Wacker Neuson 5000108507 Rebuild Kit Internal Vibrator Dia. 45
Wacker Neuson

Wacker Neuson 5000108507 Rebuild Kit Internal Vibrator Dia. 45

$1,067.01
(No reviews yet) Write a Review
SKU:
5000108507-Wacker Neuson
Adding... The item has been added

The Wacker Neuson is a genuine OEM Rebuild Kit Internal Vibrator Dia. 45 designed for the IRFUN 45, IRFU 45, and IRSEN-FU 45 series 45 mm internal concrete vibrators. Sourced directly from Wacker Neuson, this kit delivers the correct components engineered to restore the vibrator head to proper operating condition. It is confirmed compatible with a wide range of IRFUN, IRFU, and IRSEN-FU 45 mm vibrator models across multiple voltage configurations including 115V, 120V, and 230V variants.

Key Features

  • Genuine OEM Component Set — Each part in this kit meets Wacker Neuson's original vibrator head tolerances, ensuring the eccentric weight and bearing surfaces are restored to the correct running clearances for consistent concrete consolidation.
  • Direct-Fit for 45 mm Vibrator Heads — Engineered specifically for the 45 mm needle diameter used across the IRFUN 45, IRFU 45, and IRSEN-FU 45 families, so the kit installs against existing housings without modification.
  • Broad Voltage Compatibility — Covers 115V, 120V, and 230V model variants including standard, Laser, WGB, WC, UK, US, and CH configurations, making this a single rebuild solution across most IRFU/IRSEN-FU 45 mm units in your fleet.
  • Restores Full Vibration Output — A worn or damaged internal vibrator head loses amplitude and frequency, leaving voids and honeycombing in concrete pours. This kit brings the head back to its designed vibration performance so consolidation is thorough and consistent.
  • Extends Service Life of the Vibrator Unit — Rebuilding the head with OEM components rather than replacing the entire vibrator unit preserves the converter and hose investment while returning the tool to like-new condition.

An internal concrete vibrator works by spinning an eccentric weight inside the vibrator head at high frequency, generating rapid vibration that liquefies the concrete mix momentarily and allows air bubbles and voids to escape to the surface. When the internal components of the head — including the bearings, eccentric weight, and seals — wear or fail, vibration amplitude drops and the tool can no longer properly consolidate the mix, risking structural weaknesses in the finished pour. The Wacker Neuson 5000108507 Rebuild Kit Internal Vibrator Dia. 45 provides the replacement internals needed to restore the head to full vibration output, extending the working life of the unit and keeping concrete quality on spec.

Part Details

Part Number5000108507
Old Part Number0108507
BrandWacker Neuson
Part TypeGenuine OEM
DescriptionRebuild Kit, Internal Vibrator, Dia. 45

Compatibility & Fitment

Name Model Machine Number
45 mm Internal Vibrator Invert er IRFUN 45/115 5000008497, 5000008496, 5000008773
Int. Vib. IRSEN-FU 45/230 IRSEN-FU 45/230 5000008726
Int.Vib. IRSEN-FU 45/230 Laser IRSEN-FU 45/230 Laser 5000008729
Int. Vib. IRSEN-FU 45/115 WGB IRSEN-FU 45/115 WGB 5000008922
Ø 45 mm Internal Vibrator Inve rter IRFUN 45 5000007957
Internal Vib. IRFUN 45/230 WSZ IRFUN 45/230 5000008612
Ø 45 mm Internal Vibrator Inve rter IRFUN 45/115 10m 5000008774
Int.Vibrator IRFUN 45 - 7m IRFUN 45/230 7m 5000610109
Internal Vibrator IRFUN 45/230 8m 5000610110
IRSEN FU45,115/60HZ,1 METER IRSEN-FU 45/115 WC 5000610154
IRFU45/230/5 IRFU45/230/5 5000610024
IRFU45/120/5 UK IRFU45/120/5 UK 5000610097
IRFU45 Internal Vibrator, 115V, 1.8", 5 Meter IRFU45/120/5 US 5000610098
IRFU45/230/5 CH IRFU45/230/5 CH 5000610253
IRSE-FU45/230 IRSE-FU45/230 5000610256
IRSE-FU 45/230/03 IRSE-FU45/230 Laser 5000610257
Int. Vib. w. Conv. IRSE-FU 45/120 GB IRSE-FU 45/120 GB 5000610258
Int. Vib. w. Conv. IRFU 45/230 7m IRFU 45/230 7m 5000610259
Int. Vib. w. Conv. IRFU 45/230 8m IRFU 45/230 8m 5000610260
IRSEFU 45 IRSE-FU 45/120 US 5000610261

Verify Before You Order

Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.

Why Buy From DHS Equipment

Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.

Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.