The Wacker Neuson Main Jet #65 is a genuine OEM carburetor main jet designed for a wide range of Wacker Neuson CT-series walk-behind concrete power trowels and WP-series single-direction vibratory plate compactors. As a direct factory replacement, part is manufactured to the exact specifications required to maintain proper fuel metering in the carburetor. Compatible machines include the CT30AGT, CT36-5A, CT36ADP, CT36ADT, WP1540A, WP1540AW, WP1550A, and WP1550AW, among other models in these families.
Key Features
- Exact Fuel Metering Orifice — Sized to the #65 specification, this jet delivers the precise fuel-to-air ratio the carburetor requires for correct engine operation across the full RPM range.
- Genuine OEM Construction — Sourced directly from Wacker Neuson, this jet is made from the same brass alloy used in original production, maintaining orifice integrity under repeated heat and fuel-flow cycles.
- Direct Carburetor Drop-In — Threaded to the OEM standard, the 5000110589 seats and torques into the carburetor bowl the same way as the original, with no re-jetting or modification needed.
- Broad Model Coverage — A single part number covers CT30 and CT36 walk-behind trowel families as well as WP1540 and WP1550 vibratory plate families, making it a practical stock item for mixed fleets.
- Protects Engine Performance — A worn or clogged main jet starves the engine of fuel at load, causing lean running, overheating, and power loss; replacing it with a correctly sized OEM jet restores full-load engine output.
The main jet is a small but critical component inside the carburetor's fuel circuit. It contains a precisely drilled orifice that meters the volume of fuel drawn into the airstream when the engine is operating under load. If the jet becomes clogged with varnish or debris — common after extended storage or contaminated fuel — the engine will run lean, lose power, surge, or refuse to reach full RPM. Replacing the main jet with the correct OEM-sized #65 unit restores the calibrated fuel flow the carburetor was designed around, returning the engine to its intended output and protecting it from the damage that lean running causes over time.
Part Details
| Part Number | 5000110589 |
|---|---|
| Old Part Number | 0110589 |
| Brand | Wacker Neuson |
| Part Type | Genuine OEM |
| Description | Main Jet #65 |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| CT36-5A Trowel | CT36-5A | 5000009438, 5200016256 |
| CT36-5A | CT36-5A EU | 5000620829 |
| CT36-5A-C Trowel | CT36-5A-C | 5000620040 |
| 915mm/36in CE Walk-behind Trow el | CT36ADP | 5000007592, 5000007591 |
| 915mm/36in CE Walk-behind Trow el | CT36ADP-E | 5000008034, 5000007697 |
| 762mm/30in CE Walk-behind Trow el | CT30AGT-E | 5000007589, 5000008004 |
| 762mm/30in CE Walk-behind Trow el | CT30AGT | 5000008006, 5000008003 |
| Vibratory Plate, 15kN, 400mm/1 5.5in | WP1540AW | 5000008060, 5000009472, 5000009545 |
| WP1540A VIBROPLATE | WP1540A | 5000008061 |
| Vibratory Plate, 15 kN, 500mm/ 19.5in | WP1550AW | 5000007576, 5000009486 |
| WP1550A Single Direction Vibratory Plate | WP1550A | 5000007579 |
| 915mm/36in CE Walk-behind Trow el | CT36ADT-E | 5000007590, 5000008008, 5000008226 |
| 915mm/36in CE Walk-behind Trow el | CT36ADT | 5000008013, 5000008007, 5000008198, 5000008225, 5000009480 |
| 50mm/2in Centrifugal Trash Pum p | PT2A | 5000006720, 5000006721 |
| Vibratory Plate | VPA1740 | 5000006794, 5000008062 |
| Vibratory Plate 587mm/18in | VPG165A | 5000008038 |
| Vibratory Plate | VPA1750 | 5000006792 |
| Vibratory Plate 587mm/18in | VPG170A | 5000008039 |
| Vibratory Plate 500mm/19.5in | VPA1350W | 5000006793 |
| Vibratory Plate 400mm/15.5in | VPA1340 | 5000007154 |
| Vibratory Truss Screed, Power Section | HP100 | 5000008291 |
| Vibratory Truss Screed, Power Section | HP50 | 5000008292 |
| Vibratory Truss Screed, Power Section | SP75 | 5000008295 |
| Vibratory Truss Screed, Power Section | SP50 | 5000008296 |
| Vibratory Truss Screed, Power Section | HP100A | 5000009506 |
| HP50A | HP50A | 5000009508 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
