The Wacker Neuson Back Handle is a genuine OEM component designed for the EH 9 and EHB 11 series electric breakers and demolition hammers. As a direct OEM replacement, this back handle is sourced from Wacker Neuson and manufactured to the same specifications as the original part fitted at the factory. It is confirmed to fit a wide range of EH 9 and EHB 11 variants across both 115V and 230V configurations, including BL, BLM, BLS, and WMI models. When the original back handle cracks, breaks, or becomes unsafe to grip, replacing it with part number restores full operator control and proper tool handling.
Key Features
- Genuine OEM Construction: — Molded and finished to Wacker Neuson's original grip geometry, ensuring the correct ergonomic profile and structural integrity for a demolition-rated handle.
- Direct Bolt-On Replacement: — Engineered to align with the existing mounting points on EH 9 and EHB 11 breaker frames, allowing straightforward installation without modification.
- Broad Series Compatibility: — Fits EH 9 BL, EH 9 BLM, EHB 11 BL, EHB 11 BLM, and EHB 11 BLS models in both 115V and 230V variants, covering a wide range of Wacker Neuson electric demolition hammer configurations.
- Sustained Operator Control: — A structurally sound back handle allows the operator to maintain a firm, two-handed grip during sustained chiseling and drilling, directly affecting accuracy and fatigue.
- Operator Safety Compliance: — The back handle is a primary contact point between operator and tool under high-vibration demolition loads; replacing a damaged handle with a genuine OEM part maintains the safe handling characteristics the tool was designed around.
The back handle on an electric demolition hammer or breaker is one of two primary grip points the operator uses to guide and control the tool during chiseling, drilling, and breaking work. It absorbs a significant share of the tool's vibration and impact recoil, and it provides the leverage needed to steer the bit accurately through concrete, masonry, and similar materials. When the back handle cracks, chips, or loses its mounting integrity, the operator loses control and grip stability — increasing both fatigue and the risk of injury. Replacing a worn or broken handle promptly with the correct OEM part keeps the breaker operating as intended and maintains the handling characteristics it was engineered to deliver.
Part Details
| Part Number | 5000106215 |
|---|---|
| Old Part Number | 0106215 |
| Brand | Wacker Neuson |
| Part Type | Genuine OEM |
| Description | Back Handle |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| E.Breaker EHB 11 BL/115 WGB | EHB 11 BL/115 | 5000008741, 5000008733 |
| E.Breaker EHB 11 BLM/115SUL | EHB 11 BLM/115 | 5000008744, 5000008745 |
| Electric Breaker EHB 11 BL/230 | EHB 11 BL/230 | 5000008395, 5000008740, 5000610233 |
| Electric Drilling/Chisseling H ammer, SDS-max, 115V | EHB 11 BLM/230 | 5000008731, 5000008743, 5000610234 |
| E.Breaker EH 9 BL/115 SUL | EH 9 BL/115 | 5000008736, 5000008734 |
| E.Breaker EH 9 BLM/115 SUL | EH 9 BLM/115 | 5000008738, 5000008739 |
| Electric Drilling/Chisseling H ammer, Spline, 115V | EHB 11 BLS/115 | 5000008742 |
| electric hammer EHB 11 BL 230 | EHB 11 BL/230 Loxam | 5000008754 |
| Electric Breaker w/19x82.5 sha nk, 230V | EH 9 BL/230 | 5000008429, 5000008735, 5000610231 |
| Electric Breaker w/28x152 shan k, 110V | EH 9 BLM/230 | 5000008732, 5000008737, 5000610232 |
| Hammer EH 9 BL/230 Loxam | EH 9 BL/230 Loxam | 5000008753 |
| E.Breaker EH 9 BL/230 SIB | EH 9 BL/230 WMI | 5000008917 |
| electric hammer EH9 BLM/230 | EH 9 BLM/230 WMI | 5000008918 |
| E.Breaker EHB 11 BL/230 SIB | EHB 11 BL/230 WMI | 5000008919 |
| E.Breaker EHB 11 BLM/230 SIB | EHB 11 BLM/230 WMI | 5000008920 |
| E.Breaker EHB 11 BLM/230Loxam | EHB 11 BLM/230 Loxam | 5000008997 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
