The Wacker Neuson is a genuine OEM Starter Housing designed for a wide range of Wacker Neuson equipment, including CT36 and CT30 walk-behind concrete trowels, PT2A centrifugal trash pumps, PDT and PDI diaphragm trash pumps, VP and WP series single-direction vibratory plates, BPU reversible vibratory plates, G2.1 and G2.5 portable generators, and vibratory truss screed power sections. As a genuine OEM component, part number is manufactured to the exact specifications of the original part, ensuring a proper, direct fit without guesswork. This Starter Housing is the correct factory replacement for a broad cross-section of Wacker Neuson gasoline-powered equipment across multiple product families.
Key Features
- Genuine OEM Construction: — Molded and dimensioned to the original Wacker Neuson engineering spec, ensuring the pull-cord mechanism seats, aligns, and engages exactly as the factory-installed unit did.
- Broad Cross-Family Fitment: — Covers CT30 and CT36 walk-behind trowels, PT2A and PDT/PDI diaphragm trash pumps, VP/WP/BPU vibratory compaction plates, G2.1 and G2.5 portable generators, and HP/SP vibratory truss screed power sections — all under one part number.
- Direct Drop-In Replacement: — Mounts to the existing recoil starter and engine block attachment points with no modifications to surrounding components needed, keeping rebuild time to a minimum.
- Protects the Recoil Starter Mechanism: — The housing shields the recoil spring, pawl, and pull-cord assembly from debris, concrete slurry, and water ingress — conditions common on trowel and pump jobsites. A cracked or broken housing leaves these components exposed and leads to premature starter failure.
- Restores Clean, Reliable Starting: — A damaged or missing starter housing disrupts the recoil return stroke and can cause the cord to jam or the starter to disengage mid-pull. Replacing it with part 5000110768 restores smooth, consistent engine starting.
The starter housing is the outer shell that encloses and protects the recoil starter assembly on a gasoline engine. It anchors the pull-cord guide, contains the recoil spring under tension, and channels the engagement force from the rope to the starter pawls that spin the engine over on startup. When the housing cracks, warps, or breaks — whether from impact, heat cycling, or UV degradation — the recoil mechanism can bind, the rope can fray against rough edges, or the starter can fail to return properly after each pull. Replacing a damaged starter housing promptly keeps the engine starting cleanly and prevents further damage to the recoil components seated inside it.
Part Details
| Part Number | 5000110768 |
|---|---|
| Old Part Number | 0110768 |
| Brand | Wacker Neuson |
| Part Type | Genuine OEM |
| Description | Starter Housing |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| CT36-5A Trowel | CT36-5A | 5000009438, 5200016256 |
| CT36-5A | CT36-5A EU | 5000620829 |
| CT36-5A-C Trowel | CT36-5A-C | 5000620040 |
| 50mm/2in Diaphragm Trash Pump | PDT2A | 5000007610, 5000007611 |
| 75mm/3in Diaphragm Trash Pump | PDT3A | 5000007614, 5000007615, 5000007616 |
| 50mm/2in Inline Diaphragm Tras h Pump | PDI2A | 5000007624, 5000007625 |
| 75mm/3in Inline Diaphragm Tras h Pump | PDI3A | 5000007628, 5000007629, 5000009407 |
| PT2A | PT2A | 5000009095, 5000009237, 5000009092, 5000006720, 5000006721 |
| 915mm/36in CE Walk-behind Trow el | CT36ADP | 5000007592, 5000007591 |
| 915mm/36in CE Walk-behind Trow el | CT36ADP-E | 5000008034, 5000007697 |
| 762mm/30in CE Walk-behind Trow el | CT30AGT-E | 5000007589, 5000008004 |
| 762mm/30in CE Walk-behind Trow el | CT30AGT | 5000008006, 5000008003 |
| Vibratory Plate, 15kN, 400mm/1 5.5in | WP1540AW | 5000008060, 5000009472, 5000009545 |
| WP1540A VIBROPLATE | WP1540A | 5000008061, 5000630017 |
| Vibratory Plate, 15 kN, 500mm/ 19.5in | WP1550AW | 5000007576, 5000009486 |
| WP1550A Single Direction Vibratory Plate | WP1550A | 5000007579, 5000630019 |
| 762mm/30in CE Walk-behind Trow el | CT30ADT | 5000008005, 5000008001, 5000008197 |
| 915mm/36in CE Walk-behind Trow el | CT36ADT-E | 5000007590, 5000008008, 5000008226 |
| 915mm/36in CE Walk-behind Trow el | CT36ADT | 5000008013, 5000008007, 5000008198, 5000008225, 5000009480 |
| VP1135AW VIBROPLATE | VP1135AW | 5000009058, 5000630060 |
| VP1550AW VIBROPLATE | VP1550AW | 5000009028, 5000630055 |
| VP1340AW VIBROPLATE | VP1340AW | 5000009032, 5000630058 |
| VP1135A VIBROPLATE | VP1135A | 5000009057, 5000630059 |
| VP1550A Single Direction Vibratory Plate | VP1550A | 5000009027, 5000630054 |
| VP2050A VIBROPLATE | VP2050A | 5000009087, 5000630062 |
| WPU1550A | WPU1550A | 5000630033 |
| WPU1550Aw | WPU1550Aw | 5000630034 |
| Vibratory Plate | VPA1740 | 5000006794, 5000008062 |
| Vibratory Plate 587mm/18in | VPG165A | 5000008038 |
| 50Hz Portable Generator | G2.1AE | 5000008250, 5000008244, 5000008246, 5000008248 |
| WPP 1550Aw | WPP1550Aw | 5000630030 |
| Vibratory Plate | VPA1750 | 5000006792 |
| 762mm/30in CE Walk-behind Trow el | CT30ADT-E | 5000007587, 5000008002 |
| Vibratory Plate 587mm/18in | VPG170A | 5000008039 |
| 50Hz Portable Generator | G2.1A | 5000008249, 5000008243, 5000008245, 5000008247 |
| Single Direction Plates | AP1550AW | 5000009540 |
| Single direction vibratory plate WP1235A | WP1235A | 5000630016 |
| WPP 1540A | WPP1540A | 5000630025 |
| WPP 1550A | WPP1550A | 5000630029 |
| Portable Generator | G2.5A | 5000007188, 5000009256 |
| 50Hz Portable Generator | G5.7AE | 5000009017 |
| WP 2050A | WP2050A | 5000630022 |
| WPP 1540Aw | WPP1540Aw | 5000630026 |
| BPU2540A | BPU 2540A | 5000008758 |
| Single Direction Plates | AP1550A | 5000009539 |
| Single Direction Plates | WP1235Aw | 5000630103 |
| Single Direction Plates | WP1235Aw-L | 5000630104, 5000630105 |
| Single Direction Plates | WP1235Aw-LL | 5000630122 |
| VP2050AW VIBROPLATE | VP2050AW | 5000009510 |
| Single Direction Plates | AP1135A | 5000009519 |
| Single Direction Plates | WP1550Aw | 5000630112 |
| Single Direction Plate | WP2050Aw | 5000630115 |
| Single Direction Plates | WP1540Aw-L | 5000630123 |
| Reversible Plates | WPU 1550A-L | 5000630124 |
| Single Direction Plates | WP1550Aw-L | 5000630126 |
| Vibratory Plate 500mm/19.5in | VPA1350W | 5000006793 |
| Single Direction Plates | WP1540Aw | 5000630106 |
| Vibratory Plate 400mm/15.5in | VPA1340 | 5000007154 |
| BPU 2540A US | BPU 2540A US | 5000610360 |
| Single Drum Vibratory Roller | RS600A | 5000630010 |
| Single direction vibratory plate VP1340A | VP1340A | 5000630057 |
| Single Direction Plates | WP2050Aw-L | 5000630125 |
| Vibratory Truss Screed, Power Section | HP100 | 5000008291 |
| Vibratory Truss Screed, Power Section | HP50 | 5000008292 |
| Vibratory Truss Screed, Power Section | SP75 | 5000008295 |
| Vibratory Truss Screed, Power Section | SP50 | 5000008296 |
| Vibratory Truss Screed, Power Section | HP100A | 5000009506 |
| HP50A | HP50A | 5000009508 |
| A5000/160 ISO | A5000/160 ISO | 5000610325 |
| A5000/160 ANSI | A5000/160 ANSI | 5000610340 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
