The Wacker Neuson 5000074729 is a genuine OEM Control Lever designed for a broad range of Wacker Neuson equipment, including CT36 and CT48 walk-behind concrete power trowels, BFS floor saws, PT3A centrifugal trash pumps, BPU and BPS reversible and single-direction vibratory plate compactors, and HPG vibratory truss screed power units. Sourced directly from Wacker Neuson, part 5000074729 is manufactured to the same specification as the original component fitted at the factory. Fitment spans multiple series and configurations across the CT36, CT48, BFS914, BFS935, BFS940, PT3A, BPU 2950A, BPU 3050A, BPU 3545A, BPU 3750Ats, BPU 4045A, BPS 2550A, HPG50, HPG100, MPU 29A, and BT48A lines. Verify your model and machine number before ordering to confirm this is the correct lever for your specific unit.
Key Features
- Genuine OEM Construction — Manufactured by Wacker Neuson to exact original tolerances, ensuring the lever pivot, engagement feel, and range of motion match the as-built machine specification.
- Direct-Swap Installation — Replaces the original Control Lever using existing mounting points and hardware, with no rework or re-drilling needed to fit the lever assembly.
- Wide Cross-Family Fitment — Compatible with CT36 and CT48 walk-behind trowel families, BFS floor saw series, PT3A trash pumps, BPU/BPS vibratory plate compactors, HPG screed power units, and more.
- Restored Operator Control — A worn or damaged control lever introduces imprecise throttle or engagement response; replacing it restores crisp, predictable operator input across the full range of machine functions.
- Operator Safety Relevance — As a primary control input component, a fully functional Control Lever is essential to safe machine operation — a faulty or loose lever can cause unintended engagement or loss of throttle control.
The control lever is the primary mechanical interface between the operator and the machine's throttle, clutch, or engagement system, depending on the host machine family. It translates hand input into consistent, calibrated commands that govern engine speed, blade engagement, or pump output. When a control lever wears, bends, or loses its positive detent action, the operator loses precise control over machine behavior — resulting in inconsistent output on finishing or cutting passes, erratic pump flow, or unreliable plate compactor engagement. Replacing a degraded lever with a correct OEM part restores the intended control response and keeps the machine operating as designed.
Part Details
| Part Number | 5000074729 |
|---|---|
| Old Part Number | 0074729 |
| Brand | Wacker Neuson |
| Part Type | Genuine OEM |
| Description | Control Lever |
Compatibility & Fitment
| Name | Models | Machine Number |
|---|---|---|
| 75mm/3in Centrifugal Trash Pum p | PT3A | 5000009098, 5000009101, 5000009240, 5000620800, 5000006730, 5000006729, 5100058536, 5100058535, 5100042216 |
| 915mm/36in CE Walk-behind Trow el | CT36AGT-E | 5000007594, 5000008012 |
| 915mm/36in CE Walk-behind Trow el | CT36AGP | 5000007596, 5000007595 |
| 915mm/36in CE Walk-behind Trow el | CT36AGT | 5000008014, 5000008011 |
| 915mm/36in CE Walk-behind Trow el | CT36AGP-E | 5000008036, 5000008026 |
| 915mm/36in Variable Speed Walk #NAME? | CT36AVT | 5000009233, 5000009234 |
| 915mm/36in Variable Speed Walk #NAME? | CT36AVP | 5000009235, 5000009236 |
| 1220mm/48in CE Walk-behind Tro wel | CT48ADP | 5000007599, 5000007598, 5000008199 |
| 1220mm/48in CE Walk-behind Tro wel | CT48ADP-E | 5000008027, 5000008028 |
| 1220mm/48in Walk-behind Trowel | CT48ADT | 5000008015, 5000008040 |
| 1220mm/48in Walk-behind Trowel | CT48ADT-E | 5000008016, 5000007597 |
| BFS 914AB SAW | BFS 914AB | 5000610092 |
| BFS 935A SAW,BASIC | BFS 935AB | 5000008910 |
| BFS940 | BFS940 | 5100029229, 5100054574 |
| BPU 3050A | BPU 3050A | 5000008763 |
| BPU 3050A US | BPU 3050A US | 5000610361 |
| BPU 3750Ats | BPU 3750Ats | 5000610408 |
| BPU 4045A US | BPU 4045A US | 5100009663, 5000610403 |
| BPU3545A-VIBROPLATE | BPU 3545A US | 5000610362 |
| BPU3750Ats | BPU 3750Ats US | 5000610423 |
| BT48A | BT48A | 5100081471 |
| CT36-8A Trowel | CT36-8A | 5000009439, 5000620831 |
| CT36-8A-V | CT36-8A-V | 5000620832, 5000009442 |
| CT48-8A | CT48-8A EU | 5000620837 |
| CT48-8A Trowel | CT48-8A | 5000009449 |
| Floor Saw | BFS 914A | 5100004002 |
| Floor saw BFS940 | BFS 940 | 5100009934 |
| Gasoline Floor Saw, Ø 350 | BFS 80 | 5000006654 |
| Gasoline Reversible Vibratory Plate | BPU 3050 | 5000008955 |
| HPG50A | HPG50A | 5000009509 |
| HPG100A | HPG100A | 5000009507 |
| Petrol Floor Saw BFS 940A | BFS 940A | 5000610327, 5100004004 |
| PT3A(I) | PT3A(I) | 5100042614 |
| Reversible Plates | MPU 29A | 5000630244 |
| Reversible Vibratory Plate, 35 kN, 45cm/18in | BPU 3545A | 5000008783 |
| Single Direction Vibratory Pla te, 25kN, 50cm/20in | BPS 2550A | 5000007528 |
| Vibration Plate | BPU3050A CN | 5100039661 |
| Vibration Plate BPU 2950A WSM | BPU 2950A | 5000007873, 5000007962 |
| Vibratory plate BPU 4045A | BPU 4045A | 5000610345 |
| Vibratory Truss Screed, Power Section | HPG100 | 5000008293 |
| Vibratory Truss Screed, Power Section | HPG50 | 5000008294 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.