The Wacker Neuson Gasket is a genuine OEM component designed for an exceptionally wide range of Wacker Neuson equipment, including CT36 and CT48 walk-behind concrete trowels, CRT48 ride-on trowels, PT3A centrifugal trash pumps, BFS floor saws, G and GS series portable generators, BPU reversible vibratory plates, BPS single-direction vibratory plates, and WB16 power buggies. Sourced directly from Wacker Neuson, this gasket meets the exact material and dimensional specifications of the original part. Whether you are servicing a concrete finishing machine or restoring a pump or generator to working condition, part number delivers a verified fitment you can rely on. Confirm your model number against the fitment list before ordering to ensure compatibility with your specific machine configuration.
Key Features
- Genuine OEM Material Integrity — Manufactured to Wacker Neuson's original compound and thickness specifications, ensuring the correct compression and sealing performance for the mating surfaces on your machine.
- Broad Cross-Family Fitment — A single part number covering CT36 and CT48 walk-behind trowels, CRT48 ride-on trowels, PT3A trash pumps, BFS floor saws, G/GS portable generators, BPU/BPS vibratory plates, and WB16 power buggies.
- Drop-In Service Replacement — Matches the original gasket profile and bolt-hole pattern, seating correctly between mating surfaces without trimming or shimming.
- Leak Prevention Where It Counts — A failed or degraded gasket allows fluid or pressure loss at critical joints. Replacing with the correct OEM gasket restores a proper seal and protects internal components from contamination or damage.
- Verified Part Number — Cross-referenced directly to Wacker Neuson OEM documentation as part 5000081640, eliminating guesswork when ordering a service replacement.
A gasket forms a static seal between two mating surfaces — such as an engine cover, pump housing, or equipment casing — preventing the escape of fluids, gases, or pressure at the joint. It works by conforming to minor surface irregularities under clamping load, filling any gaps that would otherwise allow leaks. When a gasket deteriorates, compresses unevenly, or is damaged during service, it can no longer maintain that seal, leading to fluid leaks, pressure loss, or contamination ingress that accelerates wear on surrounding components. Replacing a worn gasket promptly with the correct OEM part is one of the most straightforward ways to keep a machine operating within its intended performance range.
Part Details
| Part Number | 5000081640 |
|---|---|
| Old Part Number | 0081640 |
| Brand | Wacker Neuson |
| Part Type | Genuine OEM |
| Description | Gasket |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| 1220mm/48in Ride-on Trowel | CRT48-34V | 5000620805, 5000620075, 5200004935 |
| CT36-8A-V | CT36-8A-V | 5000620832, 5000009442 |
| CT36-8A Trowel | CT36-8A | 5000009439, 5000620831 |
| CT48-8A Trowel | CT48-8A | 5000009449 |
| CT48-8A | CT48-8A EU | 5000620837 |
| 75mm/3in Centrifugal Trash Pum p | PT3A | 5000009098, 5000009101, 5000009240, 5000620800, 5000006729, 5000006730, 5100058535, 5100058536, 5100042216 |
| G 7AI | G7AI | 5000009104 |
| CT48-13A-V Trowel | CT48-13A-V | 5000009452, 5000620836 |
| CT48-11A Trowel | CT48-11A | 5000009450, 5000620835 |
| Single Drum Vibratory Roller | RS800A | 5000006581, 5000630011 |
| Single Drum Vibratory Roller | RSS800A | 5000006582, 5000630012 |
| Self-propelled Walk-behind Saw | BFS 1318AS | 5000620085 |
| 915mm/36in CE Walk-behind Trow el | CT36AGP | 5000007596, 5000007595 |
| 915mm/36in CE Walk-behind Trow el | CT36AGP-E | 5000008036, 5000008026 |
| 1220mm/48in Walk-behind Trowel | CT48AGP | 5000007602, 5000007603 |
| 1220mm/48in CE Walk-behind Tro wel | CT48AGP-E | 5000008031, 5000008032 |
| 1220mm/48in Walk-behind Trowel | CT48ADP | 5000007598, 5000007599, 5000008199 |
| 1220mm/48in CE Walk-behind Tro wel | CT48ADP-E | 5000008027, 5000008028 |
| 1220mm/48in CE Walk-behind Tro wel | CT48AGT-E | 5000007601, 5000008020 |
| 1220mm/48in Walk-behind Trowel | CT48AGT | 5000008019, 5000008041 |
| 915mm/36in CE Walk-behind Trow el | CT36AGT-E | 5000007594, 5000008012 |
| 1220mm/48in CE Walk-behind Tro wel | CT48ADT-E | 5000007597, 5000008016 |
| 915mm/36in CE Walk-behind Trow el | CT36AGT | 5000008014, 5000008011 |
| 1220mm/48in Walk-behind Trowel | CT48ADT | 5000008015, 5000008040 |
| 50Hz Portable Generator | G3.3A | 5000008257, 5000008253, 5000008255, 5000008251 |
| 50Hz Portable Generator | G3.3AE | 5000008258, 5000008252, 5000008254, 5000008256, 5000008259 |
| 50Hz Portable Generator with E lectric Start | GS5.7AE | 5000008285, 5000008279, 5000008281, 5000008283 |
| Portable Generator with Electr ic Start | GS5.6A | 5000007191, 5000008046 |
| 50Hz Portable Generator | G4.6A | 5000008266, 5000008262, 5000008264, 5000008260 |
| 50Hz Portable Generator | G4.6AE | 5000008267, 5000008261, 5000008263, 5000008265, 5000008268 |
| 50Hz Portable Generator with E lectric Start | GS4.6A | 5000008275, 5000008271, 5000008273, 5000008269 |
| 50Hz Portable Generator with E lectric Start | GS4.6AE | 5000008276, 5000008270, 5000008272, 5000008274, 5000008277 |
| 50Hz Portable Generator with E lectric Start | GS5.7A | 5000008284, 5000008278, 5000008280, 5000008282 |
| Portable Generator | G3.7A | 5000007189, 5000008044 |
| Portable Generator | G5.6A | 5000007190, 5000008045, 5000009431, 5000620008 |
| BPU 3050A | BPU 3050A | 5000008763 |
| 50Hz Portable Generator | G5.7AE | 5000009015, 5000009019, 5000009017 |
| 1220mm/48in Variable Speed Wal k-behind Trowel | CT48AVP | 5000009219, 5000009220 |
| 50Hz Portable Generator | G5.7A | 5000009012, 5000009014, 5000009018, 5000009016 |
| 1220mm/48in Variable Speed Wal k-behind Trowel | CT48AVT | 5000009217, 5000009218 |
| Reversible Vibratory Plate, 50 kN, 45cm/18in | BPU 5045A | 5000008545 |
| Reversible Vibratory Plate, 35 kN, 45cm/18in | BPU 3545A | 5000008783 |
| 915mm/36in Variable Speed Walk #NAME? | CT36AVP | 5000009235, 5000009236 |
| HPG100A | HPG100A | 5000009507 |
| BPU 3050A US | BPU 3050A US | 5000610361 |
| Basic floor saw, 450mm/18in | BFS 1345AB | 5000008764, 5000610141 |
| BFS 935A SAW,BASIC | BFS 935AB | 5000008910 |
| 915mm/36in Variable Speed Walk #NAME? | CT36AVT | 5000009233, 5000009234 |
| Power Buggy | WB16AE | 5000009284, 5000009042, 5000009266 |
| Power Buggy | WB16AEF | 5000009290, 5000009046, 5000009272 |
| Power Buggy | WB16AES | 5000009291, 5000009047, 5000009273 |
| Power Buggy | WB16AEFS | 5000009296, 5000009052, 5000009278 |
| Single Direction Vibratory Pla te, 25kN, 50cm/20in | BPS 2550A | 5000007528 |
| HPG50A | HPG50A | 5000009509 |
| Power Buggy | WB16A | 5000009282, 5000008021, 5000009264 |
| Power Buggy | WB16AF | 5000009285, 5000008288, 5000009267 |
| Power Buggy | WB16AS | 5000009286, 5000009043, 5000009268 |
| Power Buggy | WB16AFS | 5000009292, 5000009048, 5000009274 |
| BPU 3750Ats | BPU 3750Ats | 5000610408 |
| BPU3750Ats | BPU 3750Ats US | 5000610423 |
| BFS1350ALS-SAW | BFS 1350ALS | 5000008885, 5000610399 |
| Gasoline Reversible Vibratory Plate | BPU 3050 | 5000008955 |
| BFS 1318AB SAW | BFS 1318AB | 5000610091 |
| BFS 914AB SAW | BFS 914AB | 5000610092 |
| BPU 4045A US | BPU 4045A US | 5100009663, 5000610403 |
| Gasoline Floor Saw, 450 drive, cutmatic | BFS 1345AS | 5000008699 |
| Gasoline Floor Saw, 450 drive, cutmatic | BFS 1345ALS | 5000008700 |
| Gasoline Floor Saw, Ø 500 driv e, cutmatic | BFS 1350AS | 5000008752 |
| BFS1350AL-SAW | BFS 1350AL | 5000008898, 5000610398 |
| Floor Saws | BFSX20A | 5000630203 |
| BFS 1345 SAW,ABZ | BFS 1345ABZ | 5000610242 |
| Petrol Floor Saw BFS 940A | BFS 940A | 5000610327, 5100004004 |
| Floor Saws | BFSX18A | 5000630188 |
| Reversible Plates | MPU 29A | 5000630244 |
| Gasoline Floor Saw, 450 cutmat ic | BFS 1345A | 5000008697, 5100004007 |
| Gasoline Floor Saw, 450 cutmat ic | BFS 1345AL | 5000008698 |
| Gasoline Floor Saw, Ø 500 cutm atic | BFS 1350A | 5000008751, 5100004011 |
| Portable Generator, 50Hz | G3.3AI | 5000009036 |
| Portable Generator with Electr ic Start, 50Hz | GS5.7AI | 5000009039 |
| Portable Generator, 50Hz | G5.7AI | 5000009040 |
| Power Buggy | WB16AD | 5000009283, 5000008022 |
| Power Buggy | WB16ADE | 5000009287, 5000009044 |
| Power Buggy | WB16ADF | 5000009288, 5000008289 |
| Power Buggy | WB16ADEF | 5000009293, 5000009049 |
| Vibratory plate BPU 4045A | BPU 4045A | 5000610345 |
| BPU5545A-VIBROPLATE | BPU 5545A | 5000610346, 5100009657 |
| Vibratory Plate BPU 5545A US | BPU 5545A US | 5100000678, 5100009658 |
| Vibratory Truss Screed, Power Section | HPG100 | 5000008293 |
| Vibratory Truss Screed, Power Section | HPG50 | 5000008294 |
| Gasoline Floor Saw, 350 cutmat ic | BFS 935A | 5000008694 |
| Gasoline Floor Saw, 350 cutmat ic | BFS 935AL | 5000008695 |
| Gasoline Floor Saw, 350 cutmat ic | BFS 1335A | 5000008696 |
| Portable Generator, 50Hz | G4.6AI | 5000009037 |
| 50Hz Portable Generator with E lectric Start | GS4.6AI | 5000009038 |
| Power Buggy | WB16ADS | 5000009045 |
| Power Buggy | WB16ADES | 5000009050 |
| Power Buggy | WB16ADFS | 5000009051 |
| Power Buggy | WB16ADEFS | 5000009053 |
| Portable Generator | G3.3AIT | 5000009460 |
| Portable Generator | G4.6AIT | 5000009461 |
| BPU3545A-VIBROPLATE | BPU 3545A US | 5000610362 |
| Petrol Floor Saw BFS 1350AB | BFS 1350AB | 5100000089 |
| Petrol Floor Saw BFS 1350ABZ | BFS 1350ABZ | 5100000091 |
| Floor Saw | BFS 914A | 5100004002 |
| Floor Saw | BFS 1318A | 5100004006 |
| BFS1345Az Floor Saw | BFS 1345Az | 5100004008 |
| Gasoline Powered Floor Saw | BFS 1350Az | 5100004012 |
| BFS1350 | BFS 1350 | 5100009933 |
| Floor saw BFS940 | BFS 940 | 5100009934 |
| BFS1345 Floor Saw | BFS 1345 | 5100009944 |
| BFS940 | BFS940 | 5100029229 |
| BFS1345 | BFS1345 | 5100029230 |
| BFS1350 | BFS1350 | 5100029231 |
| Vibration Plate | BPU3050A CN | 5100039661 |
| PT3A(I) | PT3A(I) | 5100042614 |
| BT48A | BT48A | 5100081471 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
