The Wacker Neuson Ignition Cable 1 Meter is a genuine OEM component designed for the BTS series gasoline cut-off saws, including the BTS 930, BTS 935, BTS 1030, BTS 1035, and BTS 1140 L3 models. This factory-sourced ignition cable ensures a clean, consistent spark signal from the ignition module to the spark plug, maintaining the reliable starts and steady power delivery that cut-off saw operators depend on in demanding cutting applications. As a direct OEM replacement, part number matches the original cable length of 1 meter and all factory connection specifications, dropping in without modification across the full BTS model range.
Key Features
- Correct Spark Signal Transmission — Manufactured to OEM resistance and insulation specs, this ignition cable delivers a full-strength spark signal with no degradation across the 1-meter cable length.
- Genuine Wacker Neuson OEM Part — Sourced directly from Wacker Neuson, this part carries the same materials and tolerances as the cable installed on the production line.
- Broad BTS Series Compatibility — Fits a wide range of Wacker Neuson BTS gasoline cut-off saws, including BTS 930, BTS 935, BTS 1030, BTS 1035, and BTS 1140 L3 variants.
- Correct 1-Meter Cable Length — Pre-cut to factory length so the cable routes correctly within the saw's housing without slack or tension that can cause premature wear.
- Ignition System Integrity — A worn or cracked ignition cable causes hard starting, misfires, or complete no-start conditions; replacing it with part 5000109753 restores full ignition performance.
- Fuel System Safety Compliance — A properly insulated ignition cable prevents stray spark discharge near the fuel system, which is especially important on handheld gasoline-powered cutting equipment.
The ignition cable carries the high-voltage electrical pulse generated by the ignition module to the spark plug, triggering combustion in the engine cylinder. On gasoline cut-off saws like the BTS series, a healthy ignition cable is critical for clean starts and consistent engine power under load — particularly important when cutting concrete, masonry, or asphalt where the saw must maintain steady RPM. When the cable insulation cracks, corrodes at the terminal, or stretches beyond its designed length, the spark signal weakens or fails entirely, resulting in hard starting, rough running, or a complete no-start condition that takes the saw out of service.
Part Details
| Part Number | 5000109753 |
|---|---|
| Old Part Number | 0109753 |
| Brand | Wacker Neuson |
| Part Type | Genuine OEM |
| Description | Ignition Cable 1 Meter |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| Power Cutter BTS 1035 L3 | BTS 1035 L3 | 5000008912, 5000008990, 5000610076, 5000610182 |
| Cut-Off Saws | BTS 1030 L3 | 5000008989, 5000610075 |
| Cut-Off Saws | BTS 930 L3 | 5000008987, 5000610073 |
| Cut-Off Saws | BTS 935 L3 | 5000008988, 5000610074 |
| Cut-off Saw with 20mm Arbor | BTS 930 | 5000008340 |
| Cut-off Saw with 1in Arbor | BTS 935 | 5000008341 |
| Cut-off Saw with 1in Arbor | BTS 1035 | 5000007975 |
| Cut-off Saw with 20mm Arbor | BTS 1030 | 5000008339 |
| BTS 1140L3 SAW | BTS 1140 L3 | 5000610063, 5000610078 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
