The Wacker Neuson Fuse 15 Amp Blade Type is a genuine OEM electrical protection component designed for RD7 series walk-behind tandem rollers and GS/G series portable generators with electric start. As a direct OEM replacement, part is manufactured to the exact current rating and blade-terminal configuration required by the original circuit design. This fuse fits a wide range of Wacker Neuson equipment including the RD7He, RD7Ye, RD880V tandem rollers, and the GS4.6A, GS4.6AE, GS5.5A, GS5.6A, GS5.7A, GS5.7AE, G5.7A, and G5.7AE portable generator models. Keeping the correct fuse in place helps protect sensitive electrical circuits and ensures your machine returns to service quickly after a fault.
Key Features
- Correct 15-Amp Rating: — Matched to the original circuit load specifications for both the RD7 roller and GS/G generator electrical systems, preventing nuisance trips or under-protection.
- Blade-Terminal Design: — Standard blade-type fuse connects directly to the original fuse holder with no adapter or rewiring needed.
- Genuine OEM Component: — Sourced directly from Wacker Neuson, ensuring the part meets the same material and rating standards as the fuse installed at the factory.
- Broad Fitment Across Two Equipment Families: — A single part number covers RD7He, RD7Ye, and RD880V tandem rollers as well as multiple GS4.6A, GS5.7A, and G5.7A portable generator variants.
- Circuit Protection Integrity: — A correctly rated fuse safeguards control wiring, ignition circuits, and generator output components from damaging overcurrent events that can cause costly secondary failures.
- Electrical Safety Compliance: — Replacing a blown fuse with the OEM-specified 15-amp blade type maintains the designed protection level for the machine's electrical system, avoiding the hazards associated with incorrect ratings.
A blade-type fuse is a small but critical component in any machine's electrical system. It sits in the circuit as a sacrificial link — if current exceeds a safe level due to a short circuit or component fault, the fuse element melts and breaks the circuit before damage can reach wiring, control modules, or generator windings. Using a fuse with the correct amperage rating is essential: too low and the fuse blows under normal operating load; too high and it fails to protect the circuit when a real fault occurs. When a fuse blows on your RD7 roller or GS-series generator, replacing it with the correct Wacker Neuson 5000077219 restores proper protection and gets the machine running again.
Part Details
| Part Number | 5000077219 |
|---|---|
| Old Part Number | 0077219 |
| Brand | Wacker Neuson |
| Part Type | Genuine OEM |
| Description | Fuse 15 Amp Blade Type |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| RD7 Tandem Roller | RD7He | 5100017193, 5100017194, 5200015241, 5200015244, 5100038031, 5100018451 |
| Portable Generator with Electr ic Start | GS5.6A | 5000007191, 5000008046 |
| 50Hz Portable Generator with E lectric Start | GS4.6A | 5000008275, 5000008271, 5000008273, 5000008269 |
| 50Hz Portable Generator with E lectric Start | GS4.6AE | 5000008276, 5000008270, 5000008272, 5000008274, 5000008277 |
| 50Hz Portable Generator with E lectric Start | GS5.7A | 5000008284, 5000008278, 5000008280, 5000008282 |
| 50Hz Portable Generator with E lectric Start | GS5.7AE | 5000008281, 5000008285, 5000008279, 5000008283 |
| RD7Ye Tandem Roller | RD7Ye | 5100027116, 5100027117, 5100038032, 5100048340 |
| 50Hz Portable Generator | G5.7A | 5000009012, 5000009018, 5000009016 |
| 50Hz Portable Generator | G5.7AE | 5000009017, 5000009015, 5000009019 |
| Double Drum Vibratory Roller | RD880V | 5000006736 |
| Portable Generator with Electr ic Start, 50Hz | GS5.7AI | 5000009039 |
| 50Hz Portable Generator with E lectric Start | GS5.5A | 5000007105 |
| 50Hz Portable Generator with E lectric Start | GS4.6AI | 5000009038 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
