The Wacker Neuson Belt is a genuine OEM component designed for the BTS 930, BTS 935, BTS 1030, and BTS 1035 series gasoline cut-off saws, including L3 variants. Sourced directly from Wacker Neuson, this belt is manufactured to the exact dimensions and material specifications required for proper power transfer in these machines. It fits both standard and L3 configurations across the BTS line, covering models with 20mm and 1-inch arbor setups. If your BTS cut-off saw is showing signs of blade slippage, reduced cutting power, or excessive vibration, replacing the drive belt with part number is a straightforward first step.
Key Features
- OEM-Matched Drive Dimensions — Cut to the exact length, width, and profile specified by Wacker Neuson, ensuring correct tension and engagement with the drive and blade pulleys right out of the box.
- Broad BTS Series Coverage — Fits BTS 930, BTS 930 L3, BTS 935, BTS 935 L3, BTS 1030, BTS 1030 L3, BTS 1035, and BTS 1035 L3 cut-off saws, including both 20mm and 1-inch arbor configurations.
- Consistent Blade Speed Under Load — A properly tensioned OEM belt maintains steady power delivery from the engine to the blade, so the saw cuts cleanly through concrete, asphalt, and masonry without bogging down.
- Genuine Wacker Neuson OEM Part — Part number 5000108135 is a factory-supplied component, not an approximation — material compound and cross-section are matched to the original specification for this belt-driven saw family.
- Blade Control and Operator Safety — A worn or cracked belt can cause unpredictable blade engagement on a cut-off saw. Replacing it on schedule keeps blade behavior predictable and the machine in safe operating condition.
The drive belt on a BTS cut-off saw transfers engine power to the cutting blade by connecting the engine's drive pulley to the blade arbor pulley. When the belt is in good condition, it maintains consistent blade speed and absorbs minor shock loads during cutting. As the belt stretches, cracks, or frays with use, it begins to slip under load — causing loss of cutting power, increased heat, and erratic blade behavior. Replacing a worn belt with the correct OEM part restores full power transfer and keeps the saw performing the way it was built to.
Part Details
| Part Number | 5000108135 |
|---|---|
| Old Part Number | 0108135 |
| Brand | Wacker Neuson |
| Part Type | Genuine OEM |
| Description | Belt |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| Power Cutter BTS 1035 L3 | BTS 1035 L3 | 5000008912, 5000008990, 5000610076, 5000610182 |
| Cut-Off Saws | BTS 1030 L3 | 5000008989, 5000610075 |
| Cut-Off Saws | BTS 930 L3 | 5000008987, 5000610073 |
| Cut-Off Saws | BTS 935 L3 | 5000008988, 5000610074 |
| Cut-off Saw with 20mm Arbor | BTS 930 | 5000008340 |
| Cut-off Saw with 1in Arbor | BTS 935 | 5000008341 |
| Cut-off Saw with 1in Arbor | BTS 1035 | 5000007975 |
| Cut-off Saw with 20mm Arbor | BTS 1030 | 5000008339 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
