The Wacker Neuson Upper Tube is a genuine OEM component designed for the IREN 57, IREN58, IRSEN, IRFU, IRSEN-FU, and IRFUN series internal concrete vibrators. Sourced directly from Wacker Neuson, this Upper Tube meets the same manufacturing standards as the original part installed at the factory. It is compatible across a broad range of 57 mm and 58 mm internal vibrator models, including both standard and GV (rubber tip) variants, making it a dependable choice whether you are servicing a single unit or maintaining a fleet of vibrators on an active pour site.
Key Features
- Genuine OEM Construction — Manufactured to the exact dimensional tolerances required for proper vibrator head alignment and hose coupling integrity in the IREN, IRSEN, IRFU, and IRFUN families.
- Direct-Fit Replacement — Engineered to seat and connect the same way as the original upper tube, matching thread pitch, outer diameter, and coupling geometry without rework.
- Broad Series Compatibility — Fits an extensive range of 57 mm and 58 mm Wacker Neuson internal vibrator models, including IREN 57, IREN58, IRSEN 57, IRFUN 57, IRFU 57/58, and IRSEN-FU variants across multiple voltage and hose-length configurations.
- Structural Integrity Where It Counts — The upper tube is the primary mechanical link between the drive hose and the vibrator head; a cracked or worn tube causes loss of vibration transfer and can allow moisture ingress, accelerating damage to internal components.
- Backed by Wacker Neuson Part Number 5000108222 — Ordering by OEM part number eliminates guesswork and confirms you are receiving the correct tube for your specific vibrator configuration.
The upper tube on an internal concrete vibrator serves as the structural conduit connecting the flexible drive hose to the vibrator head. It channels the rotational energy from the motor through to the eccentric weight inside the head, which generates the high-frequency vibration needed to consolidate fresh concrete and eliminate air pockets. When the upper tube becomes cracked, corroded, or mechanically damaged, vibration efficiency drops noticeably, and the vibrator head may run erratically or fail to spin altogether — leading to poorly consolidated pours and potential structural defects in the finished concrete.
Part Details
| Part Number | 5000108222 |
|---|---|
| Old Part Number | 0108222 |
| Brand | Wacker Neuson |
| Part Type | Genuine OEM |
| Description | Upper Tube |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| IREN58/042/5 | IREN58/042/5 | 5000007820 |
| IREN58/042/5GV | IREN58/042/5GV | 5000008435 |
| IREN58/042/10 | IREN58/042/10 | 5000008506 |
| IRSEN58/042 | IRSEN58/042 | 5000007901 |
| Internal Vib. IREN 57 -6m | IREN 57 6m | 5000008504 |
| IRSEN58/042GV | IRSEN58/042GV | 5000008642 |
| Internal Vib. IREN 57/6mGV | IREN 57 6m GV | 5000008662 |
| Internal Vib. IREN 57 -8m | IREN 57 8m | 5000008505 |
| Internal Vib. IREN 57/048/240 | IREN 57/048/240 | 5000008591 |
| Internal Vib. IREN 57/8mGV | IREN 57 8m GV | 5000008668 |
| Internal Vib. IREN 57/10mGV | IREN 57 10m GV | 5000008673 |
| 57 mm Internal Vibrator Invert er | IRFUN 57/115 | 5000008482, 5000008481 |
| Internal Vib. IRSEN 57/115 | IRSEN 57/115 | 5000008599 |
| Int. Vib. IRSEN 57/115 Laser | IRSEN 57/115 Laser | 5000008646 |
| Internal Vib. IRSEN 57/250 | IRSEN 57/250 | 5000008651 |
| Internal Vib. IRSEN 57/250 GV | IRSEN 57/250 GV | 5000008656 |
| Ø 57 mm Internal Vibrator Inve rter, Rubber Tip | IRFUN 57/115 GV | 5000008724, 5000008628 |
| Int.Vib. IRSEN-FU 57/230 | IRSEN-FU 57/230 | 5000008725 |
| Int.Vib. IRSEN-FU 57/230 Laser | IRSEN-FU 57/230 Laser | 5000008728 |
| IRSEN-FU 115V 60HZ 57 | IRSEN-FU 57/115 | 5000008923 |
| IREN 57/42/18 | IREN 57/42/18 | 5100008951 |
| IREN58/042/10GV | IREN58/042/10GV | 5100053968 |
| Ø 57 mm Internal Vibrator Inve rter | IRFUN 57 | 5000007958 |
| Internal Vibrator IREN 57 | IREN 57 | 5000008346 |
| Internal Vib. IREN 57/115 | IREN 57/115 | 5000008465 |
| IREN58/250/5 | IREN58/250/5 | 5000008466 |
| 57 mm Internal Vibrator | IREN 57/240/180 | 5000008479 |
| Internal Vib. IRFUN 57/230 WSZ | IRFUN 57/230 | 5000008613 |
| Internal Vib. IREN 57/250GV | IREN 57/250 GV | 5000008624 |
| Internal vib. IRFUN 57 GV | IRFUN 57 GV | 5000008632, 5000008637 |
| Ø 38 mm Internal Vibrator Inve rter, short | IRFUN 57/115 8m | 5000008777, 5000008928 |
| Ø 38 mm Internal Vibrator Inve rter, short | IRFUN 57/115 10m | 5000008778 |
| Ø 57 mm Internal Vibrator Inve rter, Rubber Tip | IRFUN 57/115 GV 8m | 5000008779 |
| Ø 57 mm Internal Vibrator Inve rter, Rubber Tip | IRFUN 57/115 GV 10m | 5000008780 |
| Int. Vib. w. inverter IRFU 57 | IRFUN 57/230 7m | 5000610107 |
| Int.Vib.w.conv.IRFUN 57-8m | IRFUN 57/230 8m | 5000610108 |
| IRSEN FU57,115/60HZ,1 METER | IRSEN-FU 57/115 WC | 5000610153 |
| IRFU58/230/5 | IRFU58/230/5 | 5000610007 |
| IRFU58/120/5 UK | IRFU58/120/5 UK | 5000610008 |
| IRFU57 Internal Vibrator, 115V, 2.3", 5 Meter | IRFU57/120/5 US | 5000610009 |
| IRFU58/230/5 CH | IRFU58/230/5 CH | 5000610263 |
| High frequency internal vibrator High frequency internal vibrator with integrated converter IRFU57/120/5r | IRFU 57/120 GV GB | 5000610264 |
| IRFU58/230/5GV | IRFU58/230/5GV | 5000610265 |
| Int Vib. Con. IRFU57/230 GV CH | IRFU 57 GV CH | 5000610266 |
| IRSE-FU58/230 | IRSE-FU58/230 | 5000610267 |
| IRSE-FU 57/230/03 | IRSE-FU 57/230 Laser | 5000610268 |
| IRFU57 Internal Vibrator, 115V, 2.3", 8 Meter | IRFU57/120/8 US | 5000610269 |
| IRFU57 Internal Vibrator, 115V, 2.3", 10 Meter | IRFU57/120/10 US | 5000610270 |
| Int. Vib. w. Conv. IRSE-FU 57/120 GB | IRSE-FU 57/120 GB | 5000610271 |
| Int. Vib. w. Conv. IRFU 57/120 GB 8m | IRFU 57/120 GB 8m | 5000610272 |
| Int. Vib. w. Conv. IRFU 57/230 7m | IRFU 57 7m | 5000610273 |
| Int. Vib. Conv. IRFU57/230 8m | IRFU 57 8m | 5000610274 |
| IRSEFU 57 | IRSE-FU 57/120 US | 5000610275 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
