The Wacker Neuson Cylinder Head Gasket is a genuine OEM component designed for a wide range of Wacker Neuson equipment powered by compatible small engines, including the CT36 and CT48 series walk-behind concrete trowels, PT3A centrifugal trash pumps, GP3800A and G3.7A portable generators, and associated power units. As a direct OEM replacement, part is manufactured to the same specification as the original, ensuring a correct seal between the cylinder head and engine block. This gasket is used across a broad cross-section of Wacker Neuson equipment, making it a practical stocking item for service technicians and fleet operators who run multiple machine types.
Key Features
- OEM-Grade Sealing Material — Engineered to the same combustion pressure and temperature tolerances as the original gasket, maintaining consistent compression across the cylinder head mating surface.
- Drop-In Engine Fit — Matches the original bolt pattern and head profile exactly, allowing straightforward installation without trimming or adaptation during engine reassembly.
- Broad Equipment Coverage — A single part number covers CT36 and CT48 walk-behind trowels, PT3A trash pumps, GP3800A and G3.3A/G3.7A portable generators, HPG50/HPG100 power units, and select BPS and MPU plate compactors sharing the same engine family.
- Compression Integrity Restored — A compromised head gasket causes loss of compression, coolant or oil contamination, and rough or failed engine starts; replacing it with 5000081624 restores proper combustion and engine output.
- Combustion Seal Safety — A failed head gasket can allow combustion gases to escape near fuel system components; using the correct OEM gasket ensures the combustion chamber is properly sealed during engine operation.
The cylinder head gasket sits between the engine block and the cylinder head, forming a high-pressure seal that keeps combustion gases contained within the cylinder while preventing engine oil and — where applicable — coolant from mixing or leaking. It must withstand repeated thermal cycling and the mechanical clamping force of the head bolts across the full service life of the engine. When a head gasket fails or deteriorates, the engine typically loses compression, runs unevenly, or may refuse to start altogether; in more serious cases, oil or combustion gases can escape into areas of the engine where they cause secondary damage, making timely replacement essential to avoiding a more costly repair.
Part Details
| Part Number | 5000081624 |
|---|---|
| Old Part Number | 0081624 |
| Brand | Wacker Neuson |
| Part Type | Genuine OEM |
| Description | Cylinder Head Gasket |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| CT36-8A-V Trowel | CT36-8A-V | 5000009442, 5000620832 |
| CT36-8A Trowel | CT36-8A | 5000009439, 5000620831 |
| CT48-8A Trowel | CT48-8A | 5000009449 |
| Portable Generator | GP3800A | 5000620104, 5000620379, 5000620485, 5000620342, 5000620484, 5000620041, 5000620103, 5000620010 |
| CT48-8A | CT48-8A EU | 5000620837 |
| PT3A | PT3A | 5000009101, 5000009240, 5000009098, 5000620800, 5000006729, 5000006730, 5100058535, 5100058536 |
| 915mm/36in CE Walk-behind Trow el | CT36AGP | 5000007596, 5000007595 |
| 915mm/36in CE Walk-behind Trow el | CT36AGP-E | 5000008036, 5000008026 |
| 1220mm/48in Walk-behind Trowel | CT48ADP | 5000007598, 5000007599, 5000008199 |
| 1220mm/48in CE Walk-behind Tro wel | CT48ADP-E | 5000008027, 5000008028 |
| 915mm/36in CE Walk-behind Trow el | CT36AGT-E | 5000007594, 5000008012 |
| 1220mm/48in CE Walk-behind Tro wel | CT48ADT-E | 5000007597, 5000008016 |
| 915mm/36in CE Walk-behind Trow el | CT36AGT | 5000008014, 5000008011 |
| 1220mm/48in Walk-behind Trowel | CT48ADT | 5000008015, 5000008040 |
| 50Hz Portable Generator | G3.3A | 5000008257, 5000008253, 5000008255, 5000008251 |
| 50Hz Portable Generator | G3.3AE | 5000008258, 5000008252, 5000008254, 5000008256, 5000008259 |
| Portable Generator | G3.7A | 5000007189, 5000008044 |
| 915mm/36in Variable Speed Walk #NAME? | CT36AVP | 5000009235, 5000009236 |
| HPG100A | HPG100A | 5000009507 |
| 915mm/36in Variable Speed Walk #NAME? | CT36AVT | 5000009233, 5000009234 |
| Single Direction Vibratory Pla te, 25kN, 50cm/20in | BPS 2550A | 5000007528 |
| HPG50A | HPG50A | 5000009509 |
| Reversible Plates | MPU 29A | 5000630244 |
| Portable Generator, 50Hz | G3.3AI | 5000009036 |
| Value Generator | GV3800A | 5000620409, 5000620287, 5000620334 |
| Vibratory Truss Screed, Power Section | HPG100 | 5000008293 |
| Vibratory Truss Screed, Power Section | HPG50 | 5000008294 |
| Portable Generator | G3.3AIT | 5000009460 |
| GP3800A Generator, EPA | GP3800 | 5000620974, 5000620975, 5000620976 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
