The Wacker Neuson Electric Jumper Wire Assembly is a genuine OEM component designed for the CT30, CT36, and CT48 series walk-behind concrete power trowels. As a direct OEM part, it is manufactured to the same specifications as the original, ensuring correct connector fit and electrical continuity within the trowel's wiring system. This assembly covers an extensive range of CT-series models, including gasoline, diesel, and variable-speed variants across 30-inch, 36-inch, and 48-inch blade sizes. Verify your model number against the fitment list to confirm compatibility before ordering.
Key Features
- Genuine OEM Electrical Spec: — Manufactured to original resistance and connector specifications, ensuring correct signal and power routing within the CT-series trowel electrical system.
- Direct Drop-In Replacement: — Connector ends and wire routing match the original harness layout, allowing straightforward installation without splicing or adapting terminals.
- Broad CT-Series Fitment: — Compatible with CT30, CT36, and CT48 walk-behind trowel models, including gasoline, diesel, electric-start, CE-rated, and variable-speed configurations.
- Restores Full Electrical Function: — A faulty or broken jumper wire can cause intermittent ignition faults, loss of throttle control, or complete electrical failure; replacing it restores normal trowel operation.
- Electrical Safety Compliance: — Using the correct OEM wire assembly maintains proper insulation ratings and grounding integrity, important for safe operation of engine control and ignition circuits on the trowel.
An electric jumper wire assembly provides a bridged electrical connection between two points in the trowel's wiring circuit, allowing control signals or power to route correctly through the machine's ignition, throttle, or safety-interlock system. When this assembly becomes damaged, corroded, or develops an open circuit, it can cause erratic engine behavior, failure to start, or loss of operator control response. Replacing it with the correct OEM part restores the intended circuit path and keeps the trowel's electrical system performing as designed.
Part Details
| Part Number | 5000079224 |
|---|---|
| Old Part Number | 0079224 |
| Brand | Wacker Neuson |
| Part Type | Genuine OEM |
| Description | Electric Jumper Wire Assembly |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| 915mm/36in CE Walk-behind Trow el | CT36AGP | 5000007596, 5000007595 |
| 915mm/36in CE Walk-behind Trow el | CT36AGP-E | 5000008036, 5000008026 |
| 915mm/36in CE Walk-behind Trow el | CT36ADP | 5000007592, 5000007591 |
| 915mm/36in CE Walk-behind Trow el | CT36ADP-E | 5000008034, 5000007697 |
| 1220mm/48in Walk-behind Trowel | CT48AGP | 5000007602, 5000007603 |
| 1220mm/48in CE Walk-behind Tro wel | CT48AGP-E | 5000008031, 5000008032 |
| 1220mm/48in Walk-behind Trowel | CT48ADP | 5000007598, 5000007599, 5000008199 |
| 1220mm/48in CE Walk-behind Tro wel | CT48ADP-E | 5000008027, 5000008028 |
| 762mm/30in CE Walk-behind Trow el | CT30AGT-E | 5000007589, 5000008004 |
| 762mm/30in CE Walk-behind Trow el | CT30AGT | 5000008006, 5000008003 |
| 762mm/30in CE Walk-behind Trow el | CT30ADT-E | 5000007587, 5000008002 |
| 1220mm/48in CE Walk-behind Tro wel | CT48AGT-E | 5000007601, 5000008020 |
| 762mm/30in CE Walk-behind Trow el | CT30ADT | 5000008005, 5000008001, 5000008197 |
| 1220mm/48in Walk-behind Trowel | CT48AGT | 5000008019, 5000008041 |
| 915mm/36in CE Walk-behind Trow el | CT36ADT-E | 5000007590, 5000008008, 5000008226 |
| 915mm/36in CE Walk-behind Trow el | CT36AGT-E | 5000007594, 5000008012 |
| 1220mm/48in CE Walk-behind Tro wel | CT48ADT-E | 5000007597, 5000008016 |
| 915mm/36in CE Walk-behind Trow el | CT36ADT | 5000008013, 5000008007, 5000008198, 5000008225, 5000009480 |
| 915mm/36in CE Walk-behind Trow el | CT36AGT | 5000008014, 5000008011 |
| 1220mm/48in Walk-behind Trowel | CT48ADT | 5000008015, 5000008040 |
| 1220mm/48in Walk-behind Trowel | CT48BDT | 5000008017 |
| 915mm/36in Walk-behind Trowel | CT36BDT | 5000008009 |
| 1220mm/48in Variable Speed Wal k-behind Trowel | CT48AVP | 5000009219, 5000009220 |
| 1220mm/48in Variable Speed Wal k-behind Trowel | CT48AVT | 5000009217, 5000009218 |
| 915mm/36in Variable Speed Walk #NAME? | CT36AVP | 5000009235, 5000009236 |
| 915mm/36in Variable Speed Walk #NAME? | CT36AVT | 5000009233, 5000009234 |
| 915mm/36in Walk-behind Trowel | CT36BDT-E | 5000008010 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
