The Wacker Neuson Socket Port is a genuine OEM component designed for the IRSEN and IRSE-FU series internal concrete vibrators. This part serves as the electrical connection port on the vibrator unit, and as a direct factory replacement it maintains the correct fit and electrical interface that these high-frequency concrete vibrators depend on. Fitment covers a wide range of IRSEN 57, IRSEN 58, IRSEN 65k, and IRSE-FU models across 115V, 120V, 230V, and 250V configurations, including standard, GV, Laser, and WC variants. Using genuine Wacker Neuson part ensures the socket connection is restored to its original specification, keeping your vibrator operating as intended on the pour.
Key Features
- Genuine OEM Electrical Integrity — Sourced directly from Wacker Neuson, this socket port meets the original electrical contact and housing specification required for high-frequency internal vibrator operation.
- Direct-Fit Replacement — Engineered to install in the same position as the original, with matching connector geometry for a straightforward swap on compatible IRSEN and IRSE-FU units.
- Broad Series Compatibility — Fits IRSEN 57, IRSEN 57k, IRSEN 58, IRSEN 65k, and IRSE-FU models across multiple voltage configurations including 115V, 120V, 230V, and 250V variants.
- Restores Consistent Power Delivery — A damaged or worn socket port can interrupt power to the vibrator head, causing inconsistent vibration frequency and poor concrete consolidation; replacing it restores dependable operation.
- Electrical Safety Compliance — As a live-circuit connection point on a tool used in wet concrete environments, using a genuine OEM socket port ensures the connection meets the original insulation and contact rating for safe operation.
The socket port on a Wacker Neuson internal concrete vibrator is the electrical interface point that connects the power supply or converter unit to the vibrator head assembly. It carries the high-frequency electrical signal that drives the eccentric motor inside the vibrator needle, producing the vibration needed to consolidate fresh concrete and eliminate air voids. When the socket port becomes damaged, corroded, or cracked, the electrical connection becomes unreliable — leading to intermittent vibration, loss of frequency consistency, or a complete failure to operate, all of which can compromise concrete pour quality.
Part Details
| Part Number | 5000095167 |
|---|---|
| Old Part Number | 0095167 |
| Brand | Wacker Neuson |
| Part Type | Genuine OEM |
| Description | Socket Port |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| IRSE-FU58/230 | IRSE-FU58/230 | 5000610267 |
| IRSEN58/042 | IRSEN58/042 | 5000007901 |
| IRSEN58/042GV | IRSEN58/042GV | 5000008642 |
| Internal Vib. IRSEN 57/115 | IRSEN 57/115 | 5000008599 |
| Internal Vib. IRSEN 57k/115 | IRSEN 57k/115 | 5000008600 |
| Int. Vib. IRSEN 57/115 Laser | IRSEN 57/115 Laser | 5000008646 |
| Int. Vib. IRSEN 57k/115 Laser | IRSEN 57k/115 Laser | 5000008647 |
| Internal Vib. IRSEN 57/250 | IRSEN 57/250 | 5000008651 |
| Internal Vib. IRSEN 57k/250 | IRSEN 57k/250 | 5000008652 |
| Internal Vib. IRSEN 57/250 GV | IRSEN 57/250 GV | 5000008656 |
| Internal Vib. IRSEN 57k/250 GV | IRSEN 57k/250 GV | 5000008657 |
| Int. Vib. w. Conv. IRSE-FU 38/230 Laser | IRSE-FU 38/230 Laser | 5000610250 |
| IRSE-FU 45/230/03 | IRSE-FU45/230 Laser | 5000610257 |
| IRSE-FU 57/230/03 | IRSE-FU 57/230 Laser | 5000610268 |
| IRSE-FU58/230Laser | IRSE-FU58/230Laser | 5100019681 |
| 57 mm Internal Vibrator, short | IRSEN 57k | 5000008596 |
| Internal Vib. IRSEN 57k GV | IRSEN 57k GV | 5000008643 |
| Int.Vib. IRSEN-FU 57/230 | IRSEN-FU 57/230 | 5000008725 |
| Int.Vib. IRSEN-FU 57/230 Laser | IRSEN-FU 57/230 Laser | 5000008728 |
| IRSEN-FU 115V 60HZ 57 | IRSEN-FU 57/115 | 5000008923 |
| Int. Vib. w. Conv. IRSE-FU 57/120 GB | IRSE-FU 57/120 GB | 5000610271 |
| IRSEFU 57 | IRSE-FU 57/120 US | 5000610275 |
| IRSEFU 30 | IRSE-FU 30/120 US | 5000610283 |
| IRSEN58/250GV | IRSEN58/250GV | 5100010373 |
| IRSEN FU57,115/60HZ,1 METER | IRSEN-FU 57/115 WC | 5000610153 |
| Internal vib. IRSEN 65k GV | IRSEN 65k GV | 5000008641 |
| Internal vib. IRSEN 65k/250 GV | IRSEN 65k/250 GV | 5000008655 |
| Internal vib. IRSEN 65k | IRSEN 65k | 5000008678 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
