The Wacker Neuson Electrical Connector is a genuine OEM component designed for the IREN38, IREN45, and IRSEN series internal concrete vibrators. As a direct factory replacement, this connector restores the original electrical interface between the vibrator head and the power supply, ensuring consistent signal and power transfer across the full range of compatible configurations. Fitment covers a broad spread of IREN and IRSEN variants including 6m, 8m, and 10m cable lengths, GV versions, and 240V models such as the IREN 45/048/240 and IREN 38/048/240.
Key Features
- Genuine OEM Electrical Integrity — Manufactured to the original contact and housing specification, maintaining the correct mating fit and electrical conductivity required for internal vibrator operation.
- Direct-Plug Replacement — Connects using the factory connector interface, allowing straightforward swap-out without splicing or adapter hardware.
- Wide Series Compatibility — Fits IREN38 and IREN45 models across standard, GV, 6m, 8m, and 10m cable configurations, plus IRSEN38 and IRSEN45 variants.
- Sustained Vibrator Output — A sound electrical connection keeps the vibrator head operating at full frequency, ensuring proper concrete consolidation and eliminating voids in the pour.
- Electrical Safety Compliance — Using the correct OEM connector preserves the grounding path and insulation integrity of the vibrator circuit, which is critical in wet concrete environments.
The electrical connector on an internal concrete vibrator serves as the critical link between the power converter or drive unit and the vibrator head itself. It carries both power and control signals down the cable to the eccentric motor that generates the high-frequency vibration used to consolidate fresh concrete. A damaged, corroded, or poorly fitting connector can cause intermittent power loss, reduced vibration output, or a complete failure of the head to run — any of which will compromise concrete quality and slow the pour. Replacing a worn connector with the correct OEM part restores a clean, stable electrical path and returns the vibrator to full working performance.
Part Details
| Part Number | 5000124598 |
|---|---|
| Old Part Number | 0124598 |
| Brand | Wacker Neuson |
| Part Type | Genuine OEM |
| Description | Electrical Connector |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| IREN38/042/5 | IREN38/042/5 | 5000007895 |
| IREN45/042/5 | IREN45/042/5 | 5000007896 |
| IREN38/042/5GV | IREN38/042/5GV | 5000008433 |
| IREN45/042/5GV | IREN45/042/5GV | 5000008434 |
| Internal Vib. IREN 45 - 6m | IREN 45 6m | 5000008510 |
| Internal Vib. IREN 45 - 8m | IREN 45 8m | 5000008511 |
| IREN45/042/10 | IREN45/042/10 | 5000008512 |
| Internal Vib. IREN 38 -6m | IREN 38 6m | 5000008513 |
| Internal Vib. IREN 38 -8m | IREN 38 8m | 5000008514 |
| IREN38/042/10 | IREN38/042/10 | 5000008515 |
| Internal Vib. IREN 45/048/240 | IREN 45/048/240 | 5000008592 |
| Int. Vib. w. Conv. IREN 40/048/240 - 6m | IREN 40/048/240 | 5000610221 |
| IRSEN45/042 | IRSEN45/042 | 5000008597 |
| IRSEN38/042 | IRSEN38/042 | 5000008598 |
| Internal Vib. IRSEN 45 GV | IRSEN 45 GV | 5000008644 |
| Internal Vib. IRSEN 38 GV | IRSEN 38 GV | 5000008645 |
| Internal Vibrator IREN 45 | IREN 45 | 5000008474 |
| Internal Vib. IREN 38/048/240 | IREN 38/048/240 | 5000008593 |
| Internal Vib. IREN 45/6m GV | IREN 45 6m GV | 5000008664 |
| Internal Vib. IREN 38/6m GV | IREN 38 6m GV | 5000008665 |
| Internal Vib. IREN 45/8m GV | IREN 45 8m GV | 5000008670 |
| Internal Vib. IREN 38/8m GV | IREN 38 8m GV | 5000008671 |
| Internal Vib. IREN 45/10m GV | IREN 45 10m GV | 5000008675 |
| Internal Vib. IREN 38/10m GV | IREN 38 10m GV | 5000008676 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
