The Wacker Neuson 5000074733 is a genuine OEM Governor Rod designed for a wide range of Wacker Neuson equipment, including CT36 and CT48 series walk-behind concrete power trowels, BFS floor saws, GP3800A and GV-series portable generators, and PT3A centrifugal trash pumps. As a direct OEM replacement, this Governor Rod is manufactured to the same specifications as the original component, ensuring correct mechanical response and consistent engine speed regulation across every compatible machine. The 5000074733 covers an extensive fitment range spanning BPU reversible vibratory plates, BPS single-direction vibratory plates, HPG power units, and BFS floor saws, making it a practical stock item for dealers and rental fleets alike. Verify your model number against the fitment list before ordering to confirm compatibility.
Key Features
- OEM-Matched Mechanical Tolerances — Manufactured to original specifications, ensuring the rod length, pivot geometry, and material stiffness match the engine governor system exactly, so throttle response is neither sluggish nor erratic.
- Drop-In Installation — Connects directly to the existing governor arm and throttle linkage using the original mounting points, requiring no modification to the linkage assembly.
- Broad Fitment Coverage — Compatible with CT36 and CT48 walk-behind trowels, BFS floor saws, GP3800A and GV-series generators, PT3A trash pumps, BPU and BPS vibratory plates, and HPG power units.
- Consistent Engine Speed Under Load — A correctly functioning governor rod allows the engine to maintain target RPM as load changes, protecting equipment output quality and preventing over-speed or under-speed conditions.
- Fuel System Integrity — The governor rod is a direct link in the fuel delivery control circuit; a worn, bent, or broken rod can cause uncontrolled engine speed fluctuation and should be replaced promptly to maintain safe operation.
The governor rod is a mechanical link between the engine's centrifugal governor flyweights and the carburetor throttle plate. As engine load increases or decreases, the governor flyweights shift position and move the rod, which in turn opens or closes the throttle to keep engine speed steady. When the governor rod is bent, worn at its pivot points, or broken, the governor loses the ability to regulate speed accurately — the engine may hunt, surge, run excessively fast, or bog down under load. Replacing a damaged rod restores precise speed control, which is especially critical on concrete trowels and floor saws where consistent RPM directly affects the quality of the finished work.
Part Details
| Part Number | 0074733 |
|---|---|
| Brand | Wacker Neuson |
| Part Type | Genuine OEM |
| Description | Governor Rod |
Compatibility & Fitment
| Name | Models | Machine Number |
|---|---|---|
| 50Hz Portable Generator | G3.3A | 5000008257, 5000008253, 5000008255, 5000008251 |
| 50Hz Portable Generator | G3.3AE | 5000008258, 5000008259, 5000008254, 5000008252, 5000008256 |
| 50Hz Portable Value Generator | GV5003A | 5000009347, 5000009362, 5100002154, 5000009357, 5000009352 |
| 75mm/3in Centrifugal Trash Pum p | PT3A | 5000009098, 5000009240, 5000009101, 5000620800, 5000006729, 5000006730, 5100058535, 5100058536, 5100042216 |
| 915mm/36in CE Variable Speed W alk-behind Trowel | CT36AVT | 5000009234, 5000009233 |
| 915mm/36in CE Walk-behind Trow el | CT36AGT-E | 5000007594, 5000008012 |
| 915mm/36in CE Walk-behind Trow el | CT36AGP | 5000007596, 5000007595 |
| 915mm/36in CE Walk-behind Trow el | CT36AGT | 5000008014, 5000008011 |
| 915mm/36in CE Walk-behind Trow el | CT36AGP-E | 5000008036, 5000008026 |
| 915mm/36in Variable Speed Walk #NAME? | CT36AVP | 5000009235, 5000009236 |
| 1220mm/48in CE Walk-behind Tro wel | CT48ADP | 5000007599, 5000007598, 5000008199 |
| 1220mm/48in Walk-behind Trowel | CT48ADT | 5000008015, 5000008040 |
| 1220mm/48in Walk-behind Trowel | CT48ADT-E | 5000008016, 5000007597 |
| 1220mm/48in Walk-behind Trowel | CT48ADP-E | 5000008028, 5000008027 |
| BFS 914AB SAW | BFS 914AB | 5000610092 |
| BFS 935A SAW,BASIC | BFS 935AB | 5000008910 |
| BFS940 | BFS940 | 5100029229, 5100054574 |
| BPU 3050A | BPU 3050A | 5000008763 |
| BPU 3050A US | BPU 3050A US | 5000610361 |
| BPU 3750Ats | BPU 3750Ats | 5000610408 |
| BPU 4045A US | BPU 4045A US | 5100009663, 5000610403 |
| BPU3545A-VIBROPLATE | BPU 3545A US | 5000610362 |
| BPU3750Ats | BPU 3750Ats US | 5000610423 |
| BT48A | BT48A | 5100081471 |
| CT36-8A | CT36-8A | 5000620831, 5000009439 |
| CT36-8A-V | CT36-8A-V | 5000620832, 5000009442 |
| CT48-8A | CT48-8A EU | 5000620837 |
| CT48-8A Trowel | CT48-8A | 5000009449 |
| Floor Saw | BFS 914A | 5100004002 |
| Floor saw BFS940 | BFS 940 | 5100009934 |
| Gasoline Floor Saw, 350 cutmat ic | BFS 935A | 5000008694 |
| Gasoline Floor Saw, 350 cutmat ic | BFS 935AL | 5000008695 |
| Gasoline Floor Saw, Ø 350 | BFS 80 | 5000006654 |
| Gasoline Reversible Vibratory Plate | BPU 3050 | 5000008955 |
| GP3800A Generator, EPA w/Wheel Kit | GP3800 | 5000620976, 5000620974, 5000620975, 5100031174 |
| GV5000A | GV5000A | 5000009346, 5000009351, 5000009361, 5100006204, 5000009356 |
| HPG50A | HPG50A | 5000009509 |
| HPG100A | HPG100A | 5000009507 |
| Petrol Floor Saw BFS 940A | BFS 940A | 5000610327, 5100004004 |
| Portable Generator | G3.7A | 5000007189, 5000008044 |
| Portable Generator | G3.3AIT | 5000009460 |
| Portable Generator | GP3800A | 5000620104, 5000620379, 5000620485, 5000620342, 5000620484, 5000620041, 5000620103, 5000620010, 5100041978 |
| Portable Generator, 50Hz | G3.3AI | 5000009036 |
| PT3A(I) | PT3A(I) | 5100042614 |
| Reversible Plates | MPU 29A | 5000630244 |
| Reversible Vibratory Plate, 35 kN, 45cm/18in | BPU 3545A | 5000008783 |
| Single Direction Vibratory Pla te, 25kN, 50cm/20in | BPS 2550A | 5000007528 |
| Value Generator | GV3800A | 5000620409, 5000620334, 5000620287 |
| Value Portable Generator | GV3800 | 5000620994 |
| Vibration Plate | BPU3050A CN | 5100039661 |
| Vibration Plate BPU 2950A WSM | BPU 2950A | 5000007873, 5000007962 |
| Vibratory plate BPU 4045A | BPU 4045A | 5000610345 |
| Vibratory Truss Screed, Power Section | HPG100 | 5000008293 |
| Vibratory Truss Screed, Power Section | HPG50 | 5000008294 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.