The Wacker Neuson is a genuine OEM Shaft Seal 35 X 48 X 8 5B designed for VP and AP series single-direction vibratory plate compactors and BFS series floor saws. Sourced directly from Wacker Neuson, this seal matches the original dimensional and material specification — 35mm inner diameter, 48mm outer diameter, 8mm width — ensuring a proper installation with no guesswork. Fitment covers the VP1340R, VP1340RW, VP1550R, VP1550RW, VP2050R, VP2050RW, AP1550R, BFS 1345B, BFS 1345BZ, and BFS 1350L. When a shaft seal wears out or begins to leak, keeping the correct OEM part number on hand means faster service turnaround and confidence in the repair.
Key Features
- OEM-Matched Sealing Material — Manufactured to the original compound and hardness grade, delivering the compression and lip-contact performance required to hold lubrication under vibratory and rotational load.
- Exact Dimensional Fit — 35 x 48 x 8mm profile seats correctly in the original bore without shimming, trimming, or additional hardware.
- Broad Cross-Family Fitment — Covers VP1340R/RW, VP1550R/RW, VP2050R/RW, and AP1550R vibratory plates, plus BFS 1345B, BFS 1345BZ, and BFS 1350L floor saws — one part number spans multiple machines in your fleet.
- Protects Drive Components — A correctly seated shaft seal prevents oil or grease loss from the exciter housing or gearbox, protecting bearings and drive gears from contamination and premature wear.
- Genuine Wacker Neuson OEM Part — Part number 5000075294 is an authorized Wacker Neuson component, traceable to the original equipment build specification for the VP, AP, and BFS product families.
A shaft seal forms the dynamic barrier between a rotating shaft and the housing it passes through, retaining lubricant inside the assembly while keeping dirt, water, and debris out. On vibratory plate compactors, the exciter shaft seal is under constant stress from the high-frequency oscillation that drives compaction force — a degraded seal allows grease or oil to escape, starving internal components and accelerating wear. On floor saws, shaft seals protect the blade arbor and drive assembly from concrete slurry and grit ingestion. When a shaft seal begins to weep or fails completely, the result is contaminated bearings, overheated gears, and eventual drive failure — replacing it promptly with a correctly rated OEM seal is the most cost-effective way to restore the assembly to full working condition.
Part Details
| Part Number | 5000075294 |
|---|---|
| Old Part Number | 0075294 |
| Brand | Wacker Neuson |
| Part Type | Genuine OEM |
| Description | Shaft Seal 35 X 48 X 8 5B |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| Value Vibratory Plate, 13 kN, 400mm/15.5in | VP1340RW | 5000009034 |
| Value Vibratory Plate, 15 kN, 500mm/19.5in | VP1550RW | 5000009030 |
| Single Direction Plates | AP1550R | 5000009538 |
| Value Vibratory Plate, 15 kN, 500mm/19.5in | VP1550R | 5000009029 |
| Value Vibratory Plate, 13 kN, 400mm/15.5in | VP1340R | 5000009033 |
| Value Vibratory Plate, 20 kN, 500mm/19.5in | VP2050R | 5000009088 |
| Basic floor saw, ø 450mm/18in | BFS 1345B | 5000008909, 5000610142 |
| Petrol Floor Saw BFS 1350L | BFS 1350L | 5000008936 |
| Single Direction Asphalt Plate | VP2050RW | 5000009511 |
| BFS 1345 SAW,BZ | BFS 1345BZ | 5000610243 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
