The Wacker Neuson Seal is a genuine OEM component designed for a wide range of Wacker Neuson equipment, including DPU and DPS series reversible vibratory plate compactors, PT2H and PT3H self-priming centrifugal trash pumps, HSH350 hydronic surface heaters, and E1100 ground heaters. As a direct OEM replacement, the meets Wacker Neuson's original engineering specifications, ensuring a drop-in fit with no guesswork. This seal is stocked to support a broad cross-section of job site equipment, making it a smart part to have on hand for fleet operators and service technicians alike.
Key Features
- Genuine OEM Material Integrity — Manufactured to Wacker Neuson's original compound and dimensional specifications, ensuring the seal maintains proper compression and does not degrade prematurely under hydraulic or fluid pressure.
- Direct-Fit Replacement — Engineered to seat correctly in the original groove or bore without trimming or modification, supporting a clean, leak-free installation the first time.
- Broad Equipment Compatibility — Fits DPU 2440H through DPU 3760H reversible plates, DPS 1850H and DPS 2050H single-direction plates, PT2H and PT3H trash pumps, HSH350 hydronic surface heaters, and E1100 ground heaters.
- Fluid Containment Performance — A correctly seated seal prevents fluid bypass and contamination ingress, keeping pumps priming efficiently, compactor hydraulic circuits pressurized, and heater systems operating without fluid loss.
- Fuel and Fluid System Safety — A failed or degraded seal can allow fuel, hydraulic fluid, or coolant to leak into areas where ignition or contamination risk exists; replacing with a genuine OEM seal maintains system integrity and safe operation.
A seal serves as a precision barrier between two mating surfaces or around a rotating shaft, preventing fluid or pressure from escaping the system while also blocking contaminants from entering. In compaction equipment like the DPU and DPS plate series, seals are critical to maintaining hydraulic circuit pressure for the exciter mechanism; a worn seal causes pressure drop, reduced compaction force, and potential hydraulic fluid loss. In trash pumps such as the PT2H and PT3H, seals protect the impeller and pump housing from water and debris ingress, and failure leads to loss of prime and reduced flow. In heating equipment like the HSH350 and E1100, seals maintain fluid circuit integrity — when a seal fails, fluid leaks compromise both heater output and safe operation.
Part Details
| Part Number | 5000129013 |
|---|---|
| Old Part Number | 0129013 |
| Brand | Wacker Neuson |
| Part Type | Genuine OEM |
| Description | Seal |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| Hydronic Surface Heater | HSH350 | 5000620254, 5200001677 |
| PT3H Pump | PT3H | 5000009100, 5000009103, 5000009242, 5100014963, 5100014964 |
| PT2H Pump | PT2H | 5000009094, 5000009097, 5000009239 |
| E1100 GROUND HEATER | E1100 | 5000620172, 5200001676 |
| DPU2540H | DPU 2540H | 5000610035, 5000008755 |
| DPU 2550H | DPU 2550H | 5000610036, 5000008756 |
| DPU 2560H | DPU 2560H | 5000610037, 5000008757 |
| DPU 2560H-TS | DPU 2560H-TS | 5000610038, 5000610005 |
| DPU 3050H | DPU 3050H | 5000610039, 5000008759 |
| DPU 3060H | DPU 3060H | 5000610040, 5000008760 |
| DPU 3070H | DPU 3070H | 5000610041, 5000008908 |
| DPU 3060H-TS | DPU 3060H-TS | 5000610042, 5000610006 |
| DPU 3050HE | DPU 3050HE | 5000610298 |
| DPU 3060HE-TS | DPU 3060HE-TS | 5000610302 |
| DPS1850H Asphalt | DPS1850H Asphalt | 5000610033, 5000008925 |
| DPS1850H Basic | DPS1850H Basic | 5000610032, 5000008924 |
| DPS1850H Vario | DPS1850H Vario | 5000610034, 5000008926 |
| DPU 3050H US | DPU 3050H US | 5100000310 |
| DPU 3750Hts | DPU 3750Hts | 5000610321 |
| DPU 3750Hets | DPU 3750Hets | 5000610322 |
| DPU 3760Hts | DPU 3760Hts | 5000610358 |
| DPU 3760Hets | DPU 3760Hets | 5000610359 |
| DPU 3750Hts US | DPU 3750Hts US | 5100000311 |
| Reversible Vibratory Plate, 24 kN, 40cm/16in | DPU 2440H | 5000007870 |
| Single Direction Vibratory Pla te, 18kN, 50cm/20in | DPS 1850H | 5000008397, 5000008750 |
| Vibration plate DPU 2450H | DPU 2450H | 5000008746 |
| Vibration Plate | DPU 3050Hw US Army | 5100009915 |
| DPS2050H | DPS2050H | 5100061223 |
| DPS2050Hw | DPS2050Hw | 5100061224 |
| DPS3060Hv | DPS3060Hv | 5100016643 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
