The Wacker Neuson Stud is a genuine OEM component designed for PT2 and PT3 series self-priming centrifugal trash pumps and LTN and LTW series light towers. As a direct OEM replacement sourced through authorized Wacker Neuson supply channels, this stud is manufactured to the exact material and dimensional standards of the original hardware. Fitment spans a wide range of PT2 and PT3 pump configurations — including PT2A, PT2H, PT2V, PT3A, PT3H, and PT3V variants — as well as LTN6, LTN8, LTW6K, LTW8K, and LTW20 light tower models across standard, cold weather, and Tier 4 configurations. Keeping the correct stud in service ensures structural integrity at critical fastening points and prevents loosening, misalignment, or leakage in demanding field conditions.
Key Features
- Genuine OEM Material Spec — Manufactured to the exact thread profile, grade, and dimensional tolerances specified by Wacker Neuson, ensuring proper clamp load and thread engagement at the fastening point.
- Drop-In Hardware Replacement — Matches the original stud's thread pitch and shank length for a direct swap with no rework to mating components or mounting surfaces.
- Broad Cross-Family Fitment — A single part number covers PT2 and PT3 trash pump variants (PT2A, PT2H, PT2V, PT3A, PT3H, PT3V) and a wide range of LTN and LTW light tower configurations, including Tier 4 and cold-weather builds.
- Structural Integrity at Critical Joints — A correctly torqued stud maintains consistent clamping force across mating surfaces; a worn, stripped, or incorrect stud can lead to joint loosening, cover misalignment, or fluid pathway leaks on pump applications.
- Corrosion and Load Resistance — Built to withstand the vibration loads, moisture exposure, and thermal cycling common to trash pump and light tower service environments.
A stud is a headless threaded fastener that remains permanently seated in one component — such as a pump housing or equipment frame — while a nut is threaded onto the exposed end to clamp a mating part in place. In trash pump applications, studs are commonly used to secure pump covers, volute housings, and engine mounting interfaces where repeated service access demands a stable, fixed thread anchor. In light tower frames and enclosures, studs perform a similar role at panel and structural attachment points. When a stud stretches, strips, or corrodes, it can no longer maintain the clamping force needed to keep mating surfaces sealed or aligned — making prompt replacement with a correctly specified part essential to continued safe and efficient operation.
Part Details
| Part Number | 5000117816 |
|---|---|
| Old Part Number | 0117816 |
| Brand | Wacker Neuson |
| Part Type | Genuine OEM |
| Description | Stud |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| PT3H Pump | PT3H | 5000009100, 5000009103, 5000009242, 5100014963, 5100014964 |
| PT2H Pump | PT2H | 5000009094, 5000009097, 5000009239, 5200007593 |
| 75mm/3in Centrifugal Trash Pum p | PT3A | 5000009098, 5000009101, 5000009240, 5000620800, 5100058535, 5100058536 |
| PT2A Pump | PT2A | 5000009092, 5000009095, 5000009237, 5100058524, 5100058525 |
| PT3 Pump | PT3 | 5000009321, 5000620726, 5000009322, 5000009323 |
| PT2 Pump | PT2 | 5000009318, 5000620725, 5000009319, 5000009320 |
| LTN6K-V S, KUBOTA, 120/240V | LTN6K-V S | 5200018537, 5200018550, 5200018553, 5200023197 |
| LTW20Z3-V S LIGHT TOWER, COLD WEATHER, T4i | LTW20Z3-V S | 5200018566, 5200018558, 5200018562, 5200023196, 5100015094, 5100022126 |
| LTN8K-V LIGHT TOWER,60HZ | LTN8K-V | 5200002727, 5200002728 |
| LTW20Z1-V S LIGHT TOWER, COLD WEATHER, T4i | LTW20Z1-V S | 5200018565, 5200018557, 5200018561, 5200024875, 5200023195, 5100015093, 5100022125 |
| LTN6L-V LIGHT TOWER,50HZ | LTN6L-V | 5200002720, 5200002721, 5200002716, 5200002717, 5200002718, 5200002719, 5200017102, 5200019283 |
| LTN6K-V LIGHT TOWER,60HZ | LTN6K-V | 5200002722, 5200002726 |
| LTW6K-V S Light Tower, Cold Weather T4 | LTW6K-V S | 5200018563, 5200018555, 5200018559, 5200024873 |
| LTW8K-V S Light Tower, Cold Weather T4 | LTW8K-V S | 5200018564, 5200018556, 5200023194, 5200018560, 5200024874, 5100015095, 5100022084 |
| Light Tower | LTW20Z3-V | 5200012881, 5200012885, 5200012867, 5200022694 |
| Light Tower | LTW6K-V | 5200012864, 5200012868, 5200012882 |
| Light Tower | LTW8K-V | 5200012869, 5200012883, 5200012865 |
| Light Tower | LTW20Z1-V | 5200012880, 5200012884, 5200012866 |
| LTN6L-V S, KOHLER (LOMBARDINI) | LTN6L-V S | 5200018536, 5200018539, 5200018573, 5200018552, 5200023687, 5200023688, 5200023689, 5200018576 |
| LTN8K-V S, KUBOTA, 120/240V | LTN8K-V S | 5200018538, 5200018551, 5200018554, 5200023198 |
| LTN6LE-V 50 Hz CE 230 V LED | LTN6LE-V | 5200019285, 5200019140 |
| 50mm/2in Centrifugal Trash Pum p | PT2V | 5000009238, 5000009093, 5000009096 |
| 75mm/3in Centrifugal Trash Pum p | PT3V | 5000009102, 5000009241 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
