The Wacker Neuson is a genuine OEM Governor Lever designed for a wide range of Wacker Neuson equipment, including BFS floor saws, CT and CRT concrete trowels, RD tandem rollers, BPU reversible vibratory plates, GP and GV portable generators, PT trash pumps, and WB power buggies. As a direct factory-sourced component, it is manufactured to the same specifications as the original part installed at production. This lever fits an extensive list of confirmed models — always verify your machine's model number and serial number before ordering to ensure correct application.
Key Features
- Genuine OEM Construction: — Manufactured by Wacker Neuson to original design tolerances, ensuring the lever geometry and pivot action match the engine's carburetor governor linkage exactly.
- Direct-Fit Replacement: — Drops into the existing governor linkage bracket without reworking the mounting point or adjusting surrounding hardware.
- Broad Cross-Family Fitment: — Confirmed across BFS floor saws, CT and CRT walk-behind and ride-on trowels, RD7 tandem rollers, BPU vibratory plates, GV and G-series generators, PT4A trash pumps, and WB power buggies.
- Engine Speed Regulation: — A correctly functioning governor lever keeps engine RPM stable under load, protecting the engine and maintaining consistent output from the driven machine.
- Fuel System Compliance: — Because the governor lever directly controls carburetor throttle position, using a correctly dimensioned OEM part is essential for safe, consistent fuel delivery and proper engine shutdown behavior.
The governor lever is a mechanical linkage component that connects the engine's centrifugal governor to the carburetor throttle. As engine load increases or decreases, the governor senses the change in crankshaft speed and moves the lever to open or close the throttle, keeping RPM steady. A worn, bent, or broken governor lever causes erratic engine speed, poor throttle response, and can prevent the engine from holding rated RPM under load — directly affecting the cutting, compaction, finishing, or pumping output of the machine it powers.
Part Details
| Part Number | 5000075845 |
|---|---|
| Old Part Number | 0075845 |
| Brand | Wacker Neuson |
| Part Type | Genuine OEM |
| Description | Governor Lever |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| BFS1345 | BFS1345 | 5100029230, 5100054575 |
| 1220mm/48in Ride-on Trowel | CRT48-34V | 5000620805, 5000620075, 5200004935 |
| CT48-11A Trowel | CT48-11A | 5000009450, 5000620835 |
| CT48-13A-V Trowel | CT48-13A-V | 5000009452, 5000620836 |
| G 7AI | G7AI | 5000009104 |
| Single Drum Vibratory Roller | RS800A | 5000006581, 5000630011 |
| Single Drum Vibratory Roller | RSS800A | 5000006582, 5000630012 |
| Self-propelled Walk-behind Saw | BFS 1318AS | 5000620085 |
| GV7000A | GV7000A | 5000009348, 5000009353, 5000009358, 5000009363, 5100006205 |
| 50Hz Portable Value Generator | GV7003A | 5000009349, 5000009364, 5000009354, 5000009359, 5100002155 |
| 1220mm/48in Walk-behind Trowel | CT48AGP | 5000007602, 5000007603 |
| 1220mm/48in CE Walk-behind Tro wel | CT48AGP-E | 5000008031, 5000008032 |
| RD7 Tandem Roller | RD7A | 5100017196, 5200015243, 5200015246 |
| 1220mm/48in CE Walk-behind Tro wel | CT48AGT-E | 5000007601, 5000008020 |
| 1220mm/48in Walk-behind Trowel | CT48AGT | 5000008019, 5000008041 |
| 50Hz Portable Generator with E lectric Start | GS5.7AE | 5000008285, 5000008279, 5000008281, 5000008283 |
| Portable Generator with Electr ic Start | GS5.6A | 5000007191, 5000008046 |
| 50Hz Portable Generator | G4.6A | 5000008266, 5000008262, 5000008264, 5000008260 |
| 50Hz Portable Generator | G4.6AE | 5000008267, 5000008261, 5000008263, 5000008265, 5000008268 |
| 50Hz Portable Generator with E lectric Start | GS4.6A | 5000008275, 5000008271, 5000008273, 5000008269 |
| 50Hz Portable Generator with E lectric Start | GS4.6AE | 5000008276, 5000008270, 5000008272, 5000008274, 5000008277 |
| 50Hz Portable Generator with E lectric Start | GS5.7A | 5000008284, 5000008278, 5000008280, 5000008282 |
| Portable Generator | G5.6A | 5000007190, 5000008045, 5000009431, 5000620008 |
| 50Hz Portable Generator | G5.7AE | 5000009015, 5000009019, 5000009017 |
| 1220mm/48in Variable Speed Wal k-behind Trowel | CT48AVP | 5000009219, 5000009220 |
| 50Hz Portable Generator | G5.7A | 5000009012, 5000009014, 5000009018, 5000009016 |
| 1220mm/48in Variable Speed Wal k-behind Trowel | CT48AVT | 5000009217, 5000009218 |
| Reversible Vibratory Plate, 50 kN, 45cm/18in | BPU 5045A | 5000008545 |
| Basic floor saw, 450mm/18in | BFS 1345AB | 5000008764, 5000610141 |
| Power Buggy | WB16AE | 5000009284, 5000009042, 5000009266 |
| Power Buggy | WB16AEF | 5000009290, 5000009046, 5000009272 |
| Power Buggy | WB16AES | 5000009291, 5000009047, 5000009273 |
| Power Buggy | WB16AEFS | 5000009296, 5000009052, 5000009278 |
| BFS1350 | BFS1350 CN | 5100042680 |
| BFS1350 | BFS1350 | 5100054576, 5100029231 |
| Power Buggy | WB16A | 5000009282, 5000008021, 5000009264 |
| Power Buggy | WB16AF | 5000009285, 5000008288, 5000009267 |
| Power Buggy | WB16AS | 5000009286, 5000009043, 5000009268 |
| Power Buggy | WB16AFS | 5000009292, 5000009048, 5000009274 |
| BFS1350ALS-SAW | BFS 1350ALS | 5000008885, 5000610399 |
| BFS 1318AB SAW | BFS 1318AB | 5000610091 |
| BPU5545A | BPU 5545A | 5100009657, 5000610346 |
| BPU 5545A US | BPU 5545A US | 5100009658, 5100000678 |
| Gasoline Floor Saw, Ø 450 (350 ) | BFS 100 | 5000007352 |
| Gasoline Floor Saw, 450 drive, cutmatic | BFS 1345AS | 5000008699 |
| Gasoline Floor Saw, 450 drive, cutmatic | BFS 1345ALS | 5000008700 |
| Gasoline Floor Saw, Ø 500 driv e, cutmatic | BFS 1350AS | 5000008752 |
| BFS1350AL-SAW | BFS 1350AL | 5000008898, 5000610398 |
| Floor Saws | BFSX20A | 5000630203 |
| BFS 1345 SAW,ABZ | BFS 1345ABZ | 5000610242 |
| Floor Saws | BFSX18A | 5000630188 |
| Gasoline Floor Saw, 450 cutmat ic | BFS 1345A | 5000008697, 5100004007 |
| Gasoline Floor Saw, 450 cutmat ic | BFS 1345AL | 5000008698 |
| Gasoline Floor Saw, Ø 500 cutm atic | BFS 1350A | 5000008751, 5100004011 |
| Portable Generator with Electr ic Start, 50Hz | GS5.7AI | 5000009039 |
| Portable Generator, 50Hz | G5.7AI | 5000009040 |
| Power Buggy | WB16AD | 5000009283, 5000008022 |
| Power Buggy | WB16ADE | 5000009287, 5000009044 |
| Power Buggy | WB16ADF | 5000009288, 5000008289 |
| Power Buggy | WB16ADEF | 5000009293, 5000009049 |
| Gasoline Floor Saw, 350 cutmat ic | BFS 1335A | 5000008696 |
| Portable Generator, 50Hz | G4.6AI | 5000009037 |
| 50Hz Portable Generator with E lectric Start | GS4.6AI | 5000009038 |
| Power Buggy | WB16ADS | 5000009045 |
| Power Buggy | WB16ADES | 5000009050 |
| Power Buggy | WB16ADFS | 5000009051 |
| Power Buggy | WB16ADEFS | 5000009053 |
| Portable Generator | G4.6AIT | 5000009461 |
| Petrol Floor Saw BFS 1350AB | BFS 1350AB | 5100000089 |
| Petrol Floor Saw BFS 1350ABZ | BFS 1350ABZ | 5100000091 |
| Floor Saw | BFS 1318A | 5100004006 |
| BFS1345Az Floor Saw | BFS 1345Az | 5100004008 |
| Gasoline Powered Floor Saw | BFS 1350Az | 5100004012 |
| RD7Af HRC | RD7Af HRC | 5100006342 |
| RD7Afb HRC | RD7Afb HRC | 5100006347 |
| BFS1350 | BFS 1350 | 5100009933 |
| BFS1345 Floor Saw | BFS 1345 | 5100009944 |
| PT4A | PT4A | 5100042217, 5100042604 |
| PT4A(I) | PT4A(I) | 5100042615 |
| BPU5260Ah | BPU5260Ah | 5100077265 |
| BPU6275Ah | BPU6275Ah | 5100077266 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
