The Wacker Neuson 5000089701 Clamp is a genuine OEM component designed for the BS-series gasoline vibratory rammer lineup, including BS50-2, BS60-2, BS70-2, BS500, BS600, BS650, BS700, and their respective "i" and "oi" variants. As a direct Wacker Neuson factory part, the 5000089701 is built to the same specification as the original, ensuring it seats and secures exactly as intended. This Clamp is confirmed to fit an extensive range of BS-series serial configurations, making it one of the most broadly compatible service parts in this rammer family. When your machine needs this component replaced, using the correct OEM part keeps the assembly performing as designed.
Key Features
- Genuine OEM Clamping Force: — Manufactured to Wacker Neuson's original torque and retention specification, so the clamp holds its mating components securely under the high-frequency vibration loads of rammer operation.
- Direct-Fit Replacement: — Matches the original mounting profile and hardware interface of the BS-series rammer, so installation follows the standard service procedure without modification.
- Broad BS-Series Compatibility: — Confirmed fitment across BS50-2, BS50-2i, BS60-2, BS60-2i, BS65-V, BS70-2, BS70-2i, BS500, BS600, BS650, BS700, BS500-oi, BS600-oi, and BS700-oi variants.
- Vibration-Environment Durability: — A clamp that loosens or fatigues in a rammer allows connected components to shift, causing accelerated wear or misalignment; the OEM specification ensures the part maintains its grip across extended service intervals.
- Accurate Part Number Traceability: — Part number 5000089701 is the factory-issued reference, making it straightforward to confirm correct fit against your machine's serial number and parts diagram before ordering.
A clamp in a vibratory rammer serves to secure and retain components — such as hoses, housings, or service lines — against the continuous high-frequency impulse forces the machine generates during compaction work. Because rammers operate under sustained vibration rather than the steady loads seen in most other equipment, any clamp that loses tension or fails to seat correctly can allow movement that damages surrounding components or creates a service hazard. Replacing a worn or damaged clamp with the correct OEM part restores proper retention and prevents secondary damage to the components it is meant to hold in place.
Part Details
| Part Number | 5000089701 |
|---|---|
| Old Part Number | 0089701 |
| Brand | Wacker Neuson |
| Part Type | Genuine OEM |
| Description | Clamp |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| BS50-2 | BS50-2 | 5100014171, 5100016644, 5100016645, 5100016646, 5100016647, 5200000641, 5200000652, 5200000653, 5200000654, 5200000655, 5200000656, 5200000677, 5200000685, 5200000686 |
| BS50-2i | BS50-2i | 5200000657, 5200000658, 5200000659, 5200000660, 5200000661, 5100014907, 5100016648, 5100016649, 5100016650, 5100028037, 5200000642, 5200000643, 5200000678, 5200000687, 5200011099, 5200025428, 5200025429 |
| BS 500 | BS 500 | 0008048, 0008204, 0009074 |
| BS500 | BS500 | 5000007550, 5000008049, 5000009075 |
| BS 500-oi | BS 500-oi | 0009343 |
| BS500-oi | BS500-oi | 5000009165 |
| BS 500S | BS 500S | 0009211 |
| BS60-2 | BS60-2 | 5100014847, 5200000663, 5200000666, 5200000681, 5200000688, 5200019205 |
| BS60-2i | BS60-2i | 5100014908, 5100028038, 5200000645, 5200000646, 5200000664, 5200000682, 5200000689, 5200000690 |
| BS 600 | BS 600 | 0008207, 0009077, 0009307 |
| BS600 | BS600 | 5000007551, 5000008205 |
| BS 600-oi | BS 600-oi | 0009262 |
| BS600-oi | BS600-oi | 5000009166 |
| BS 600S | BS 600S | 0009212 |
| BS65-V | BS65-V | 5100016651, 5200000669 |
| BS650 | BS650 | 5000008209 |
| BS70-2 | BS70-2 | 5100014905, 5100016652, 5200000670, 5200000671, 5200000684 |
| BS 70-2 | BS 70-2 | 5200000676 |
| BS70-2i | BS70-2i | 5200000672, 5100014909, 5100016653, 5200000649, 5200000650, 5200000673 |
| BS 700 | BS 700 | 0007552, 0008206, 0009308 |
| BS700 | BS700 | 5000008051, 5000008052, 5000009079 |
| BS700-oi | BS700-oi | 5000009167, 5000009328 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
