The Wacker Neuson is a genuine OEM Cheese Head Screw designed for the DPU and BPU series reversible vibratory plate compactors. This fastener is the exact factory-specified hardware used across a broad range of Wacker Neuson reversible plate compactors, including diesel-powered DPU models such as the DPU 2540H, DPU 3050H, DPU 3060H, and DPU 3750Hts, as well as gasoline-powered BPU models including the BPU 2540A, BPU 3050A, and BPU 3750Ats. Sourced directly from Wacker Neuson, part number carries the same material and dimensional standards as the hardware installed at the factory, ensuring a flush, secure fit without modification. Keep a spare on hand — correct fastener hardware is a low-cost line item that prevents costly assembly failures in the field.
Key Features
- Genuine OEM Fastener Spec — Manufactured to Wacker Neuson's exact thread pitch, head geometry, and material hardness spec for this screw position, eliminating the guesswork of sourcing a generic substitute.
- Drop-In Hardware Fit — The cheese head profile seats flush in its designated bore, matching the countersink depth and drive socket of the original assembly for clean, tool-compatible installation.
- Wide DPU & BPU Compatibility — A single part number covers an extensive range of Wacker Neuson reversible vibratory plate compactors across the DPU 24, 25, 29, 30, and 37 series as well as BPU 24, 29, 30, and 37 series models.
- Structural Integrity of the Compactor Assembly — A correctly torqued, specification-correct screw maintains clamping force through continuous vibration cycles; a worn, stripped, or incorrect fastener can allow critical components to loosen under load.
- Broad Model Coverage Including TS and US Variants — Fits standard, TS (trench shield) configuration, and US-market variants such as the DPU 3050H US, DPU 3750Hts US, BPU 2540A US, and BPU 3050A US.
A cheese head screw is a cylindrical-head fastener with a flat top and straight sides, designed to be driven with a slotted or socket tool and to sit flush or slightly proud within a machined counterbore. In reversible vibratory plate compactors, fasteners like this one hold together sub-assemblies — such as exciter housings, base plate brackets, or drive components — that are subjected to constant, high-frequency vibration during operation. Because vibratory compaction applies continuous cyclic stress to every bolted joint, using the correct grade and geometry of screw is critical; an undersized or lower-grade substitute can back out, shear, or allow component movement that leads to accelerated wear or assembly damage over time.
Part Details
| Part Number | 5000094073 |
|---|---|
| Old Part Number | 0094073 |
| Brand | Wacker Neuson |
| Part Type | Genuine OEM |
| Description | Cheese Head Screw |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| DPU2540H | DPU 2540H | 5000610035, 5000008755 |
| DPU 2550H | DPU 2550H | 5000610036, 5000008756 |
| DPU 2560H | DPU 2560H | 5000610037, 5000008757 |
| DPU 2560H-TS | DPU 2560H-TS | 5000610038, 5000610005 |
| BPU2540A | BPU 2540A | 5000008758 |
| BPU 3050A | BPU 3050A | 5000008763 |
| DPU 3050H | DPU 3050H | 5000610039, 5000008759 |
| DPU 3060H | DPU 3060H | 5000610040, 5000008760 |
| DPU 3070H | DPU 3070H | 5000610041, 5000008908 |
| DPU 3060H-TS | DPU 3060H-TS | 5000610042, 5000610006 |
| DPU 3050HE | DPU 3050HE | 5000610298 |
| DPU 3060HE-TS | DPU 3060HE-TS | 5000610302 |
| BPU 2540A US | BPU 2540A US | 5000610360 |
| BPU 3050A US | BPU 3050A US | 5000610361 |
| DPU 3050H US | DPU 3050H US | 5100000310 |
| DPU 3750Hts | DPU 3750Hts | 5000610321 |
| DPU 3750Hets | DPU 3750Hets | 5000610322 |
| DPU 3760Hts | DPU 3760Hts | 5000610358 |
| DPU 3760Hets | DPU 3760Hets | 5000610359 |
| BPU 3750Ats | BPU 3750Ats | 5000610408 |
| BPU3750Ats | BPU 3750Ats US | 5000610423 |
| DPU 3750Hts US | DPU 3750Hts US | 5100000311 |
| Gasoline Reversible Vibratory Plate | BPU 3050 | 5000008955 |
| Gas Reversible Vibratory Plate ,25 kN,40cm/16in | BPU 2540 | 5000008954 |
| Reversible Plates | MPU 29 | 5000630141, 5000630228 |
| Reversible Vibratory Plate, 24 kN, 40cm/16in | DPU 2440H | 5000007870 |
| Reversible Plates | MPU 29A | 5000630244 |
| vibratory Plate | BPU2540A CN | 5100046522 |
| Reversible Vibratory Plate, 24 kN, 30cm/12in | DPU 2430F | 5000006200 |
| Vibration Plate BPU 2950A WSM | BPU 2950A | 5000007873, 5000007962 |
| Reversible Vibratory Plate, 29 kN, 50cm/20in | DPU 2450F | 5000007876 |
| Vibration Plate DPU 2440F WGB | DPU 2440F | 5000007877, 5000007878, 5000007879, 5000007886 |
| Vibration plate DPU 2450H | DPU 2450H | 5000008746 |
| Vibration Plate | DPU 3050Hw US Army | 5100009915 |
| Reversible Vibratory Plate, 28 kN, 70cm/28in | DPU 2870 | 5000007289 |
| Reversible Vibratory Plate, 24 kN, 40cm/16in | BPU 2440A | 5000007867, 5000007869 |
| Vibration Plate BPU 2450A | BPU 2450A | 5000007868 |
| Reversible Vibratory Plate, 29 kN, 50cm/20in | DPU 2950Y | 5000007874 |
| Reversible Vibratory Plate, 29 kN, 70cm/28in | DPU 2970 | 5000007880 |
| Reversible Vibratory Plate, 29 kN, 50cm/20in | DPU 2950 | 5000007881, 5000007884 |
| Vibration Plate DPU 2960 | DPU 2960 | 5000007883 |
| Vibration Plate | BPU3050A CN | 5100039661 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
