The Wacker Neuson Hood O-Ring is a genuine OEM seal designed for the AR 75 series external concrete vibrators, covering a wide range of voltage and frequency configurations across the AR 75 family. As a direct OEM replacement, part is manufactured to the original specification, ensuring a proper fit within the vibrator housing without modification. This seal is also confirmed to fit the AP2560e battery-powered vibratory plate, making it a versatile service part across multiple Wacker Neuson product lines. Keep a spare on hand to minimize interruption during scheduled maintenance or unplanned servicing.
Key Features
- Genuine OEM Sealing Integrity — Manufactured to the original elastomer specification for the AR 75 hood assembly, ensuring consistent compression and leak-free performance at the housing joint.
- Direct-Fit Replacement — Engineered to seat correctly in the existing hood groove without trimming, stretching, or adapter hardware.
- Broad AR 75 Series Coverage — Confirmed fitment across AR 75 external vibrator variants spanning 42V, 55V, 115V, 230V, 240V, 250V, 275V, 318V, 400V, 440V, 460V, and 500V configurations, as well as the AP2560e vibratory plate.
- Protects Internal Components — A correctly seated hood O-ring keeps moisture, concrete slurry, and debris out of the vibrator housing — a worn or missing seal can allow contamination that accelerates internal wear and causes premature motor failure.
- Electrical Safety Compliance — On electric external vibrators, a compromised housing seal can allow moisture ingress near live electrical components; replacing a worn O-ring with a genuine part maintains the integrity of the sealed enclosure.
The hood O-ring on an AR 75 external concrete vibrator forms the primary seal between the vibrator's end cap or hood and its main housing body. This seal keeps water, cement paste, and fine aggregate from entering the motor compartment during concrete consolidation work — environments that are inherently wet and abrasive. When the O-ring hardens, cracks, or is displaced, the protective barrier is broken, allowing contaminants to reach internal windings and bearings. Replacing a worn hood O-ring during routine service is one of the most cost-effective steps in extending the working life of an external vibrator unit.
Part Details
| Part Number | 5000106415 |
|---|---|
| Old Part Number | 0106415 |
| Brand | Wacker Neuson |
| Part Type | Genuine OEM |
| Description | Hood O-Ring |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| AR 75/9/042 | AR 75/9/042 | 5000007793 |
| External Vibrator, 10800 rpm, 42V | AR 75/10,8/046 | 5000007904 |
| External Vib. AR 75/3/230/400 | AR 75/3/230/400 | 5000007898 |
| AR 75/6/042 | AR 75/6/042 | 5000007794 |
| External Vib. AR 75/4,5/042 | AR 75/4,5/042 | 5000007795 |
| AR 75/9/250 | AR 75/9/250 | 5000007796 |
| AR 75/6/250 | AR 75/6/250 | 5000007797 |
| External Vib. AR 75/4,5/250 | AR 75/4,5/250 | 5000007798 |
| AR 75/3/230 v | AR 75/3/230 v | 5000007865 |
| External Vib. AR 75/6/055 | AR 75/6/055 | 5000007866 |
| External Vibrator, 3600 rpm, 4 60V | AR 75/3,6/460 US | 5000007889 |
| External Vib. AR 75/3/200/400 | AR 75/3/200/400 | 5000007900 |
| Ext. Vib. AR 75/3,6/318/550 | AR 75/3,6/318/550 | 5000007943 |
| External Vib. AR 75/6/115 | AR 75/6/115 | 5000008431 |
| External Vib. AR 75/3/400KK | AR 75/3/400 | 5000008607, 5000007799 |
| AR 75/1,5/400 | AR 75/1,5/400 | 5000007800 |
| Ext. Vib. AR 75/3,6/230/400 | AR 75/3,6/230/400 | 5000007899 |
| External Vibrator, 3600 rpm, 4 40V | AR 75/3,6/220/440 | 5000007951 |
| External Vib. AR 75/1,5/500 | AR 75/1,5/500 | 5000008589 |
| External vibrator AR 75/3/240 | AR 75/3/240/415 | 5000007897 |
| External vibrator AR 75/1,8 | AR 75/1,8/440 | 5000007902 |
| External vibrator AR 75/3,6 | AR 75/3,6/440 | 5000007903 |
| External Vib. AR 75/7,2/275 | AR 75/7,2/275 | 5000007952 |
| AP2560e | AP2560e | 5100048488 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
