The Wacker Neuson Fuel Filter is a genuine OEM component designed for a wide range of Wacker Neuson concrete trowels, trash pumps, vibratory plate compactors, and single-drum vibratory rollers — including the CRT48-34V ride-on trowel series, CT48 walk-behind trowel family, PT3A centrifugal trash pump, BPU 3050A, BPU 3545A, BPU 5045A, BPS1135A, and RS800A/RSS800A roller models. As a direct Wacker Neuson OEM part, the is manufactured to the same standards as the original filter installed at the factory. Whether you're servicing a concrete finishing machine or a compaction unit, this fuel filter delivers the correct fit and flow characteristics needed to keep your engine running clean. Confirm part number against your machine's serial number and model plate before ordering to ensure compatibility.
Key Features
- Genuine OEM Filtration Media — Manufactured to Wacker Neuson's original filtration specification, ensuring the correct micron rating and flow capacity for each compatible engine application.
- Direct-Fit Replacement — Engineered to match the original inlet/outlet dimensions and mounting configuration, so installation requires no modification to existing fuel lines or fittings.
- Broad Cross-Family Compatibility — Fits CT48 and CRT48 concrete trowels, PT3A trash pumps, BPU and BPS vibratory plate compactors, RS800A/RSS800A single-drum rollers, and PG2A/PG3A models in a single part number.
- Protects Carburetor and Fuel System Integrity — Blocks debris, sediment, and contaminants before they reach the carburetor or fuel injector, preventing premature wear, lean-running conditions, and hard-start issues.
- Fuel System Safety — A correctly sealed, OEM-spec fuel filter maintains proper line pressure and prevents fuel seepage — an important consideration on engine-powered equipment operating near concrete, aggregates, and other combustibles.
The fuel filter's job is to trap dirt, rust particles, and other contaminants from the fuel supply before they can reach the engine's carburetor or fuel metering system. On small gasoline-powered equipment, even fine debris can clog jets and passages, leading to rough running, loss of power, or failure to start. A degraded or blocked fuel filter restricts fuel flow and starves the engine, while a cracked or poorly seated filter can allow unfiltered fuel — and potential leaks — past the element. Replacing the filter at regular service intervals is one of the simplest ways to protect the engine and maintain consistent performance across all the machine families this part serves.
Part Details
| Part Number | 5000081635 |
|---|---|
| Old Part Number | 0081635 |
| Brand | Wacker Neuson |
| Part Type | Genuine OEM |
| Description | Fuel Filter |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| 1220mm/48in Ride-on Trowel | CRT48-34V | 5000620805, 5000620075, 5200004935 |
| CT48-13A-V Trowel | CT48-13A-V | 5000009452, 5000620836 |
| CT48-11A Trowel | CT48-11A | 5000009450, 5000620835 |
| PT3A | PT3A | 5000009101, 5000009240, 5000009098, 5000620800 |
| Single Drum Vibratory Roller | RS800A | 5000006581, 5000630011 |
| Single Drum Vibratory Roller | RSS800A | 5000006582, 5000630012 |
| PG2A | PG2A | 5000007658, 5000009054 |
| PG3A | PG3A | 5000007659, 5000009055 |
| 1220mm/48in Walk-behind Trowel | CT48AGP | 5000007602, 5000007603 |
| 1220mm/48in CE Walk-behind Tro wel | CT48AGP-E | 5000008031, 5000008032 |
| 1220mm/48in CE Walk-behind Tro wel | CT48AGT-E | 5000007601, 5000008020 |
| 1220mm/48in Walk-behind Trowel | CT48AGT | 5000008019, 5000008041 |
| 1220mm/48in Variable Speed Wal k-behind Trowel | CT48AVP | 5000009219, 5000009220 |
| 1220mm/48in Variable Speed Wal k-behind Trowel | CT48AVT | 5000009217, 5000009218 |
| Reversible Vibratory Plate, 50 kN, 45cm/18in | BPU 5045A | 5000008545 |
| Reversible Vibratory Plate, 35 kN, 45cm/18in | BPU 3545A | 5000008783 |
| BPU 3050A | BPU 3050A | 5000008763 |
| Single Direction Vibratory Pla te, 11kN, 35cm/14in | BPS1135A | 5000007425 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
