The Wacker Neuson Crank Gear is a genuine OEM component designed for the EHB 10 and EHB 11 series electric demolition hammers, including EHB 10/230, EHB 10/110, EHB 10/240, EHB 10/100, EHB 11/110, and voltage-specific export variants. As a direct Wacker Neuson OEM part, the is manufactured to the same specification as the original, ensuring correct mesh geometry and dimensional tolerances within the hammer's drive mechanism. This part covers an extensive range of EHB 10 and EHB 11 configurations across 110V, 115V, 127V, 200V, 230V, 240V, and 250V supply variants. Verify your machine's model number and serial number before ordering to confirm fitment.
Key Features
- OEM Gear Tooth Accuracy — Manufactured to Wacker Neuson's original tooth profile specification, maintaining correct meshing with the crankshaft drive and preventing premature wear on mating components.
- Drop-In Installation — Dimensionally identical to the original crank gear, allowing direct installation into the EHB 10 and EHB 11 drive housings without modification to the gear pocket or shaft interface.
- Broad EHB Series Coverage — Fits a wide range of EHB 10 and EHB 11 electric hammer configurations, including 110V, 115V, 127V, 200V, 230V, 240V, and 250V supply variants across multiple regional and OEM builds.
- Sustained Impact Output — A correctly functioning crank gear converts motor rotation into consistent reciprocating piston motion; a worn or chipped gear causes erratic blow energy, increased vibration, and eventual drive failure.
- Genuine Wacker Neuson OEM Part — Sourced directly from Wacker Neuson, part number 5000095819 carries the same quality assurance as the component fitted at the factory.
The crank gear is a core element of the electric hammer's reciprocating drive train. It transfers rotational power from the motor through a gear mesh to drive the crankshaft, which in turn converts that rotation into the rapid back-and-forth piston movement that delivers impact force to the chisel or drill bit. Because it operates under continuous load and high cycle rates, the crank gear is subject to tooth wear and fatigue over time. When the gear degrades, blow energy drops, the mechanism runs rough, and unchecked wear can propagate damage to adjacent drive components — making timely replacement essential to keeping the hammer performing at full capacity.
Part Details
| Part Number | 5000095819 |
|---|---|
| Old Part Number | 0095819 |
| Brand | Wacker Neuson |
| Part Type | Genuine OEM |
| Description | Crank Gear |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| Electric Drilling/Chisseling H ammer, 19x82.5, 230V | EHB 10/230 | 5000006943, 5000007081, 5000007082, 5000007083, 5000007087, 5000007494 |
| Electric Hammer EHB 10/240 | EHB 10/240 | 5000007084, 5000007085 |
| Electric Drilling/Chisseling H ammer, Spline, 115V | EHB 11/110 | 5000007096 |
| Electric Hammer EHB 10/110 | EHB 10/110 | 5000007202, 5000007203, 5000007204 |
| Electric Hammer EHB 10/100 | EHB 10/100 | 5000007205 |
| El. Hammer EHB 10/042/200 | EHB 10/042/200 | 5000007222 |
| El. Hammer EHB 10/115/200 | EHB 10/115/200 | 5000007255 |
| El. Hammer EHB 10/250/200 | EHB 10/250/200 | 5000007264 |
| El. Hammer EHB 10/127 WMM | EHB 10/127 | 5000007351 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
