The Wacker Neuson Socket is a genuine OEM component designed for the IRSE-FU, IRSEN, IRSEN-FU, and IREN series internal concrete vibrators. This socket serves as the electrical connection point between the vibrator head and its power source, and correct fitment is critical to safe, consistent operation on the pour. As a direct OEM replacement sourced through authorized Wacker Neuson supply channels, part number meets the original design specification for voltage, connector geometry, and contact durability. Confirmed fitment spans a wide range of models including the IRSEN45/042, IRSEN38/042, IREN58/042/10, IRSEN 45/250, IRSEN 38/250, IRSE-FU45/230, IRSE-FU 38/230, and the IRSEN-FU 45/230 Laser, among many others across the 38mm and 45mm vibrator families.
Key Features
- OEM-Spec Electrical Contact Rating — Manufactured to the original connector and contact specification, ensuring correct voltage transfer and a secure, weather-resistant fit at the power connection point.
- Drop-In Replacement for IRSE-FU, IRSEN, IRSEN-FU, and IREN Families — Replaces the original socket without modification, connecting directly to the existing cable and vibrator head interface.
- Broad Model Coverage — Compatible with 38mm and 45mm vibrator models across the IRSE-FU, IRSEN, IRSEN-FU, and IREN series, including 115V, 230V, 250V, and Laser-equipped variants.
- Sustained Vibration Output — A sound electrical connection at the socket maintains consistent power delivery to the vibrator head, preserving the frequency and amplitude needed for proper concrete consolidation.
- Electrical Safety Compliance — On powered concrete equipment, a damaged or corroded socket can create shock hazard or intermittent power loss mid-pour; replacing with a genuine OEM socket restores the original insulation and contact integrity.
The socket on a Wacker Neuson internal concrete vibrator is the electrical coupling that connects the power converter or control unit to the vibrator head assembly. It carries the operating voltage required to drive the vibrator motor and must maintain a secure, low-resistance connection under the vibration, moisture, and concrete slurry conditions typical on a pour site. When the socket corrodes, cracks, or develops a loose connection, the vibrator may cut out intermittently, deliver reduced amplitude, or fail to start entirely — any of which can leave voids in the slab and compromise the structural integrity of the pour.
Part Details
| Part Number | 5000095166 |
|---|---|
| Old Part Number | 0095166 |
| Brand | Wacker Neuson |
| Part Type | Genuine OEM |
| Description | Socket |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| IRSE-FU45/230 | IRSE-FU45/230 | 5000610256 |
| IRSEN45/115Laser | IRSEN45/115Laser | 5000008648 |
| IREN58/042/10 | IREN58/042/10 | 5000008506 |
| IRSEN45/042 | IRSEN45/042 | 5000008597 |
| IRSEN38/042 | IRSEN38/042 | 5000008598 |
| Int. Vib. w. Conv. IRSE-FU 38/230 | IRSE-FU 38/230 | 5000610249 |
| IRSE-FU45/230 Laser | IRSE-FU45/230 Laser | 5100019680 |
| Internal Vib. IRSEN 45/115 | IRSEN 45/115 | 5000008601 |
| Internal Vib. IRSEN 38/115 | IRSEN 38/115 | 5000008602 |
| Int. Vib. IRSEN 38/115 Laser | IRSEN 38/115 Laser | 5000008649 |
| Internal Vib. IRSEN 45/250 | IRSEN 45/250 | 5000008653 |
| Internal Vib. IRSEN 38/250 | IRSEN 38/250 | 5000008654 |
| Internal Vib. IRSEN 45/250 GV | IRSEN 45/250 GV | 5000008658 |
| Internal Vib. IRSEN 38/250 GV | IRSEN 38/250 GV | 5000008659 |
| Internal Vib. IRSEN 45 GV | IRSEN 45 GV | 5000008644 |
| Internal Vib. IRSEN 38 GV | IRSEN 38 GV | 5000008645 |
| Int. Vib. IRSEN-FU 45/230 | IRSEN-FU 45/230 | 5000008726 |
| Int.Vib. IRSEN-FU 38/230 | IRSEN-FU 38/230 | 5000008727 |
| Int.Vib. IRSEN-FU 45/230 Laser | IRSEN-FU 45/230 Laser | 5000008729 |
| Int.Vib. IRSEN-FU 38/230 Laser | IRSEN-FU 38/230 Laser | 5000008730 |
| Int. Vib. IRSEN-FU 38/115 WGB | IRSEN-FU 38/115 WGB | 5000008921 |
| Int. Vib. IRSEN-FU 45/115 WGB | IRSEN-FU 45/115 WGB | 5000008922 |
| Int. Vib. w. Conv. IRSE-FU 38/120 GB | IRSE-FU 38/120 GB | 5000610251 |
| IRSEFU 38 | IRSE-FU 38/120 US | 5000610252 |
| Int. Vib. w. Conv. IRSE-FU 45/120 GB | IRSE-FU 45/120 GB | 5000610258 |
| IRSEFU 45 | IRSE-FU 45/120 US | 5000610261 |
| IRSEN FU45,115/60HZ,1 METER | IRSEN-FU 45/115 WC | 5000610154 |
| IRSEN FU38,115/60HZ,1 METER | IRSEN-FU 38/115 WC | 5000610155 |
| Internal vib. IRSEN 65k/250 | IRSEN 65k/250 | 5000008650 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
