The Wacker Neuson Lever is a genuine OEM Lever designed for a wide range of Wacker Neuson equipment, including CT36 and CT30 walk-behind concrete trowels, PT2A centrifugal trash pumps, WP and VP single-direction vibratory plates, BPU reversible vibratory plates, and several additional machine families. Sourced directly from Wacker Neuson, part carries the same specification as the original component installed at the factory. This lever fits an extensive cross-section of Wacker Neuson models — from the CT36-5A and CT36ADT trowel series to the WP1550A, VP2050A, and BPU 2540A compaction machines — making it a practical stocking item for dealers and multi-machine fleets alike. Confirm your model number against the fitment list before ordering to ensure a correct match.
Key Features
- Genuine OEM Construction: — Manufactured to Wacker Neuson's original material and dimensional specification, so the lever delivers the same travel, engagement feel, and load capacity as the part it replaces.
- Direct Drop-In Installation: — Engineered to the original mounting geometry, so it installs using existing hardware and attachment points with no reworking of brackets or linkages.
- Broad Cross-Model Fitment: — A single part number covers CT36 and CT30 walk-behind trowels, PT2A trash pumps, WP/VP/BPU vibratory compaction plates, BFS floor saws, HP/SP truss screed power sections, and more — streamlining parts inventory across a mixed fleet.
- Consistent Control Response: — A lever in good condition transmits operator input cleanly and predictably; a worn, bent, or cracked lever introduces slop or resistance that affects throttle, clutch, or blade-pitch control depending on the host machine.
- Operator Safety Relevance: — On throttle and clutch control linkages, lever integrity is directly tied to the operator's ability to respond quickly; replacing a damaged lever restores positive, responsive control.
A lever is a mechanical linkage component that translates an operator's hand or thumb movement into a precise action elsewhere in the machine — such as opening the throttle, engaging a clutch, adjusting blade pitch on a trowel, or controlling flow on a pump. Because it is a high-touch, high-cycle component, levers are subject to wear, bending, and fatigue over time. When a lever becomes sloppy, sticks, or breaks, the operator loses direct, confident control of the machine function it governs, which can affect both output quality and safe machine operation. Replacing a worn lever promptly restores full mechanical response and keeps the machine performing as intended.
Part Details
| Part Number | 5000082011 |
|---|---|
| Old Part Number | 0082011 |
| Brand | Wacker Neuson |
| Part Type | Genuine OEM |
| Description | Lever |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| CT36-5A Trowel | CT36-5A | 5000009438, 5200016256 |
| CT36-5A | CT36-5A EU | 5000620829 |
| CT36-5A-C Trowel | CT36-5A-C | 5000620040 |
| PT2A | PT2A | 5000009095, 5000009237, 5000009092, 5000006720, 5000006721 |
| PG3A | PG3A | 5000007659, 5000009055 |
| 915mm/36in CE Walk-behind Trow el | CT36ADP | 5000007592, 5000007591 |
| 915mm/36in CE Walk-behind Trow el | CT36ADP-E | 5000008034, 5000007697 |
| 762mm/30in CE Walk-behind Trow el | CT30AGT-E | 5000007589, 5000008004 |
| 762mm/30in CE Walk-behind Trow el | CT30AGT | 5000008006, 5000008003 |
| Vibratory Plate, 15kN, 400mm/1 5.5in | WP1540AW | 5000008060, 5000009472, 5000009545 |
| WP1540A VIBROPLATE | WP1540A | 5000008061, 5000630017 |
| Vibratory Plate, 15 kN, 500mm/ 19.5in | WP1550AW | 5000007576, 5000009486 |
| WP1550A Single Direction Vibratory Plate | WP1550A | 5000007579, 5000630019 |
| 915mm/36in CE Walk-behind Trow el | CT36ADT-E | 5000007590, 5000008008, 5000008226 |
| 915mm/36in CE Walk-behind Trow el | CT36ADT | 5000008013, 5000008007, 5000008198, 5000008225, 5000009480 |
| VP1550AW VIBROPLATE | VP1550AW | 5000009028, 5000630055 |
| VP1340AW VIBROPLATE | VP1340AW | 5000009032, 5000630058 |
| VP1550A Single Direction Vibratory Plate | VP1550A | 5000009027, 5000630054 |
| VP2050A VIBROPLATE | VP2050A | 5000009087, 5000630062 |
| WPU1550A | WPU1550A | 5000630033 |
| WPU1550Aw | WPU1550Aw | 5000630034 |
| Vibratory Plate | VPA1740 | 5000006794, 5000008062 |
| Vibratory Plate 587mm/18in | VPG165A | 5000008038 |
| WPP 1550Aw | WPP1550Aw | 5000630030 |
| Vibratory Plate | VPA1750 | 5000006792 |
| Vibratory Plate 587mm/18in | VPG170A | 5000008039 |
| Single Direction Plates | AP1550AW | 5000009540 |
| WPP 1540A | WPP1540A | 5000630025 |
| WPP 1550A | WPP1550A | 5000630029 |
| WP 2050A | WP2050A | 5000630022 |
| WPP 1540Aw | WPP1540Aw | 5000630026 |
| BPU2540A | BPU 2540A | 5000008758 |
| Single Direction Plates | AP1550A | 5000009539 |
| VP2050AW VIBROPLATE | VP2050AW | 5000009510 |
| Single Direction Plates | WP1550Aw | 5000630112 |
| Single Direction Plate | WP2050Aw | 5000630115 |
| Single Direction Plates | WP1540Aw-L | 5000630123 |
| Reversible Plates | WPU 1550A-L | 5000630124 |
| Single Direction Plates | WP1550Aw-L | 5000630126 |
| Vibratory Plate 500mm/19.5in | VPA1350W | 5000006793 |
| Floor Saws | BFS 614AB | 5000009527 |
| Single Direction Plates | WP1540Aw | 5000630106 |
| Vibratory Plate 400mm/15.5in | VPA1340 | 5000007154 |
| Gasoline Power Unit for Intern al Vibrator | A5000 | 5000009213 |
| BPU 2540A US | BPU 2540A US | 5000610360 |
| Single Drum Vibratory Roller | RS600A | 5000630010 |
| Single direction vibratory plate VP1340A | VP1340A | 5000630057 |
| Single Direction Plates | WP2050Aw-L | 5000630125 |
| Reversible Vibratory Plate, 24 kN, 40cm/16in | BPU 2440A | 5000007867, 5000007869 |
| Vibration Plate BPU 2450A | BPU 2450A | 5000007868 |
| Vibratory Truss Screed, Power Section | HP100 | 5000008291 |
| Vibratory Truss Screed, Power Section | HP50 | 5000008292 |
| Vibratory Truss Screed, Power Section | SP75 | 5000008295 |
| Vibratory Truss Screed, Power Section | SP50 | 5000008296 |
| Vibratory Truss Screed, Power Section | HP100A | 5000009506 |
| HP50A | HP50A | 5000009508 |
| A5000/160 ISO | A5000/160 ISO | 5000610325 |
| A5000/160 ANSI | A5000/160 ANSI | 5000610340 |
| Single direction vibratory plate WP1235A | WP1235A | 5000630016 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
