The Wacker Neuson Rope is a genuine OEM replacement built for a wide range of Wacker Neuson diaphragm pumps, dewatering pumps, centrifugal trash pumps, and single-direction vibratory plate compactors. As a factory-sourced component, this rope matches the original specification used on PDT2, PDT3, PDI2, PDI3, PG2, PG3, PT2R, VP1340, VP1550, VP2050, WP1540, WP1550, WP2050, WPP1540, and WPP1550 series machines. Sourcing the correct OEM rope ensures the pull-start recoil system operates as intended — providing consistent, reliable engagement every time the engine is started. Cross-referencing your machine's model and serial number against part number before ordering is always recommended to confirm an exact match.
Key Features
- Genuine OEM Cord Integrity — Sourced directly from Wacker Neuson, this rope meets the original tensile strength and diameter specification required for smooth pull-start operation across all covered models.
- Drop-In Starter Rope Replacement — Designed to thread and knot into the recoil starter assembly the same way as the original, making replacement straightforward for technicians and operators familiar with the pull-start system.
- Broad Cross-Series Compatibility — A single part number covers PDT, PDI, PG, PT, VP, WP, and WPP series machines, making 5000117259 a practical stock item for mixed Wacker Neuson fleets.
- Consistent Cold and Hot Starts — A worn or frayed starter rope causes incomplete pulls and failed start attempts; replacing it with this OEM rope restores full-length, smooth-action pulls so the engine fires on demand.
- Fuel System and Operator Safety — A rope that snaps mid-pull can snap back and cause hand or wrist injury; replacing a worn rope before failure keeps the start sequence controlled and safe for the operator.
The starter rope is the link between the operator and the engine's recoil starter mechanism. When you pull the handle, the rope engages the recoil assembly, spinning the crankshaft to initiate combustion. Over time, repeated pulling, UV exposure, and heat cycling cause the rope to fray, stretch, or snap — making the engine difficult or impossible to start. Replacing a worn starter rope promptly restores reliable engine starting and prevents the rope from breaking mid-pull, which can damage the recoil assembly and create a safety hazard for the operator.
Part Details
| Part Number | 5000117259 |
|---|---|
| Old Part Number | 0117259 |
| Brand | Wacker Neuson |
| Part Type | Genuine OEM |
| Description | Rope |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| 50mm/2in Diaphragm Trash Pump | PDT2 | 5000009494, 5000620770 |
| 75mm/3in Diaphragm Trash Pumps | PDT3 | 5000009495, 5000620774 |
| PG2 Dewatering Pump | PG2 | 5000009496, 5000009497 |
| PG3 Dewatering Pump | PG3 | 5000009498, 5000009499 |
| VP1340W VIBROPLATE | VP1340W | 5000008706, 5000630051 |
| Vibratory Plate, 15 kN, 500mm/ 19.5in | WP1550RW | 5000007578 |
| Vibratory Plate, 15 kN, 500mm/ 19.5in | WP1550R | 5000007581 |
| VP1550W VIBROPLATE | VP1550W | 5000008708, 5000630013, 5000630053 |
| VP1340 Single Direction Vibratory Plate | VP1340 | 5000008705, 5000630050 |
| VP1550 VIBROPLATE | VP1550 | 5000008707, 5000630052 |
| Vibratory Plate 300mm/12in | VPR1330 | 5000006512 |
| WP 1540W | WP1540W | 5000630018 |
| WP 1550W | WP1550W | 5000630020 |
| WP 2050W | WP2050W | 5000630023 |
| WPP 1540W | WPP1540W | 5000630027 |
| WPP 1550W | WPP1550W | 5000630031 |
| WPP 1550Ww | WPP1550Ww | 5000630032 |
| WPP 1540Ww | WPP1540Ww | 5000630028 |
| 50mm/2in Centrifugal Trash Pum p | PT2R | 5000007160, 5000006790 |
| VP2050W VIBROPLATE | VP2050W | 5000009537 |
| 500mm/50in, 20kN Value Vibrato ry Plate | VP2050 | 5000009530 |
| Single Direction Plates | VP1340W-L | 5000630001 |
| Single Direction Plates | VP1340W-LL | 5000630002 |
| Single Direction Plates | VP1340W-LF | 5000630003 |
| Single Direction Plate | WP1550Ww | 5000630113 |
| Single Direction Plate | WP2050Ww | 5000630116 |
| VP1340W VIBROPLATE, W/WHEEL KIT | VP1340W w/WH | 5000630121 |
| Single Direction Plate | WP1540Ww | 5000630111 |
| 50mm/2in Diaphragm Trash Pump | PDI2 | 5000009489 |
| 75mm/3in Diaphragm Trash Pump | PDI3 | 5000009491, 5000009492 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
