wide range of Wacker Neuson equipment, including CT36 and CT48 walk-behind concrete trowels, BFS floor saws, PT3A centrifugal trash pumps, GP3800A and GV5000A portable generators, and BPU reversible vibratory plates. As a factory-sourced component, the is manufactured to the exact tolerances and geometry required by the original engine governor assembly — ensuring correct throttle response and engine speed regulation across all covered models. This part covers an extensive cross-section of Wacker Neuson equipment lines, making it a high-demand service item for dealers, rental fleets, and contractors managing mixed equipment inventories. Confirm your model and machine number against the fitment list before ordering to ensure this is the correct governor arm for your application.
Key Features
- OEM-Matched Pivot Geometry — Manufactured to the exact arm length and pivot dimensions specified by Wacker Neuson, ensuring the governor linkage moves through its full range of travel without binding or slack.
- Direct Throttle-Linkage Replacement — Drops into the existing governor assembly without modification to the linkage rod, spring anchor points, or carburetor connection, preserving the original engine speed calibration.
- Broad Multi-Family Fitment — A single part number covers CT36 and CT48 walk-behind trowels, BFS floor saws, PT3A trash pumps, GP3800A and GV-series portable generators, and BPU reversible vibratory plates — simplifying stocking for multi-equipment operations.
- Stable Engine RPM Under Load — A correctly functioning governor arm allows the engine to maintain target RPM as load increases; a worn or bent arm causes erratic speed hunting, under-revving under load, or runaway over-speed conditions.
- Fuel System Safety Relevance — Because the governor arm directly controls fuel delivery via the carburetor throttle, using the correct OEM part prevents over-fueling and the associated risks of engine over-speed on power tools, pumps, and trowels.
The governor arm is a mechanical linkage component that connects the centrifugal governor flyweights to the carburetor throttle plate. As engine load changes, the governor assembly uses this arm to open or close the throttle, maintaining a consistent target RPM regardless of the work being demanded of the engine. When the governor arm is bent, cracked, or worn at its pivot point, the engine loses the ability to regulate its own speed — resulting in surging, stalling under load, or dangerous over-revving. Replacing a damaged governor arm restores precise speed control and protects the engine from the wear caused by uncontrolled RPM fluctuation.
Part Details
| Part Number | 5000074641 |
|---|---|
| Old Part Number | 0074641 |
| Brand | Wacker Neuson |
| Part Type | Genuine OEM |
| Description | Governor Arm |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| BFS940 | BFS940 | 5100029229, 5100054574 |
| CT36-8A-V | CT36-8A-V | 5000620832, 5000009442 |
| CT36-8A Trowel | CT36-8A | 5000009439, 5000620831 |
| CT48-8A Trowel | CT48-8A | 5000009449 |
| CT48-8A | CT48-8A EU | 5000620837 |
| 75mm/3in Centrifugal Trash Pum p | PT3A | 5000009098, 5000009101, 5000009240, 5000620800, 5000006729, 5000006730, 5100058535, 5100058536, 5100042216 |
| Portable Generator | GP3800A | 5000620104, 5000620379, 5000620485, 5000620342, 5000620484, 5000620041, 5000620103, 5000620010, 5100041978 |
| GV5000A | GV5000A | 5000009346, 5000009351, 5000009361, 5100006204 |
| 50Hz Portable Value Generator | GV5003A | 5000009347, 5000009362, 5100002154 |
| 915mm/36in CE Walk-behind Trow el | CT36AGP | 5000007596, 5000007595 |
| 915mm/36in CE Walk-behind Trow el | CT36AGP-E | 5000008036, 5000008026 |
| 1220mm/48in Walk-behind Trowel | CT48ADP | 5000007598, 5000007599, 5000008199 |
| 1220mm/48in CE Walk-behind Tro wel | CT48ADP-E | 5000008027, 5000008028 |
| 915mm/36in CE Walk-behind Trow el | CT36AGT-E | 5000007594, 5000008012 |
| 1220mm/48in CE Walk-behind Tro wel | CT48ADT-E | 5000007597, 5000008016 |
| 915mm/36in CE Walk-behind Trow el | CT36AGT | 5000008014, 5000008011 |
| 1220mm/48in Walk-behind Trowel | CT48ADT | 5000008015, 5000008040 |
| 50Hz Portable Generator | G3.3A | 5000008257, 5000008253, 5000008255, 5000008251 |
| 50Hz Portable Generator | G3.3AE | 5000008258, 5000008252, 5000008254, 5000008256, 5000008259 |
| GP3800A Generator, EPA w/Wheel Kit | GP3800 | 5000620976, 5000620974, 5000620975, 5100031174 |
| Portable Generator | G3.7A | 5000007189, 5000008044 |
| BPU 3050A | BPU 3050A | 5000008763 |
| Reversible Vibratory Plate, 35 kN, 45cm/18in | BPU 3545A | 5000008783 |
| 915mm/36in Variable Speed Walk #NAME? | CT36AVP | 5000009235, 5000009236 |
| HPG100A | HPG100A | 5000009507 |
| BPU 3050A US | BPU 3050A US | 5000610361 |
| BFS 935A SAW,BASIC | BFS 935AB | 5000008910 |
| 915mm/36in Variable Speed Walk #NAME? | CT36AVT | 5000009233, 5000009234 |
| Single Direction Vibratory Pla te, 25kN, 50cm/20in | BPS 2550A | 5000007528 |
| HPG50A | HPG50A | 5000009509 |
| BPU 3750Ats | BPU 3750Ats | 5000610408 |
| BPU3750Ats | BPU 3750Ats US | 5000610423 |
| Gasoline Floor Saw, Ø 350 | BFS 80 | 5000006654 |
| Gasoline Reversible Vibratory Plate | BPU 3050 | 5000008955 |
| BFS 914AB SAW | BFS 914AB | 5000610092 |
| BPU 4045A US | BPU 4045A US | 5100009663, 5000610403 |
| Petrol Floor Saw BFS 940A | BFS 940A | 5000610327, 5100004004 |
| Reversible Plates | MPU 29A | 5000630244 |
| Vibration Plate BPU 2950A WSM | BPU 2950A | 5000007873, 5000007962 |
| Portable Generator, 50Hz | G3.3AI | 5000009036 |
| Vibratory plate BPU 4045A | BPU 4045A | 5000610345 |
| Value Generator | GV3800A | 5000620409, 5000620287, 5000620334 |
| Value Portable Generator | GV3800 | 5000620994 |
| Vibratory Truss Screed, Power Section | HPG100 | 5000008293 |
| Vibratory Truss Screed, Power Section | HPG50 | 5000008294 |
| Gasoline Floor Saw, 350 cutmat ic | BFS 935A | 5000008694 |
| Gasoline Floor Saw, 350 cutmat ic | BFS 935AL | 5000008695 |
| Portable Generator | G3.3AIT | 5000009460 |
| BPU3545A-VIBROPLATE | BPU 3545A US | 5000610362 |
| Floor Saw | BFS 914A | 5100004002 |
| Floor saw BFS940 | BFS 940 | 5100009934 |
| Vibration Plate | BPU3050A CN | 5100039661 |
| PT3A(I) | PT3A(I) | 5100042614 |
| BT48A | BT48A | 5100081471 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.