The Wacker Neuson Shockmount is a genuine OEM component designed for a broad range of Wacker Neuson compaction equipment, including DS70 and DS720 diesel rammers, BS series gasoline rammers, VP and WP series single-direction vibratory plates, DPU reversible vibratory plates, AP battery-powered vibratory plates, and DPS series asphalt plates. As a direct OEM replacement, the is manufactured to the same specification as the original part, ensuring a correct installation without guesswork. This wide fitment range makes it a practical stock item for contractors and rental fleets running multiple Wacker Neuson machines on the same site.
Key Features
- Genuine OEM Vibration Isolation: — Manufactured to Wacker Neuson's original specification, delivering the correct damping rate for this part's role in isolating the operator handle or upper assembly from compaction forces.
- Direct-Fit Replacement: — Matches the original mounting geometry and hardware interface on DS70, DS720, BS500, BS600, BS700, VP, WP, AP, and DPS series machines for a straightforward swap.
- Broad Compaction Equipment Compatibility: — A single part number covering diesel rammers, gasoline rammers, battery-powered plates, single-direction vibratory plates, and reversible DPU plates makes this an efficient inventory choice.
- Protects Operator Comfort and Control: — A correctly functioning shockmount absorbs high-frequency vibration at the source; a worn or cracked mount transfers that vibration directly to the handles, reducing operator control and increasing fatigue.
- Operator Safety Relevance: — Degraded shockmounts can cause excessive hand-arm vibration (HAV) exposure. Replacing a failed mount on schedule helps keep vibration levels within safe operational limits for equipment operators.
A shockmount is a rubber-bonded isolator that sits between the high-vibration lower assembly of a compactor or rammer and the upper frame or handlebar structure. Its job is to absorb and dampen the rapid compaction impulses generated by the engine and exciter, preventing that energy from transmitting into the operator's hands and arms. Over time, the rubber element hardens, cracks, or separates from its bonded metal inserts due to heat cycling and constant mechanical stress — when that happens, vibration transfer increases sharply, operator fatigue sets in faster, and structural components above the mount begin to experience wear they were never intended to absorb. Replacing a worn shockmount promptly restores the machine's intended vibration isolation performance and keeps operators working safely and comfortably.
Part Details
| Part Number | 5000105056 |
|---|---|
| Old Part Number | 0105056 |
| Brand | Wacker Neuson |
| Part Type | Genuine OEM |
| Description | Shockmount |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| DS70 Vibratory Rammer, 11" Plastic Shoe EPA | DS70 | 5000620049, 5000620050, 5000620052, 5000620053, 5000620054, 5000620911, 5000009342, 5000009402, 5000009403 |
| Diesel Vibratory Rammer, 330mm /13in Shoe | DS720 | 5000008203, 5000008200, 5000009059, 5000009060, 5000009309 |
| Value Vibratory Plate, 11kN, 3 50mm/13.8in | VP1135R | 5000008709, 5000009071, 5000630061 |
| VP1135AW VIBROPLATE | VP1135AW | 5000009058, 5000630060 |
| Value Vibratory Plate, 11 kN, 356mm/14in | VP1135RW | 5000009251, 5000009512 |
| Vibratory Plate, 15kN, 400mm/1 5.5in | WP1540AW | 5000008060, 5000009472 |
| WP1540A VIBROPLATE | WP1540A | 5000008061 |
| Value Vibratory Plate, 13 kN, 400mm/15.5in | VP1340RW | 5000009034 |
| VP1135A VIBROPLATE | VP1135A | 5000009057, 5000630059 |
| VP1550AW VIBROPLATE | VP1550AW | 5000009028, 5000630055 |
| Value Vibratory Plate, 15 kN, 500mm/19.5in | VP1550RW | 5000009030 |
| VP1340AW VIBROPLATE | VP1340AW | 5000009032, 5000630058 |
| Value Vibratory Plate, 13 kN, 400mm/15.5in | VP1340R | 5000009033 |
| VP1340W VIBROPLATE | VP1340W | 5000008706, 5000630051 |
| VP1550A Single Direction Vibratory Plate | VP1550A | 5000009027, 5000630054 |
| Value Vibratory Plate, 15 kN, 500mm/19.5in | VP1550R | 5000009029, 5000630056 |
| VP1340A VIBROPLATE | VP1340A | 5000009031, 5000630057 |
| VP2050A VIBROPLATE | VP2050A | 5000009087, 5000630062 |
| Value Vibratory Plate, 20 kN, 500mm/19.5in | VP2050R | 5000009088, 5000630063 |
| MP15 | MP15 | 5000630131, 5000630227 |
| VP1030R-VIBROPLATE | VP1030R | 5000008702, 5000009504 |
| VP1550W VIBROPLATE | VP1550W | 5000008708, 5000630013, 5000630053 |
| Vibratory Soil Plate, 60 kN | VP60X | 5000009533 |
| Vibratory Soil Plate, 50 kN | VP50H | 5000009542 |
| Vibratory Soil Plate, 60 kN | VP60H | 5000009543 |
| Value Vibratory Plate, 10 kN, 300mm/12in | VP1030A | 5000008701, 5000630047 |
| VP1340 Single Direction Vibratory Plate | VP1340 | 5000008705, 5000630050 |
| Vibratory Soil Plate, 50 kN | VP50X | 5000009531 |
| VP1550 VIBROPLATE | VP1550 | 5000008707, 5000630052 |
| Value Vibratory Plate, 11kN, 3 50mm/13.8in | VP1135(RAW) | 5000008710 |
| VP1030Aw | VP1030AW | 5000009514, 5000630423 |
| Single Direction Plates | AP1550R | 5000009538 |
| VP50Hw-VIBROPLATE | VP50Hw | 5000630096 |
| VP60Hw-VIBROPLATE | VP60Hw | 5000630097 |
| Vibratory Rammer, 254mm/10in S hoe | BS500 | 5000008204 |
| Vibratory Rammer, 280mm/11in S hoe | BS600 | 5000008205 |
| Value Vibratory Plate, 15kN, 5 00mm/19.5in | VP1550(RAW) | 5000008703, 5000630048 |
| Value Vibratory Plate, 15kN, 5 00mm/19.5in | VP2050(RAW) | 5000008704, 5000630049 |
| Vibratory Soil Plate, 40 kN | VP40H | 5000009535 |
| Value Vibratory Plate | VP2050I | 5000009541 |
| VP50Xw-VIBROPLATE | VP50Xw | 5000630094 |
| VP60Xw-VIBROPLATE | VP60Xw | 5000630095 |
| Vibratory Rammer, 280mm/11in S hoe | BS700 | 5000008206 |
| Single Direction Plates | AP1135A | 5000009519 |
| Single Direction Plates | AP1550AW | 5000009540 |
| Value Vibratory Plate, 20 kN, 500mm/19.5in | VP2050Y | 5000009089, 5000009515, 5000009090 |
| Single Direction Plate | AP1135R | 5000009518 |
| DPS1850H Asphalt | DPS1850H Asphalt | 5000610033, 5000008925 |
| Single Direction Plate | MP15(RAW) | 5000630245 |
| Single Direction Asphalt Plate | VP2050RW | 5000009511 |
| VP2050W VIBROPLATE | VP2050W | 5000009537 |
| Single Direction Plates | AP1550A | 5000009539 |
| DPS1850H Basic | DPS1850H Basic | 5000610032, 5000008924 |
| DPS1850H Vario | DPS1850H Vario | 5000610034, 5000008926 |
| DPU 130Le | DPU 130Le | 5000610143 |
| Soil and Asphalt Compaction | MP15A | 5000630318 |
| VP2050AW VIBROPLATE | VP2050AW | 5000009510 |
| 500mm/50in, 20kN Value Vibrato ry Plate | VP2050 | 5000009530 |
| DPU130Le | DPU130Le CH/US | 5000610424 |
| Value Vibratory Plate, 11kN 356mm/14in | VP1135R-AU | 5000630102 |
| DPU 3750Hts | DPU 3750Hts | 5000610321 |
| DPU 3750Hets | DPU 3750Hets | 5000610322 |
| DPU 3760Hts | DPU 3760Hts | 5000610358 |
| DPU 3760Hets | DPU 3760Hets | 5000610359 |
| Single Direction Plates | VP1340W-L | 5000630001 |
| Single Direction Plates | VP1340W-LL | 5000630002 |
| Single Direction Plates | VP1340W-LF | 5000630003 |
| VP1340W VIBROPLATE, W/WHEEL KIT | VP1340W w/WH | 5000630121 |
| VP1550AW/WH | VP1550AW/WH | 5000630373 |
| WP1540W VIBROPLATE | WP1540W | 5000009326 |
| WP1540 VIBROPLATE | WP1540 | 5000009327 |
| Single Direction Plates | MP15-CE | 5000630338 |
| VP1340AW/WH | VP1340AW/WH | 5000630374 |
| Single Direction Vibratory Pla te, 18kN, 50cm/20in | DPS 1850H | 5000008397, 5000008750 |
| AP1850we | AP1850we | 5100038311 |
| AP1850e | AP1850e | 5100038319 |
| AP1840we | AP1840we | 5100042938 |
| AP1840e | AP1840e | 5100042939 |
| DPS3060Hv | DPS3060Hv | 5100016643 |
| BS50-2i | BS50-2i | 5100028037 |
| 280/11in Shoe, Vibratory Ramme r | BS60-2i | 5100028038 |
| DS70Y 13" | DS70Y 13in | 5100030612 |
| AP2560e | AP2560e | 5100048488 |
| Seat cpl. | Seat cpl. | 5100057574 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
