The Wacker Neuson Main Jet #65 is a genuine OEM carburetor main jet designed for a wide range of Wacker Neuson equipment, including CT36-5A walk-behind concrete power trowels, WP and VP series single-direction vibratory plate compactors, BPU series reversible vibratory plates, and select PT series trash pumps. As a direct OEM replacement, the is manufactured to the exact calibration and flow specification of the original part, ensuring the carburetor delivers the correct fuel-to-air ratio your engine depends on. This jet is a critical fuel metering component, and using the correct size — #65 — is essential for proper engine throttle response and full-load performance. Confirm your model number before ordering; this part covers an extensive fitment range across multiple Wacker Neuson equipment families.
Key Features
- Calibrated to OEM Flow Spec — Sized at #65, this jet meters fuel at the exact orifice diameter specified by Wacker Neuson for correct mixture delivery at full throttle.
- Genuine OEM Part — Sourced directly from Wacker Neuson, the 5000151041 meets the same material and dimensional standards as the jet installed at the factory.
- Broad Cross-Family Fitment — Compatible with CT36-5A concrete power trowels, WP/VP/WPU/WPP single-direction and reversible vibratory plates, BPU2540A compactors, PT2A trash pumps, and additional models across the Wacker Neuson lineup.
- Restores Fuel Delivery Accuracy — A worn, clogged, or incorrect main jet causes rich or lean running, rough idle, power loss, and hard starting; replacing it with the correctly sized OEM jet brings engine performance back to spec.
- Drop-In Carburetor Fit — Threaded directly into the main jet port of the carburetor body with no modification; standard hex fitting accepts a common jet screwdriver or jet tool.
The main jet is the primary fuel metering component inside the carburetor. It is a precisely sized orifice that controls how much fuel enters the engine's air stream during mid-range and wide-open throttle operation. When the jet becomes clogged with varnish or debris from stale fuel, or if it is damaged and replaced with an incorrectly sized substitute, the engine will run too lean or too rich — leading to power loss, overheating, or hard starting. Replacing a failed or fouled jet with the correctly calibrated OEM unit restores proper combustion and protects the engine from fuel-related wear.
Part Details
| Part Number | 5000151041 |
|---|---|
| Old Part Number | 0151041 |
| Brand | Wacker Neuson |
| Part Type | Genuine OEM |
| Description | Main Jet #65 |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| CT36-5A Trowel | CT36-5A | 5000009438, 5200016256 |
| CT36-5A | CT36-5A EU | 5000620829 |
| CT36-5A-C Trowel | CT36-5A-C | 5000620040 |
| PG3A | PG3A | 5000009055 |
| Vibratory Plate, 15kN, 400mm/1 5.5in | WP1540AW | 5000008060, 5000009545, 5000009472, 5000630045 |
| Vibratory Plate, 15 kN, 500mm/ 19.5in | WP1550AW | 5000007576, 5000009546, 5000630043, 5000009486 |
| WP1540A VIBROPLATE | WP1540A | 5000008061, 5000630017, 5000630046 |
| WP1550A Single Direction Vibratory Plate | WP1550A | 5000007579, 5000630019, 5000630044 |
| VP1550AW VIBROPLATE | VP1550AW | 5000009028, 5000630055 |
| VP1340AW VIBROPLATE | VP1340AW | 5000009032, 5000630058 |
| WPU1550A | WPU1550A | 5000630033, 5100071592 |
| WPU1550Aw | WPU1550Aw | 5000630034 |
| VP1550A Single Direction Vibratory Plate | VP1550A | 5000009027, 5000630054 |
| VP1340A VIBROPLATE | VP1340A | 5000009031, 5000630057 |
| VP2050A VIBROPLATE | VP2050A | 5000009087, 5000630062 |
| Single Direction Plate | VPH70 | 5000006907 |
| WPP 1550Aw | WPP1550Aw | 5000630030 |
| Modular Internal Vibrators | HD 3.7 | 5000006906 |
| Single Direction Plates | AP1550AW | 5000009540 |
| WPP 1540A | WPP1540A | 5000630025 |
| WPP 1550A | WPP1550A | 5000630029 |
| WP 2050A | WP2050A | 5000630022 |
| WPP 1540Aw | WPP1540Aw | 5000630026 |
| Single Direction Plates | AP1550A | 5000009539 |
| Soil and Asphalt Compaction | MP15A | 5000630318 |
| Vibratory Truss Screed, Power Section | HP100A | 5000009506 |
| HP50A | HP50A | 5000009508 |
| VP2050AW VIBROPLATE | VP2050AW | 5000009510 |
| Single Direction Plates | WP1540Aw-L | 5000630123 |
| Reversible Plates | WPU 1550A-L | 5000630124 |
| Single Direction Plates | WP2050Aw-L | 5000630125 |
| Single Direction Plates | WP1550Aw-L | 5000630126 |
| BPU2540A | BPU 2540A | 5000008758 |
| HPG50A | HPG50A | 5000009509 |
| Single Drum Vibratory Roller | RS600A | 5000630010 |
| Single Direction Plates | WP1550Aw | 5000630112 |
| Single Direction Plate | WP2050Aw | 5000630115 |
| Single Direction Plates | WP1540Aw | 5000630106 |
| VP1550AW/WH | VP1550AW/WH | 5000630373 |
| VP1340AW/WH | VP1340AW/WH | 5000630374 |
| WPU1550AW-US | WPU1550AW-US | 5100069715 |
| WPU1550Aw | WPU1550AW | 5100071591 |
| WPU1550A-US | WPU1550A-US | 5100069716 |
| BPU 2540A US | BPU 2540A US | 5000610360 |
| PT2A | PT2A | 5100058524, 5100058525 |
| HPG100A | HPG100A | 5000009507 |
| A5000/160 ISO | A5000/160 ISO | 5000610325 |
| A5000/160 ANSI | A5000/160 ANSI | 5000610340 |
| Single direction vibratory plate WP1235A | WP1235A | 5000630016 |
| Modular Internal Vibrators | D3.5A3 | 5100072402 |
| Modular Internal Vibrators | D3.5A2 | 5100072405 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
