Wacker Neuson

Wacker Neuson 5000075818 Intake Valve

$25.26
(No reviews yet) Write a Review
SKU:
5000075818 | 75818 | Wacker Neuson
Adding... The item has been added

The Wacker Neuson is a genuine OEM Intake Valve designed for a broad range of Wacker Neuson equipment, including CRT48 and CRT36 ride-on concrete trowels, CT48 walk-behind trowels, GP5600A and GP6600A portable generators, GPS5600A and GPS6600A generators, RD12A tandem rollers, BFS floor saws, and WB16A power buggies, among others. As a factory-sourced component, it is manufactured to the exact tolerances and material specifications set by Wacker Neuson, ensuring a direct, no-hassle installation in any compatible model. Cross-referencing part number against your machine's model and serial number before ordering is recommended to confirm fitment. This is the same intake valve supplied through authorized Wacker Neuson service channels.

Key Features

  • OEM-Spec Valve Geometry — Manufactured to Wacker Neuson's exact seat angle and stem dimensions, ensuring proper sealing and consistent compression across every engine cycle.
  • Drop-In Engine Replacement — Matches the original valve head diameter, stem length, and keeper groove profile for a straightforward swap without machining or shimming.
  • Wide Cross-Family Fitment — Covers CRT48 and CRT36 ride-on trowels, CT48 walk-behind trowels, GP/GPS 5600A and 6600A generators, RD12A tandem rollers, BFS floor saws, WB16A power buggies, and select BPU compactors.
  • Engine Breathing Performance — A correctly sealed intake valve maintains proper cylinder charge on every intake stroke; a worn or damaged valve causes rough running, hard starting, and progressive power loss.
  • Fuel System Safety Compliance — A properly seating intake valve prevents fuel wash-down of the cylinder walls and uncontrolled crankcase pressure buildup, both of which can create hazardous operating conditions.
  • Genuine Wacker Neuson Part — Sourced directly from Wacker Neuson, part number 5000075818 carries full OEM traceability and is backed by authorized dealer support.

The intake valve is a critical engine component that opens on each intake stroke to allow the air-fuel mixture into the combustion chamber, then closes and seals tightly during compression, combustion, and exhaust strokes. A correctly functioning intake valve maintains proper cylinder pressure, stable idle, and full power output. When an intake valve wears, burns, or fails to seat properly, the result is compression loss, rough idling, hard starting, and a significant drop in engine power — symptoms that, left unaddressed, can lead to more extensive internal engine damage.

Part Details

Part Number5000075818
Old Part Number0075818
BrandWacker Neuson
Part TypeGenuine OEM
DescriptionIntake Valve

Compatibility & Fitment

Name Model Machine Number
1220mm/48in Ride-on Trowel CRT48-34V 5000620805, 5000620075, 5200004935
915mm/36in Ride-On Trowel CRT36-24A 5000620080, 5000620299, 5000620802
RD12A-90 Tandem Roller RD12A-90 5000620058, 5000620320, 5000620369
GPS5600A,CAN GFI GPS5600A 5000620096, 5000620383, 5000620328, 5000620044, 5000620093, 5000620013, 5000620981
GPS6600A GENERATOR,CAN GFI GPS6600A 5000620102, 5000620386, 5000620331, 5000620047, 5000620099, 5000620016
CT48-13A-V Trowel CT48-13A-V 5000009452, 5000620836
CT48-11A Trowel CT48-11A 5000009450, 5000620835
Premium Portable Generator GP5600A 5000620094, 5000620095, 5000620326, 5000620327, 5000620381, 5000620382, 5000620042, 5000620043, 5000620091, 5000620092, 5000620011, 5000620012
GP6600A GENERATOR,CAN GFI GP6600A 5000620100, 5000620101, 5000620329, 5000620330, 5000620384, 5000620045, 5000620046, 5000620097, 5000620098, 5000620014, 5000620015
Premium Portable Generator GP6600 5000620385
G 7AI G7AI 5000009104
Single Drum Vibratory Roller RS800A 5000006581, 5000630011
Single Drum Vibratory Roller RSS800A 5000006582, 5000630012
Self-propelled Walk-behind Saw BFS 1318AS 5000620085
BFS 2020AS SAW BFS 2020AS 5000620086
Hydrostatic Double Drum Vibrat ory Roller RD11AEC 5000007695
915mm/36in Ride-On High Speed Trowel CRT36-24A-H 5000009232
Hydrostatic Double Drum Vibrat ory Roller RD11A 5000007693
Ride-on Trowel CRT36-24A-E 5000009483
1220mm/48in Walk-behind Trowel CT48AGP 5000007602, 5000007603
1220mm/48in CE Walk-behind Tro wel CT48AGP-E 5000008031, 5000008032
1220mm/48in CE Walk-behind Tro wel CT48AGT-E 5000007601, 5000008020
1220mm/48in Walk-behind Trowel CT48AGT 5000008019, 5000008041
GPS6600A Generator, CSA GPS6600 5000620988
50Hz Portable Generator with E lectric Start GS5.7AE 5000008285, 5000008279, 5000008281, 5000008283
Portable Generator with Electr ic Start GS5.6A 5000007191, 5000008046
50Hz Portable Generator G4.6A 5000008266, 5000008262, 5000008264, 5000008260
50Hz Portable Generator G4.6AE 5000008267, 5000008261, 5000008263, 5000008265, 5000008268
50Hz Portable Generator with E lectric Start GS4.6A 5000008275, 5000008271, 5000008273, 5000008269
50Hz Portable Generator with E lectric Start GS4.6AE 5000008276, 5000008270, 5000008272, 5000008274, 5000008277
50Hz Portable Generator with E lectric Start GS5.7A 5000008284, 5000008278, 5000008280, 5000008282
Portable Generator G5.6A 5000007190, 5000008045, 5000009431, 5000620008
50Hz Portable Generator G5.7AE 5000009015, 5000009019, 5000009017
1220mm/48in Variable Speed Wal k-behind Trowel CT48AVP 5000009219, 5000009220
50Hz Portable Generator G5.7A 5000009012, 5000009014, 5000009018, 5000009016
1220mm/48in Variable Speed Wal k-behind Trowel CT48AVT 5000009217, 5000009218
Reversible Vibratory Plate, 50 kN, 45cm/18in BPU 5045A 5000008545
Basic floor saw, 450mm/18in BFS 1345AB 5000008764, 5000610141
Power Buggy WB16AE 5000009284, 5000009042, 5000009266
Power Buggy WB16AEF 5000009290, 5000009046, 5000009272
Power Buggy WB16AES 5000009291, 5000009047, 5000009273
Power Buggy WB16AEFS 5000009296, 5000009052, 5000009278
Power Buggy WB16A 5000009282, 5000008021, 5000009264
Power Buggy WB16AF 5000009285, 5000008288, 5000009267
Power Buggy WB16AS 5000009286, 5000009043, 5000009268
Power Buggy WB16AFS 5000009292, 5000009048, 5000009274
BFS1350ALS-SAW BFS 1350ALS 5000008885, 5000610399
Gasoline Floor Saw, Ø 450 (350 ) BFS 100 5000007352
Gasoline Floor Saw, 450 drive, cutmatic BFS 1345AS 5000008699
Gasoline Floor Saw, 450 drive, cutmatic BFS 1345ALS 5000008700
Gasoline Floor Saw, Ø 500 driv e, cutmatic BFS 1350AS 5000008752
BFS1350AL-SAW BFS 1350AL 5000008898, 5000610398
50Hz Portable Value Generator GV7003A 5000009354, 5000009359
BFS 1318AB SAW BFS 1318AB 5000610091
50Hz Portable Generator 12 kVA GS12Ai 5000009108
50Hz Portable Value Generator GV7000A 5000009358, 5000009363
Gasoline Floor Saw, 450 cutmat ic BFS 1345A 5000008697
Gasoline Floor Saw, 450 cutmat ic BFS 1345AL 5000008698
Gasoline Floor Saw, Ø 500 cutm atic BFS 1350A 5000008751
Portable Generator with Electr ic Start, 50Hz GS5.7AI 5000009039
Portable Generator, 50Hz G5.7AI 5000009040
Power Buggy WB16AD 5000009283, 5000008022
Power Buggy WB16ADE 5000009287, 5000009044
Power Buggy WB16ADF 5000009288, 5000008289
Power Buggy WB16ADEF 5000009293, 5000009049
BFS 1345 SAW,ABZ BFS 1345ABZ 5000610242
Value Generator GV5600A 5000620410, 5000620288, 5000620335
50Hz Portable Generator with E lectric Start GS5.5A 5000007105
Gasoline Floor Saw, 350 cutmat ic BFS 1335A 5000008696
Portable Generator, 50Hz G4.6AI 5000009037
50Hz Portable Generator with E lectric Start GS4.6AI 5000009038
Power Buggy WB16ADS 5000009045
Power Buggy WB16ADES 5000009050
Power Buggy WB16ADFS 5000009051
Power Buggy WB16ADEFS 5000009053
Portable Generator G4.6AIT 5000009461
BPU5545A-VIBROPLATE BPU 5545A 5000610346
Value Generator, 60Hz GV6600A 5000620289, 5000620336
Vibratory Plate BPU 5545A US BPU 5545A US 5100000678

Verify Before You Order

Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.

Why Buy From DHS Equipment

Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.

Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.