The Wacker Neuson is a genuine OEM H35 Eccentric Shaft designed for the H35 vibrator head and compatible internal concrete vibrator drive units in the A5000, L5000, M1500, M2500, and A1500 series. As a factory-sourced component, it is manufactured to the same tolerances and material specifications as the original part. This shaft is confirmed to fit a wide range of Wacker Neuson concrete vibrator configurations, including ISO and ANSI variants of the A5000/160, L5000/225, A1500/035, and M2500 series. Keeping the in proper working condition is essential to maintaining effective concrete consolidation on the job.
Key Features
- Genuine OEM Eccentric Mass Geometry — Manufactured to the exact offset and balance specification of the original shaft, ensuring correct vibration frequency and amplitude output from the H35 vibrator head.
- Direct Drop-In Replacement — Engineered to install into the H35 vibrator head housing without rework, matching the original shaft diameter, length, and drive interface.
- Broad Series Compatibility — Fits H35 vibrator heads paired with A5000/160, L5000/225, M1500, M2500, and A1500/035 drive units in both ISO and ANSI configurations.
- Sustained Vibration Output — A correctly fitted eccentric shaft delivers consistent centrifugal force to consolidate concrete fully; a worn or damaged shaft results in erratic or reduced vibration, leaving voids in the pour.
- OEM-Grade Material Durability — Produced from the same material grade as the factory original, resisting the cyclic stress and heat buildup that rapidly degrade undersized or off-spec shafts.
The eccentric shaft is the core rotating component inside an internal concrete vibrator head. As it spins at high speed, its offset mass generates the centrifugal force that causes the vibrator head to oscillate and consolidate fresh concrete by driving out entrapped air and ensuring full aggregate encapsulation. When the eccentric shaft wears, cracks, or loses its balance, vibration amplitude drops or becomes irregular — resulting in inadequately consolidated concrete and potential structural defects in the finished pour. Replacing a damaged shaft with a genuine OEM part like the 5000080716 restores the vibrator head to its specified performance and protects the integrity of the concrete work.
Part Details
| Part Number | 5000080716 |
|---|---|
| Old Part Number | 0080716 |
| Brand | Wacker Neuson |
| Part Type | Genuine OEM |
| Description | H35 Eccentric Shaft |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| A5000/160 ISO | A5000/160 ISO | 5000610325 |
| A5000/160 ANSI | A5000/160 ANSI | 5000610340 |
| H35 Vibrator Head, 1 3/8 " | H 35 | 5000006568 |
| L5000/225 ISO | L5000/225 ISO | 5000610329 |
| A1500-POWER UNIT,HONDA,35CC | A1500/035 ISO | 5000610324 |
| A1500 POWER UNIT, HONDA | A1500/035 ANSI | 5000610339 |
| L5000/225 ANSI | L5000/225 ANSI | 5000610341 |
| M1500/120 | M1500/120 US | 5100004500 |
| M1500/230 | M1500/230 EU | 5100005142 |
| M1500/120 GB | M1500/120 GB | 5100005145 |
| M2500/120 | M2500/120 US | 5100006000 |
| M2500/230 | M2500/230 EU | 5100009717 |
| M2500/120 | M2500/120 GB | 5100010890 |
| Drive Engine | M2500/230 EU W | 5100047311 |
| A5000/160B | A5000/160B | 5100068212 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
