The Wacker Neuson Switch is a genuine OEM Switch designed for a wide range of Wacker Neuson equipment, including WP-series single-direction vibratory plate compactors, BFS-series floor saws, PDT and PDI diaphragm trash pumps, and PG-series dewatering pumps. Sourced directly from Wacker Neuson, this switch carries the same part number and specifications as the original component installed at the factory. Compatible models include the WP1540, WP1550, WP1540W, WP1550W, BFS 614B, BFS 914, BFS 935, BFS 1318AB, BFS 1345, PDT2, PDT3, PDI2, PDI3, PG2, and PG3 series, among others. When your original switch fails, this direct replacement gets your machine back in operation without guesswork.
Key Features
- Genuine OEM Electrical Specification — Manufactured to Wacker Neuson's original circuit and switching specifications, ensuring correct make/break function and voltage compatibility across all listed platforms.
- Direct Plug-In Replacement — Uses the same connector configuration and mounting footprint as the original, allowing straightforward installation without rewiring or bracket modification.
- Broad Cross-Family Fitment — A single part number covering WP vibratory plates, BFS floor saws, PDT/PDI diaphragm pumps, and PG dewatering pumps — confirm your model number before ordering.
- Restores Reliable On/Off Control — A worn or failed switch can prevent startup, cause intermittent shutdowns, or leave the machine running when it shouldn't; replacing it restores proper operator control.
- Electrical Safety Integrity — Correct switch function is critical for safe equipment operation; using an OEM-spec switch maintains the designed electrical safety margins for the operator and machine.
A switch is the primary operator control point that completes or interrupts the electrical circuit to start, stop, or control a machine's engine or motor. When functioning correctly, it gives the operator immediate, predictable command over the equipment. Over time, internal contacts can corrode, arc, or wear, leading to symptoms such as failure to start, unexpected shutdowns, or a switch that no longer clicks into position and holds. Replacing a faulty switch with a genuine OEM part restores the designed circuit integrity and ensures the machine responds exactly as intended every time.
Part Details
| Part Number | 5000129974 |
|---|---|
| Old Part Number | 0129974 |
| Brand | Wacker Neuson |
| Part Type | Genuine OEM |
| Description | Switch |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| 50mm/2in Diaphragm Trash Pump | PDT2 | 5000009494, 5000620770 |
| 75mm/3in Diaphragm Trash Pumps | PDT3 | 5000009495, 5000620774 |
| PG2 Dewatering Pump | PG2 | 5000009496, 5000009497 |
| PG3 Dewatering Pump | PG3 | 5000009498, 5000009499 |
| 280/11in Shoe, Vibratory Ramme r | MS54 | 5200008223 |
| WP1540W VIBROPLATE | WP1540W | 5000009326, 5000009547, 5000630066 |
| WP1550W VIBROPLATE | WP1550W | 5000009324, 5000009548, 5000630064 |
| WP1550 VIBROPLATE | WP1550 | 5000009325, 5000630065 |
| WP1540 VIBROPLATE | WP1540 | 5000009327, 5000630067 |
| Value Vibratory Plate | VP2050I | 5000009541 |
| Basic floor saw, 450mm/18in | BFS 1345AB | 5000008764 |
| Basic floor saw, ø 450mm/18in | BFS 1345B | 5000008909 |
| BFS 935A SAW,BASIC | BFS 935AB | 5000008910 |
| BFS 935 SAW,BASIC | BFS 935B | 5000008911 |
| BFS 1318AB SAW | BFS 1318AB | 5000610091 |
| BFS 914AB SAW | BFS 914AB | 5000610092 |
| BFS 914B SAW | BFS 914B | 5000610093 |
| Floor Saws | BFS 614B | 5000009526 |
| 50mm/2in Diaphragm Trash Pump | PDI2 | 5000009489 |
| 75mm/3in Diaphragm Trash Pump | PDI3 | 5000009491, 5000009492 |
| A1500-POWER UNIT,HONDA,35CC | A1500/035 ISO | 5000610324 |
| A1500 POWER UNIT, HONDA | A1500/035 ANSI | 5000610339 |
| Floor Saw | BFS 914A | 5100004002 |
| Floor Saw | BFS 914W | 5100004003 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
