The Wacker Neuson Cheese Head Screw is a genuine OEM fastener designed for use across multiple Wacker Neuson equipment families, including the PT2H centrifugal trash pump, DPU 2440H, DPU 2450H, DPU 2540H, DPU 2550H, and DPU 2560H reversible vibratory plate compactors, DPS 1850H, DPS 2050H, and DPS 3060Hv single-direction vibratory plate compactors, and the DS70 vibratory rammer. As a genuine Wacker Neuson OEM part, the is manufactured to the exact specifications of the original hardware used on the production line — ensuring correct thread engagement, head geometry, and torque retention in service. This screw ships as a direct replacement and requires no modification to fit the positions it was designed for across this broad range of compaction and pumping equipment.
Key Features
- Correct Thread and Head Geometry: — Machined to OEM specification with the precise cheese head profile, thread pitch, and shank dimensions needed for proper seating and clamp load in the intended fastener positions.
- Genuine Wacker Neuson OEM Part: — Sourced directly from Wacker Neuson, this is the same screw installed at the factory — not a generic substitute — so fitment and performance are assured.
- Wide Cross-Family Compatibility: — A single part number covering the PT2H trash pump, DPU and DPS vibratory plate compactor series, DPS 3060Hv, DPS 2050H variants, and the DS70 diesel rammer.
- Maintains Fastener Integrity Under Vibration: — Equipment in the DPU, DPS, and DS families operates under continuous high-frequency vibration; a correctly dimensioned OEM screw retains torque and resists backing out during operation.
- Drop-In Service Replacement: — Installs directly into the existing threaded bore with no chasing, tapping, or adapter hardware required, making field and workshop replacement fast and straightforward.
A cheese head screw is a cylindrical-head fastener with a flat top and straight sides — a profile that provides a large bearing surface and is commonly used in recessed or close-tolerance mounting locations where a low-profile but high-clamping fastener is needed. In equipment like vibratory plate compactors and trash pumps, fasteners in these positions are subjected to significant vibration and mechanical stress; using a screw with the correct head geometry and thread specification ensures that components stay properly clamped and aligned during operation. A worn, stripped, or incorrect-specification screw in one of these locations can allow panels, guards, or internal components to shift, leading to accelerated wear or operational faults in the surrounding assembly.
Part Details
| Part Number | 5000129519 |
|---|---|
| Old Part Number | 0129519 |
| Brand | Wacker Neuson |
| Part Type | Genuine OEM |
| Description | Cheese Head Screw |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| PT2H Pump | PT2H | 5000009094, 5000009097, 5000009239 |
| DPU2540H | DPU 2540H | 5000610035, 5000008755 |
| DPU 2550H | DPU 2550H | 5000610036, 5000008756 |
| DPU 2560H | DPU 2560H | 5000610037, 5000008757 |
| DPU 2560H-TS | DPU 2560H-TS | 5000610038, 5000610005 |
| DS70H Vibratory Rammer, 13" Plastic Shoe EPA | DS70 | 5200010976 |
| DPS1850H Asphalt | DPS1850H Asphalt | 5000610033, 5000008925 |
| DPS1850H Basic | DPS1850H Basic | 5000610032, 5000008924 |
| DPS1850H Vario | DPS1850H Vario | 5000610034, 5000008926 |
| Reversible Vibratory Plate, 24 kN, 40cm/16in | DPU 2440H | 5000007870 |
| Single Direction Vibratory Pla te, 18kN, 50cm/20in | DPS 1850H | 5000008397, 5000008750 |
| Vibration plate DPU 2450H | DPU 2450H | 5000008746 |
| DPS2050H | DPS2050H | 5100061223 |
| DPS2050Hw | DPS2050Hw | 5100061224 |
| DPS3060Hv | DPS3060Hv | 5100016643 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
