The Wacker Neuson Covering is a genuine OEM component designed for the CT36 and CT48 series walk-behind concrete power trowels. Sourced directly from Wacker Neuson, this part carries the same specifications as the original installed at the factory, ensuring a correct, trouble-free installation. Confirmed fitment spans a wide range of CT-series models including the CT36-8A, CT36-8A-V, CT48-8A, CT36AGP, CT36AGT, CT36AVP, CT36AVT, CT48ADP, and CT48ADT, among others. When it's time to replace a worn or damaged covering on your power trowel, part number is the verified replacement to reach for.
Key Features
- Genuine OEM Construction: — Manufactured to Wacker Neuson's original material and dimensional standards, ensuring the covering fits and performs exactly as the original component did from day one.
- Direct-Fit Replacement: — Matches the original mounting points and profile of the CT36 and CT48 trowel platforms, allowing straightforward swap-out without modification.
- Broad CT-Series Compatibility: — Verified across CT36 and CT48 walk-behind trowel families, including standard, CE, variable-speed, and engine-variant configurations in both 915mm/36in and 1220mm/48in sizes.
- Protects Internal Components: — A correctly fitted covering shields the trowel's mechanical and drive components from concrete splatter, debris, and moisture, helping to extend the service life of the machine's working parts.
- Maintains Safe Operating Conditions: — A damaged or missing covering on a power trowel can expose rotating components and create a hazard for the operator; replacing it promptly restores safe machine operation.
The covering on a walk-behind concrete power trowel serves as a protective guard and housing panel, shielding key mechanical components from exposure to wet concrete, slurry, and job-site debris during finishing operations. Without an intact covering, the machine's drive and gear components are vulnerable to accelerated wear and contamination, which can lead to premature failures and unplanned service. Keeping part number 5000081621 in good condition is a straightforward maintenance step that protects the broader machine investment.
Part Details
| Part Number | 5000081621 |
|---|---|
| Old Part Number | 0081621 |
| Brand | Wacker Neuson |
| Part Type | Genuine OEM |
| Description | Covering |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| CT36-8A-V Trowel | CT36-8A-V | 5000009442, 5000620832 |
| CT36-8A Trowel | CT36-8A | 5000009439, 5000620831 |
| CT48-8A Trowel | CT48-8A | 5000009449 |
| CT48-8A | CT48-8A EU | 5000620837 |
| 915mm/36in CE Walk-behind Trow el | CT36AGP | 5000007596, 5000007595 |
| 915mm/36in CE Walk-behind Trow el | CT36AGP-E | 5000008036, 5000008026 |
| 1220mm/48in Walk-behind Trowel | CT48ADP | 5000007598, 5000007599, 5000008199 |
| 1220mm/48in CE Walk-behind Tro wel | CT48ADP-E | 5000008027, 5000008028 |
| 915mm/36in CE Walk-behind Trow el | CT36AGT-E | 5000007594, 5000008012 |
| 1220mm/48in CE Walk-behind Tro wel | CT48ADT-E | 5000007597, 5000008016 |
| 915mm/36in CE Walk-behind Trow el | CT36AGT | 5000008014, 5000008011 |
| 1220mm/48in Walk-behind Trowel | CT48ADT | 5000008015, 5000008040 |
| 915mm/36in Variable Speed Walk #NAME? | CT36AVP | 5000009235, 5000009236 |
| HPG100A | HPG100A | 5000009507 |
| 75mm/3in Centrifugal Trash Pum p | PT3A | 5000006729, 5000006730, 5100058535, 5100058536 |
| 915mm/36in Variable Speed Walk #NAME? | CT36AVT | 5000009233, 5000009234 |
| Single Direction Vibratory Pla te, 25kN, 50cm/20in | BPS 2550A | 5000007528 |
| HPG50A | HPG50A | 5000009509 |
| Gasoline Floor Saw, Ø 350 | BFS 80 | 5000006654 |
| Reversible Plates | MPU 29A | 5000630244 |
| Vibration Plate BPU 2950A WSM | BPU 2950A | 5000007873, 5000007962 |
| Vibratory Truss Screed, Power Section | HPG100 | 5000008293 |
| Vibratory Truss Screed, Power Section | HPG50 | 5000008294 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
