The Wacker Neuson Cylinder Head Gasket Set is a genuine OEM component designed for a wide range of Wacker Neuson diesel-powered equipment, including PT2H centrifugal trash pumps, DPU 2440H through DPU 2560H reversible vibratory plate compactors, DPS 1850H and DPS 2050H single-direction vibratory plates, the DPS 3060Hv, and the DS70H vibratory rammer. Sourced directly from Wacker Neuson, part number is manufactured to the exact tolerances required to maintain a reliable combustion chamber seal across all compatible models. This gasket set covers the complete cylinder head sealing interface, ensuring proper compression and preventing coolant or combustion gas leaks that would compromise machine output. If you're servicing any of the listed DPU, DPS, DS70H, or PT2H units, this is the correct OEM-specified set to use.
Key Features
- OEM-Grade Sealing Materials — Each gasket in the set is produced to Wacker Neuson's exact material and compression specifications, ensuring the cylinder head joint holds under the thermal cycling and combustion pressures typical of diesel-powered compaction and pump equipment.
- Complete Set for Full Head Service — Includes all gaskets needed for a cylinder head removal and reinstall, so you won't need to source individual pieces separately — everything required for a proper head reseal is in one part number.
- Broad Cross-Family Fitment — Confirmed fit across PT2H trash pumps, DPU 2440H / 2450H / 2540H / 2550H / 2560H / 2560H-TS reversible plates, DPS 1850H / 2050H / 3060Hv single-direction plates, and the DS70H vibratory rammer — all sharing the same Honda diesel engine platform.
- Protects Compression and Engine Output — A failed or worn cylinder head gasket allows combustion gases to escape, causing loss of compression, overheating, and reduced machine performance. Replacing with the correct OEM set restores full engine integrity.
- Combustion Safety Compliance — Using the correct OEM head gasket is critical on diesel engines: an improper seal can lead to coolant contamination of combustion oil, engine damage, or uncontrolled exhaust leaks — all of which create unsafe operating conditions on the worksite.
The cylinder head gasket set seals the joint between the engine block and the cylinder head, containing combustion pressure and preventing the mixing of engine oil, coolant, and combustion gases. On diesel-powered compaction and pump equipment like the DPU, DPS, DS70H, and PT2H series, this seal is under constant thermal stress — expansion and contraction cycles during startup, operation, and shutdown gradually wear the gasket material over time. When the head gasket fails, you'll typically see loss of engine power, white or blue exhaust smoke, oil contamination, or overheating — all signs that the engine can no longer hold a proper combustion seal and requires immediate servicing with a correct replacement set.
Part Details
| Part Number | 5000108697 |
|---|---|
| Old Part Number | 0108697 |
| Brand | Wacker Neuson |
| Part Type | Genuine OEM |
| Description | Cylinder Head Gasket Set |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| PT2H Pump | PT2H | 5000009094, 5000009097, 5000009239 |
| DPU2540H | DPU 2540H | 5000610035, 5000008755 |
| DPU 2550H | DPU 2550H | 5000610036, 5000008756 |
| DPU 2560H | DPU 2560H | 5000610037, 5000008757 |
| DPU 2560H-TS | DPU 2560H-TS | 5000610038, 5000610005 |
| DS70H Vibratory Rammer, 13" Plastic Shoe EPA | DS70 | 5200010976 |
| DPS1850H Asphalt | DPS1850H Asphalt | 5000610033, 5000008925 |
| DPS1850H Basic | DPS1850H Basic | 5000610032, 5000008924 |
| DPS1850H Vario | DPS1850H Vario | 5000610034, 5000008926 |
| Reversible Vibratory Plate, 24 kN, 40cm/16in | DPU 2440H | 5000007870 |
| Single Direction Vibratory Pla te, 18kN, 50cm/20in | DPS 1850H | 5000008397, 5000008750 |
| Vibration plate DPU 2450H | DPU 2450H | 5000008746 |
| DPS2050H | DPS2050H | 5100061223 |
| DPS2050Hw | DPS2050Hw | 5100061224 |
| DPS3060Hv | DPS3060Hv | 5100016643 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
