The Wacker Neuson is a genuine OEM Starter Housing designed for a wide range of Wacker Neuson gasoline-powered equipment, including PT2A trash pumps, CT24, CT30, and CT36 series walk-behind power trowels, WP and VP series single-direction vibratory plates, BPU reversible vibratory plates, G and GV series portable generators, PDT and PDI diaphragm pumps, and several vibratory truss screed power sections. As a direct OEM replacement sourced from Wacker Neuson, part is manufactured to the same specifications as the original component installed at the factory. This housing is a critical structural component of the recoil starter assembly, and using the correct OEM part ensures proper starter cord alignment, reliable engagement, and a secure fit to the engine case. Always confirm your machine's model number and serial number before ordering to ensure compatibility.
Key Features
- Genuine OEM Construction: — Manufactured by Wacker Neuson to original design tolerances, ensuring the housing shell properly retains the recoil spring, pulley, and pawl assembly without distortion or stress cracking under repeated pull-start use.
- Drop-In Housing Replacement: — Mounts directly to the engine blower cover using the original bolt pattern; no drilling, recutting, or adapter hardware needed for supported models.
- Broad Cross-Family Coverage: — A single part number covering PT2A trash pumps, CT24/CT30/CT36 trowels, WP/VP/BPU vibratory compaction plates, G2.1A/G2.5A/GV2500A generators, PDT/PDI diaphragm pumps, and HP/SP screed power sections.
- Sustained Start Performance: — A properly seated starter housing keeps the recoil mechanism aligned so the rope feeds and retracts cleanly on every pull; a cracked or warped housing leads to rope binding, failed engagement, and an engine that won't start at all.
- Fuel System Proximity Compliance: — Because the starter housing sits adjacent to the carburetor and fuel lines, using an OEM-spec housing with correct ventilation geometry helps prevent heat concentration and rope friction that could pose a fire risk on a worn or ill-fitting aftermarket shell.
The starter housing forms the outer shell of the recoil starter assembly mounted to the engine. It encloses and protects the recoil spring, starter pulley, and engagement pawls that spin the engine over on each pull of the starter cord. When the housing becomes cracked, warped, or broken — often from repeated drops or impact on a busy jobsite — the internal components lose their alignment, causing the rope to jam, the pulley to wobble, or the pawls to fail to engage the flywheel. Replacing the housing with a correct-fit OEM part restores the full recoil starter function and gets the engine back to reliable first-pull starting.
Part Details
| Part Number | 5000081772 |
|---|---|
| Old Part Number | 0081772 |
| Brand | Wacker Neuson |
| Part Type | Genuine OEM |
| Description | Starter Housing |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| 50mm/2in Diaphragm Trash Pump | PDT2A | 5000007610, 5000007611 |
| 75mm/3in Diaphragm Trash Pump | PDT3A | 5000007614, 5000007615, 5000007616 |
| 50mm/2in Inline Diaphragm Tras h Pump | PDI2A | 5000007624, 5000007625 |
| 75mm/3in Inline Diaphragm Tras h Pump | PDI3A | 5000007628, 5000007629, 5000009407 |
| PT2A | PT2A | 5000009095, 5000009237, 5000009092, 5000006720, 5000006721 |
| PG2A | PG2A | 5000007658, 5000009054 |
| PG3A | PG3A | 5000007659, 5000009055 |
| CT24-4A Trowel | CT24-4A | 5000620105 |
| 610mm/24 inch Walk-behind Trow el | CT24-4A EU | 5000620849 |
| GV2500A | GV2500A | 5000009345, 5000009350, 5000009355, 5000009360 |
| 915mm/36in CE Walk-behind Trow el | CT36ADP | 5000007592, 5000007591 |
| 915mm/36in CE Walk-behind Trow el | CT36ADP-E | 5000008034, 5000007697 |
| 762mm/30in CE Walk-behind Trow el | CT30AGT-E | 5000007589, 5000008004 |
| 762mm/30in CE Walk-behind Trow el | CT30AGT | 5000008006, 5000008003 |
| Vibratory Plate, 15kN, 400mm/1 5.5in | WP1540AW | 5000008060, 5000009472, 5000009545 |
| WP1540A VIBROPLATE | WP1540A | 5000008061, 5000630017 |
| Vibratory Plate, 15 kN, 500mm/ 19.5in | WP1550AW | 5000007576, 5000009486 |
| WP1550A Single Direction Vibratory Plate | WP1550A | 5000007579, 5000630019 |
| 762mm/30in CE Walk-behind Trow el | CT30ADT | 5000008005, 5000008001, 5000008197 |
| 915mm/36in CE Walk-behind Trow el | CT36ADT-E | 5000007590, 5000008008, 5000008226 |
| 915mm/36in CE Walk-behind Trow el | CT36ADT | 5000008013, 5000008007, 5000008198, 5000008225, 5000009480 |
| VP1550AW VIBROPLATE | VP1550AW | 5000009028, 5000630055 |
| VP1340AW VIBROPLATE | VP1340AW | 5000009032, 5000630058 |
| VP1550A Single Direction Vibratory Plate | VP1550A | 5000009027, 5000630054 |
| VP1135AW VIBROPLATE | VP1135AW | 5000009058 |
| VP2050A VIBROPLATE | VP2050A | 5000009087, 5000630062 |
| WPU1550A | WPU1550A | 5000630033 |
| WPU1550Aw | WPU1550Aw | 5000630034 |
| VP1135A VIBROPLATE | VP1135A | 5000009057 |
| Gasoline Power Unit for Intern al Vibrator | A3000 | 5000006237 |
| Vibratory Plate | VPA1740 | 5000006794, 5000008062 |
| Vibratory Plate 587mm/18in | VPG165A | 5000008038 |
| 50Hz Portable Generator | G2.1AE | 5000008250, 5000008244, 5000008246, 5000008248 |
| WPP 1550Aw | WPP1550Aw | 5000630030 |
| Vibratory Plate | VPA1750 | 5000006792 |
| 762mm/30in CE Walk-behind Trow el | CT30ADT-E | 5000007587, 5000008002 |
| Vibratory Plate 587mm/18in | VPG170A | 5000008039 |
| 50Hz Portable Generator | G2.1A | 5000008249, 5000008243, 5000008245, 5000008247 |
| Single Direction Plates | AP1550AW | 5000009540 |
| WPP 1540A | WPP1540A | 5000630025 |
| WPP 1550A | WPP1550A | 5000630029 |
| Portable Generator | G2.5A | 5000007188, 5000009256 |
| 50Hz Portable Generator | G5.7AE | 5000009017 |
| WP 2050A | WP2050A | 5000630022 |
| WPP 1540Aw | WPP1540Aw | 5000630026 |
| Single Direction Plates | AP1550A | 5000009539 |
| VP2050AW VIBROPLATE | VP2050AW | 5000009510 |
| Single Direction Plates | WP1550Aw | 5000630112 |
| Single Direction Plate | WP2050Aw | 5000630115 |
| Single Direction Plates | WP1540Aw-L | 5000630123 |
| Reversible Plates | WPU 1550A-L | 5000630124 |
| Single Direction Plates | WP1550Aw-L | 5000630126 |
| Vibratory Plate 500mm/19.5in | VPA1350W | 5000006793 |
| Floor Saws | BFS 614AB | 5000009527 |
| CT36-5A-C Trowel | CT36-5A-C | 5000620040 |
| Single Direction Plates | WP1540Aw | 5000630106 |
| Vibratory Plate 400mm/15.5in | VPA1340 | 5000007154 |
| BPU2540A | BPU 2540A | 5000008758 |
| Gasoline Power Unit for Intern al Vibrator | A5000 | 5000009213 |
| Single Drum Vibratory Roller | RS600A | 5000630010 |
| Single direction vibratory plate VP1340A | VP1340A | 5000630057 |
| Single Direction Plates | WP2050Aw-L | 5000630125 |
| Reversible Vibratory Plate, 24 kN, 40cm/16in | BPU 2440A | 5000007867, 5000007869 |
| Vibration Plate BPU 2450A | BPU 2450A | 5000007868 |
| Vibratory Truss Screed, Power Section | HP100 | 5000008291 |
| Vibratory Truss Screed, Power Section | HP50 | 5000008292 |
| Vibratory Truss Screed, Power Section | SP75 | 5000008295 |
| Vibratory Truss Screed, Power Section | SP50 | 5000008296 |
| Vibratory Truss Screed, Power Section | HP100A | 5000009506 |
| HP50A | HP50A | 5000009508 |
| Single direction vibratory plate WP1235A | WP1235A | 5000630016 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.