The Wacker Neuson is a genuine OEM Toggle Switch designed for the RT and RTL/RTK series remote-controlled vibratory trench rollers. This switch is sourced directly from Wacker Neuson, ensuring it meets the original electrical specifications of the control system it serves. Fitment covers a broad range of SC2 and SC3 generation machines, including the RT56-SC, RT82-SC, RT82-SC2, RTLx-SC3, RTKx-SC3, RTx-SC2, and HTC15 trench rollers. Verifying your machine number against the fitment list before ordering is always recommended for multi-generation platforms like these.
Key Features
- Correct Electrical Specification: — Manufactured to the original circuit rating and actuation spec, so the switch operates within the control system's designed parameters without overloading or underperforming.
- Direct Connector Match: — Designed to install into the existing panel or housing cutout using the original mounting hardware, with no reworking of the wiring harness required.
- Broad SC2 and SC3 Generation Coverage: — Fits RT56-SC, RT82-SC, RT82-SC2, RTLx-SC3, RTKx-SC3, and RTx-SC2 models across multiple production runs, including Compatec-equipped variants.
- Genuine OEM Part: — Supplied by Wacker Neuson as original equipment, so you receive the same component installed at the factory — not a generic substitute selected by approximate dimensions alone.
- Operator Control Integrity: — A failed or intermittent toggle switch can cause unpredictable machine response or prevent the roller from actuating key functions; replacing it restores consistent, predictable operator control.
- Electrical Safety Compliance: — As a control-circuit component on remote-operated compaction equipment, using the correct OEM-rated switch helps maintain the machine's designed safety response characteristics.
A toggle switch in a trench roller's control panel routes operator input to the machine's electrical system — activating functions such as vibration, direction control, or auxiliary circuits depending on its position in the circuit. When a toggle switch wears out or fails internally, the affected function may become unresponsive, intermittent, or stuck in one state, which can interrupt work or create unsafe operating conditions on a remote-controlled machine. Replacing a faulty switch with the correct OEM part restores clean, reliable signal continuity between the operator and the machine's control electronics.
Part Details
| Part Number | 5000150110 |
|---|---|
| Old Part Number | 0150110 |
| Brand | Wacker Neuson |
| Part Type | Genuine OEM |
| Description | Toggle Switch |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| Vibratory Trench Roller | RT82-SC2 | 5000620530, 5000620293, 5000620367, 5000620525, 5000620528, 5000620529, 5000620526, 5000620527 |
| Vibratory Trench Roller | RT82-SC2 EU | 5000620845, 5200003107 |
| Vibratory Trench Roller | RT56-SC2 | 5000620294, 5000620368 |
| Vibratory Trench Roller | RT56-SC2 EU | 5000620844 |
| Vibratory Trench Roller | RT82-SC | 5000009025, 5000620365, 5000620324, 5000620353, 5000620480, 5000620481, 5000620482 |
| Vibratory Trench Roller | RT56-SC | 5000009026, 5000620366 |
| RTLx-SC3 TRENCH ROLLER,GRN | RTLx-SC3 | 5200019251, 5200019250, 5200019254, 5200019252, 5100018515, 5100018516, 5200019253, 5100038346, 5100045091, 5100052332, 5100052269 |
| RTL82-SC3 ROLLER,SMOOTH DRUM | RTL82-SC3 | 5200019234, 5200019238, 5200019232, 5200019233, 5200019235, 5200019236, 5200019237, 5200019239, 5200022541 |
| RTKx-SC3 Trench Roller | RTK82-SC3 | 5200019257, 5200019256, 5200019255 |
| RTKx-SC3 TRENCH ROLLER,GRN | RTKx-SC3 | 5200019258, 5200019259, 5100018517, 5100018518, 5100034371, 5100037397, 5100039613, 5100052333, 5100052334, 5100052335, 5100052336, 5100052337 |
| Trench Roller | RTx-SC2 EU | 5100028378, 5200008540, 5100052330 |
| RTx-SC2 TRENCH ROLLER | RTx-SC2 | 5200008538, 5200008539, 5200018044, 5200018329 |
| Trench Roller | HTC15 | 5100065571 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
