The Wacker Neuson Carburetor Adapter is a genuine OEM component designed for the BS50-2, BS60-2, BS70-2, and BS65-V series vibratory rammers. As a direct OEM replacement, the is manufactured to the same specifications as the original part, ensuring it seats and seals correctly between the carburetor and the engine intake. This adapter is confirmed to fit a wide range of BS-series rammer configurations, including standard, oil-injected, high-altitude, and variable-speed variants across both domestic and EU models. When you match by part number, you eliminate guesswork and get the right component the first time.
Key Features
- OEM-Spec Sealing Surfaces — Manufactured to original dimensional tolerances, ensuring an airtight seat between the carburetor and intake port with no air leaks that could affect fuel mixture.
- Drop-In Replacement — Matches the original mounting bolt pattern and port diameter of BS-series rammer engines, installing directly without modification to the carb or airbox.
- Broad BS-Series Compatibility — Fits BS50-2, BS50-2i, BS60-2, BS60-2i, BS65-V, BS70-2, and BS70-2i rammers, covering standard, oil-injected, high-altitude, and variable-speed configurations.
- Protects Engine Tune and Idle Stability — A worn or cracked adapter allows unmetered air into the intake, causing rough idle, poor throttle response, and hard starting on the rammer.
- Fuel System Safety — Correct adapter fitment maintains the integrity of the fuel-air circuit, reducing the risk of fuel vapor exposure from intake leaks near a hot engine.
The carburetor adapter is the interface fitting that connects the carburetor body to the engine's intake port on a vibratory rammer. It creates a sealed passage so that all air entering the engine passes through the carburetor's metering circuit, keeping the fuel-air mixture consistent across the RPM range. When this adapter cracks, hardens, or loses its seal — common on equipment exposed to heat cycling and vibration — the engine draws in unmetered air, leaning out the mixture and causing symptoms like erratic idling, loss of power, and difficulty starting. Replacing a degraded adapter restores correct carburetion and protects the engine from the long-term wear associated with running lean.
Part Details
| Part Number | 5000119711 |
|---|---|
| Old Part Number | 0119711 |
| Brand | Wacker Neuson |
| Part Type | Genuine OEM |
| Description | Carburetor Adapter |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| Oil-injected Rammer with 280mm /11in Shoe | BS60-2i EU | 5000009419, 5000009420 |
| Oil-injected Rammer with 280mm /11in | BS70-2i EU | 5000009428, 5000009426 |
| Vibratory Rammer with 280mm/11 in Shoe | BS60-2 EU | 5000009417, 5000009421, 5000009418 |
| BS60-2i | BS60-2i | 5000009339, 5000009393 |
| Oil-injected Rammer with 280mm /11in Shoe | BS50-2i EU | 5000009414, 5000009412, 5000009416 |
| Vibratory Rammer with 280mm/11 in Shoe | BS70-2 EU | 5000009424, 5000009427, 5000009425 |
| BS50-2i | BS50-2i | 5000009338, 5000009473, 5000009383, 5000620026, 5000009332 |
| 330mm/13in Shoe, Oil-injected Rammer | BS70-2i | 5000009341, 5000009401 |
| Variable Speed Rammer with 280 mm/11in Shoe | BS65-V EU | 5000009423 |
| Vibratory Rammer, 280mm/11in S hoe | BS500 | 5000009075 |
| 250mm/10in Shoe, Vibratory Ram mer | BS50-2 | 5000009384, 5000620025, 5000620048, 5000009380, 5000009382 |
| Vibratory Rammer with 280mm/11 in Shoe | BS50-2 EU | 5000009410, 5000009411, 5000009413 |
| 280mm/11in Shoe, Vibratory Ram mer | BS60-2 | 5000009388, 5000009391 |
| 280mm/11in Shoe, Vibratory Ram mer | BS70-2 | 5000009397, 5000009399 |
| 280mm/11in Shoe, Variable Spee d Rammer | BS65-V | 5000009396 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
