The Wacker Neuson Cam is a genuine OEM component designed for a wide range of Wacker Neuson equipment, including DPU-series reversible vibratory plate compactors, PT2H and PT3H self-priming centrifugal trash pumps, the HSH350 hydronic surface heater, DPS-series single-direction vibratory plates, and the DS70 diesel rammer. Sourced directly from Wacker Neuson, part is manufactured to the same specification as the original, ensuring a correct, direct installation with no guesswork. Compatible models span the DPU 2440H through DPU 3760H series, DPS 1850H and DPS 2050H variants, PT2H and PT3H pump families, the E1100 ground heater, and the HSH350 surface heater. When you need a dependable OEM replacement to restore proper engine timing and valve operation, the Wacker Neuson is the correct part for the job.
Key Features
- Genuine OEM Precision Profiling — Manufactured to Wacker Neuson's original cam lobe geometry, ensuring correct valve lift, timing, and duration for proper engine operation across all listed models.
- Direct-Installation Fit — Engineered to drop into the same cam bore position as the factory part, with matching journal dimensions and lobe placement for a straightforward swap.
- Broad Cross-Family Compatibility — A single verified part number covering DPU 2440H–3760H reversible plate compactors, DPS 1850H–3060H single-direction plates, PT2H and PT3H trash pumps, DS70 diesel rammer, and HSH350 and E1100 heater units.
- Restored Engine Timing Accuracy — A worn or damaged cam causes erratic valve actuation, poor compression, hard starting, and loss of power; replacing with the correct OEM cam restores crisp, consistent engine performance.
- Fuel System Integrity — Correct cam timing directly governs fuel delivery cycles; using a properly profiled OEM cam helps maintain fuel efficiency and prevents over-fueling or lean conditions at the engine.
The cam is a precision-machined rotating shaft component inside the engine that controls the opening and closing of the intake and exhaust valves in time with the piston's movement. Each lobe on the cam pushes against a follower or rocker arm at a precise moment in the engine cycle, allowing the correct amount of air and fuel in and exhaust gases out. When a cam wears down, develops a flat spot on a lobe, or becomes damaged, valve timing falls out of sequence — the result is hard starting, rough running, low power output, and in severe cases, internal engine damage. Replacing a worn cam with the correct OEM part restores the engine's intended timing relationship and brings performance back to specification.
Part Details
| Part Number | 5000108755 |
|---|---|
| Old Part Number | 0108755 |
| Brand | Wacker Neuson |
| Part Type | Genuine OEM |
| Description | Cam |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| Hydronic Surface Heater | HSH350 | 5000620254, 5200001677 |
| PT3H Pump | PT3H | 5000009100, 5000009103, 5000009242, 5100014963, 5100014964 |
| PT2H Pump | PT2H | 5000009094, 5000009097, 5000009239 |
| E1100 GROUND HEATER | E1100 | 5000620172, 5200001676 |
| DPU2540H | DPU 2540H | 5000610035, 5000008755 |
| DPU 2550H | DPU 2550H | 5000610036, 5000008756 |
| DPU 2560H | DPU 2560H | 5000610037, 5000008757 |
| DPU 2560H-TS | DPU 2560H-TS | 5000610038, 5000610005 |
| DPU 3050H | DPU 3050H | 5000610039, 5000008759 |
| DPU 3060H | DPU 3060H | 5000610040, 5000008760 |
| DPU 3070H | DPU 3070H | 5000610041, 5000008908 |
| DPU 3060H-TS | DPU 3060H-TS | 5000610042, 5000610006 |
| DPU 3050HE | DPU 3050HE | 5000610298 |
| DPU 3060HE-TS | DPU 3060HE-TS | 5000610302 |
| DS70H Vibratory Rammer, 13" Plastic Shoe EPA | DS70 | 5200010976 |
| DPS1850H Asphalt | DPS1850H Asphalt | 5000610033, 5000008925 |
| DPS1850H Basic | DPS1850H Basic | 5000610032, 5000008924 |
| DPS1850H Vario | DPS1850H Vario | 5000610034, 5000008926 |
| DPU 3050H US | DPU 3050H US | 5100000310 |
| DPU 3750Hts | DPU 3750Hts | 5000610321 |
| DPU 3750Hets | DPU 3750Hets | 5000610322 |
| DPU 3760Hts | DPU 3760Hts | 5000610358 |
| DPU 3760Hets | DPU 3760Hets | 5000610359 |
| DPU 3750Hts US | DPU 3750Hts US | 5100000311 |
| Reversible Vibratory Plate, 24 kN, 40cm/16in | DPU 2440H | 5000007870 |
| Single Direction Vibratory Pla te, 18kN, 50cm/20in | DPS 1850H | 5000008397, 5000008750 |
| Vibration plate DPU 2450H | DPU 2450H | 5000008746 |
| Vibration Plate | DPU 3050Hw US Army | 5100009915 |
| DPS2050H | DPS2050H | 5100061223 |
| DPS2050Hw | DPS2050Hw | 5100061224 |
| DPS3060Hv | DPS3060Hv | 5100016643 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
