The Wacker Neuson is a genuine OEM Cylinder Head designed for a wide range of Wacker Neuson equipment including CT36 and CT30 walk-behind concrete trowels, WP and VP series single-direction vibratory plates, BPU reversible vibratory plates, PT2A centrifugal trash pumps, GP2500A and GV2500A portable generators, and several other models sharing the same engine platform. As a factory-sourced component, the is manufactured to the exact specifications required by Wacker Neuson for correct fit and function across this broad equipment family. This Cylinder Head is a direct OEM replacement, making it the go-to choice for service technicians and equipment owners who need to restore engine performance to original operating condition.
Key Features
- Genuine OEM Casting and Porting Geometry — Manufactured to Wacker Neuson's exact combustion chamber dimensions, ensuring correct compression ratio and combustion efficiency for the shared engine platform used across this equipment family.
- Drop-In Engine Replacement — Bolt pattern, valve seat positions, and coolant/oil passages align directly with the original head, allowing straightforward installation without machining or adaptation.
- Broad Cross-Family Fitment — Confirmed for CT36 and CT30 walk-behind trowels, WP/VP/BPU vibratory plate compactors, PT2A trash pumps, GP2500A and GV2500A generators, and additional models in the A5000 power unit and screed power section range.
- Restores Full Engine Output — A cracked, warped, or leaking cylinder head causes compression loss, overheating, and oil contamination; replacing with part 5000082002 restores proper compression sealing and keeps the engine running at rated power.
- Combustion Seal Integrity — Correct head sealing is critical for preventing exhaust gas ingestion into the oil system and coolant passages — using the correct OEM Cylinder Head eliminates the risk of mismatched sealing surfaces that can lead to premature gasket failure.
The cylinder head is the upper section of the engine block that seals the combustion chamber, houses the intake and exhaust valves, and contains the passages through which the air-fuel mixture enters and exhaust gases exit. It works in conjunction with the head gasket to maintain the compression needed for efficient combustion — without a properly sealed and structurally sound cylinder head, the engine cannot generate adequate power and will run rough, overheat, or fail entirely. When a cylinder head cracks, warps from overheating, or develops a leak at the gasket surface, operators will notice a loss of power, white or blue exhaust smoke, oil in the coolant, or the engine refusing to start — all signs that the head needs immediate inspection and replacement.
Part Details
| Part Number | 5000082002 |
|---|---|
| Old Part Number | 0082002 |
| Brand | Wacker Neuson |
| Part Type | Genuine OEM |
| Description | Cylinder Head |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| CT36-5A Trowel | CT36-5A | 5000009438, 5200016256 |
| CT36-5A | CT36-5A EU | 5000620829 |
| CT36-5A-C Trowel | CT36-5A-C | 5000620040 |
| GP2500A | GP2500A | 5000620128, 5200002844, 5000620009 |
| PT2A | PT2A | 5000009095, 5000009237, 5000009092, 5000006720, 5000006721 |
| PG3A | PG3A | 5000007659, 5000009055 |
| GV2500A | GV2500A | 5000009345, 5000009350, 5000009355, 5000009360, 5000620542, 5000620286 |
| 915mm/36in CE Walk-behind Trow el | CT36ADP | 5000007592, 5000007591 |
| 915mm/36in CE Walk-behind Trow el | CT36ADP-E | 5000008034, 5000007697 |
| 762mm/30in CE Walk-behind Trow el | CT30AGT-E | 5000007589, 5000008004 |
| 762mm/30in CE Walk-behind Trow el | CT30AGT | 5000008006, 5000008003 |
| Vibratory Plate, 15kN, 400mm/1 5.5in | WP1540AW | 5000008060, 5000009472, 5000009545 |
| WP1540A VIBROPLATE | WP1540A | 5000008061, 5000630017 |
| Vibratory Plate, 15 kN, 500mm/ 19.5in | WP1550AW | 5000007576, 5000009486 |
| WP1550A Single Direction Vibratory Plate | WP1550A | 5000007579, 5000630019 |
| 915mm/36in CE Walk-behind Trow el | CT36ADT-E | 5000007590, 5000008008, 5000008226 |
| 915mm/36in CE Walk-behind Trow el | CT36ADT | 5000008013, 5000008007, 5000008198, 5000008225, 5000009480 |
| VP1550AW VIBROPLATE | VP1550AW | 5000009028, 5000630055 |
| VP1340AW VIBROPLATE | VP1340AW | 5000009032, 5000630058 |
| VP1550A Single Direction Vibratory Plate | VP1550A | 5000009027, 5000630054 |
| VP2050A VIBROPLATE | VP2050A | 5000009087, 5000630062 |
| WPU1550A | WPU1550A | 5000630033 |
| WPU1550Aw | WPU1550Aw | 5000630034 |
| Vibratory Plate | VPA1740 | 5000006794, 5000008062 |
| Vibratory Plate 587mm/18in | VPG165A | 5000008038 |
| 50Hz Portable Generator | G2.1AE | 5000008250, 5000008244, 5000008246, 5000008248 |
| WPP 1550Aw | WPP1550Aw | 5000630030 |
| Vibratory Plate | VPA1750 | 5000006792 |
| Vibratory Plate 587mm/18in | VPG170A | 5000008039 |
| 50Hz Portable Generator | G2.1A | 5000008249, 5000008243, 5000008245, 5000008247 |
| Single Direction Plates | AP1550AW | 5000009540 |
| WPP 1540A | WPP1540A | 5000630025 |
| WPP 1550A | WPP1550A | 5000630029 |
| Portable Generator | G2.5A | 5000007188, 5000009256 |
| 50Hz Portable Generator | G5.7AE | 5000009017 |
| WP 2050A | WP2050A | 5000630022 |
| WPP 1540Aw | WPP1540Aw | 5000630026 |
| BPU2540A | BPU 2540A | 5000008758 |
| Single Direction Plates | AP1550A | 5000009539 |
| VP2050AW VIBROPLATE | VP2050AW | 5000009510 |
| Single Direction Plates | WP1550Aw | 5000630112 |
| Single Direction Plate | WP2050Aw | 5000630115 |
| Single Direction Plates | WP1540Aw-L | 5000630123 |
| Reversible Plates | WPU 1550A-L | 5000630124 |
| Single Direction Plates | WP1550Aw-L | 5000630126 |
| Vibratory Plate 500mm/19.5in | VPA1350W | 5000006793 |
| Floor Saws | BFS 614AB | 5000009527 |
| Single Direction Plates | WP1540Aw | 5000630106 |
| Vibratory Plate 400mm/15.5in | VPA1340 | 5000007154 |
| Gasoline Power Unit for Intern al Vibrator | A5000 | 5000009213 |
| BPU 2540A US | BPU 2540A US | 5000610360 |
| Single Drum Vibratory Roller | RS600A | 5000630010 |
| Single direction vibratory plate VP1340A | VP1340A | 5000630057 |
| Single Direction Plates | WP2050Aw-L | 5000630125 |
| Reversible Vibratory Plate, 24 kN, 40cm/16in | BPU 2440A | 5000007867, 5000007869 |
| Vibration Plate BPU 2450A | BPU 2450A | 5000007868 |
| Vibratory Truss Screed, Power Section | HP100 | 5000008291 |
| Vibratory Truss Screed, Power Section | HP50 | 5000008292 |
| Vibratory Truss Screed, Power Section | SP75 | 5000008295 |
| Vibratory Truss Screed, Power Section | SP50 | 5000008296 |
| Vibratory Truss Screed, Power Section | HP100A | 5000009506 |
| HP50A | HP50A | 5000009508 |
| A5000/160 ISO | A5000/160 ISO | 5000610325 |
| A5000/160 ANSI | A5000/160 ANSI | 5000610340 |
| Single direction vibratory plate WP1235A | WP1235A | 5000630016 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
