Wacker Neuson 5000115661 Deere 10W30 Oil 2-1/2 Gallon Jug

The Wacker Neuson Deere 10W30 Oil 2-1/2 Gallon Jug is a genuine OEM engine oil specified for the G50, G70, G85, G110, G125, and G155 series skid-mounted mobile generators. Sourced directly through Wacker Neuson, this oil meets the exact lubrication requirements called out by the manufacturer for these generator engines — so you're not guessing at viscosity grades or formulation compatibility. The 2-1/2 gallon jug size is practical for scheduled oil changes on-site, giving technicians the right volume to complete a service fill without waste. If you're maintaining a G-series generator, part number is the correct OEM fluid to keep on hand.

Key Features

• OEM-Specified Viscosity Grade — 10W30 weight is the manufacturer-approved formulation for the John Deere engines powering Wacker Neuson G-series generators, ensuring correct film strength across operating temperatures.
• Genuine Wacker Neuson OEM Fluid — Sourced through the official Wacker Neuson parts channel, this oil meets the exact lubrication spec for these generator engines — no cross-referencing or substitution required.
• Broad G-Series Generator Compatibility — Fits G50, G70, G85, G110, G125, and G155 skid-mounted and cold-weather mobile generator configurations.
• Right-Sized for Field Service — The 2-1/2 gallon jug provides enough volume to complete a full oil change service on G-series generator engines without carrying excess fluid.
• Protects Engine Internals During Extended Operation — Correct oil viscosity maintains a stable lubricating film at high engine loads, reducing metal-to-metal contact and protecting bearings, rings, and cylinder walls during continuous generator run cycles.

Engine oil is the primary line of defense for any internal combustion engine — it lubricates moving parts, dissipates heat, and suspends contaminants until the next service interval. In a generator application, where the engine may run continuously under sustained electrical load, using the correct oil grade is especially important: too light a viscosity and the oil film breaks down under heat; too heavy and cold-start circulation suffers. The 10W30 designation on part 5000115661 reflects the viscosity range specified by the engine manufacturer for the John Deere power units used in Wacker Neuson G-series generators. Running low on oil or using an incorrect grade can accelerate wear, lead to overheating, and ultimately cause engine failure — making routine oil changes with the correct fluid one of the highest-value maintenance tasks on any generator.

Part Details

Compatibility & Fitment

Verify Before You Order

Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.

Why Buy From DHS Equipment

Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.

Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.