The Wacker Neuson is a genuine OEM Shaft Seal designed for the RT and RTL/RTK series remote-controlled vibratory trench rollers. This seal is a direct factory replacement sourced from Wacker Neuson, ensuring it meets the exact material and dimensional specifications of the original component. Verified fitment spans a wide range of trench roller configurations, including the RT56-SC, RT82-SC, RT82-SC2, RTx-SC2, RTLx-SC3, and RTKx-SC3 series. When it comes to drivetrain sealing on a machine that operates in demanding trench and cohesive soil environments, trusting a genuine OEM part like the is the straightforward choice.
Key Features
- Genuine OEM Sealing Integrity — Manufactured to Wacker Neuson's original material and compression specifications, delivering the same leak-free performance as the factory-installed seal.
- Direct-Fit Replacement — Matches the original shaft diameter and housing tolerances, so the seal seats correctly without modification to mating surfaces or bearing housings.
- Broad Trench Roller Compatibility — Fits RT56-SC, RT82-SC, RT82-SC2, RTx-SC2, RTLx-SC3, and RTKx-SC3 series machines, covering both standard and Compatec-equipped configurations.
- Protects Critical Drivetrain Components — A properly functioning shaft seal keeps lubricant in and contaminants out; a failed or weeping seal accelerates bearing and gear wear, leading to costly drivetrain damage.
- Rated for Harsh Trench Conditions — Built to withstand the vibration, soil moisture, and mud exposure typical of trench compaction work, where seal failure is accelerated by constant ground contact.
A shaft seal is a precision-formed ring that sits at the point where a rotating shaft exits a housing — such as a drum drive shaft or hydraulic motor output — and prevents lubricating oil or grease from leaking out while blocking dirt, water, and debris from entering. In a vibratory trench roller like the RT56-SC or RTLx-SC3, the drums are in constant contact with wet, compacted soil, which puts significant stress on every shaft seal in the machine. When a shaft seal wears, cracks, or loses its lip tension, lubricant loss follows, and the bearings and gears it was protecting begin to run dry. Replacing a worn shaft seal promptly with part number 5000089840 is one of the lowest-cost interventions available to prevent a much larger drivetrain repair.
Part Details
| Part Number | 5000089840 |
|---|---|
| Old Part Number | 0089840 |
| Brand | Wacker Neuson |
| Part Type | Genuine OEM |
| Description | Shaft Seal |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| Vibratory Trench Roller | RT82-SC2 | 5000620530, 5000620293, 5000620367, 5000620525, 5000620528, 5000620529, 5000620526, 5000620527 |
| Vibratory Trench Roller | RT82-SC2 EU | 5000620845, 5200003107 |
| Vibratory Trench Roller | RT56-SC2 | 5000620294, 5000620368 |
| Vibratory Trench Roller | RT56-SC2 EU | 5000620844 |
| Vibratory Trench Roller | RT82-SC | 5000009025, 5000620365, 5000620324, 5000620353, 5000620480, 5000620481, 5000620482 |
| Vibratory Trench Roller | RT56-SC | 5000009026, 5000620366 |
| RTLx-SC3 TRENCH ROLLER,GRN | RTLx-SC3 | 5200019251, 5200019250, 5200019254, 5200019252, 5100018515, 5100018516, 5200019253, 5100038346, 5100045091, 5100052332, 5100052269 |
| RTL82-SC3 ROLLER,SMOOTH DRUM | RTL82-SC3 | 5200019234, 5200019238, 5200019232, 5200019233, 5200019235, 5200019236, 5200019237, 5200019239, 5200022541 |
| RTKx-SC3 Trench Roller | RTK82-SC3 | 5200019257, 5200019256, 5200019255 |
| RTKx-SC3 TRENCH ROLLER,GRN | RTKx-SC3 | 5200019258, 5200019259, 5100018517, 5100018518, 5100034371, 5100037397, 5100039613, 5100052333, 5100052334, 5100052335, 5100052336, 5100052337 |
| Vibratory Trench Roller | RT560 | 5000009001, 5000007643, 5000007642 |
| Vibratory Trench Roller | RT820 | 5000009003, 5000007644, 5000007652 |
| Trench Roller | RTx-SC2 EU | 5100028378, 5200008540, 5100052330 |
| RTx-SC2 TRENCH ROLLER | RTx-SC2 | 5200008538, 5200008539, 5200018044, 5200018329 |
| Vibratory Trench Roller | RT820HT | 5000007645, 5000008047 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
