Wacker Neuson 5000150115 Switch-Key Start, 2-Pole, Packard Terminal
Wacker Neuson

Wacker Neuson 5000150115 Switch-Key Start, 2-Pole, Packard Terminal

$76.21
(No reviews yet) Write a Review
SKU:
5000150115-Wacker Neuson
Adding... The item has been added

The Wacker Neuson Switch-Key Start, 2-Pole, Packard Terminal is a genuine OEM ignition switch designed for RT82-SC2, RT56-SC2, RT82-SC, RT56-SC, RTLx-SC3, RTKx-SC3, RTL82-SC3, RTx-SC2, and HTC15 series Vibratory Trench Rollers. As a direct Wacker Neuson OEM component, the is manufactured to the same specification as the original part fitted at the factory, ensuring correct terminal engagement and reliable electrical connection right out of the box. This switch covers an extensive range of SC2 and SC3 generation trench roller configurations, including Compatec-equipped variants across multiple market regions.

Key Features

  • OEM-Matched Electrical Specification — Built to Wacker Neuson's original contact resistance and switching spec, so the ignition circuit operates exactly as designed with no risk of voltage drop or intermittent starting.
  • Packard Terminal Connector — The 2-pole Packard terminal configuration matches the factory harness connector directly, allowing a straightforward plug-in replacement with no terminal adapters or wiring modifications.
  • Broad SC2 and SC3 Generation Coverage — Confirmed fitment across RT82-SC2, RT56-SC2, RT82-SC, RT56-SC, RTLx-SC3, RTKx-SC3, RTL82-SC3, RTx-SC2, and HTC15 Trench Rollers, including EU-spec and Compatec-equipped machines.
  • Fail-Safe Ignition Control — A fully functioning key start switch is the operator's primary point of machine control; a worn or faulty switch can cause no-start conditions, unintended shutdowns, or inability to cut power in an emergency stop situation.
  • Electrical Safety Integrity — On remote-controlled compaction equipment, a correctly rated OEM ignition switch ensures the machine powers up and shuts down through a verified, properly insulated circuit — reducing the risk of uncontrolled operation or electrical fault.

The key start switch is the primary ignition control on Wacker Neuson vibratory trench rollers, responsible for completing or interrupting the electrical circuit that powers the engine and machine systems. When the key is turned, the switch sends a signal through the Packard terminal connection to engage starting and run functions — or to cut all power when the machine needs to be shut down. A faulty or worn switch can result in intermittent starting, failure to shut down reliably, or a complete no-start condition, making prompt replacement essential for safe and productive compaction work.

Part Details

Part Number5000150115
Old Part Number0150115
BrandWacker Neuson
Part TypeGenuine OEM
DescriptionSwitch-Key Start, 2-Pole, Packard Terminal

Compatibility & Fitment

Name Model Machine Number
Vibratory Trench Roller RT82-SC2 5000620530, 5000620293, 5000620367, 5000620525, 5000620528, 5000620529, 5000620526, 5000620527
Vibratory Trench Roller RT82-SC2 EU 5000620845, 5200003107
Vibratory Trench Roller RT56-SC2 5000620294, 5000620368
Vibratory Trench Roller RT56-SC2 EU 5000620844
Vibratory Trench Roller RT82-SC 5000009025, 5000620365, 5000620324, 5000620353, 5000620480, 5000620481, 5000620482
Vibratory Trench Roller RT56-SC 5000009026, 5000620366
RTLx-SC3 TRENCH ROLLER,GRN RTLx-SC3 5200019251, 5200019250, 5200019254, 5200019252, 5100018515, 5100018516, 5200019253, 5100038346, 5100045091, 5100052332, 5100052269
RTL82-SC3 ROLLER,SMOOTH DRUM RTL82-SC3 5200019234, 5200019238, 5200019232, 5200019233, 5200019235, 5200019236, 5200019237, 5200019239, 5200022541
RTKx-SC3 Trench Roller RTK82-SC3 5200019257, 5200019256, 5200019255
RTKx-SC3 TRENCH ROLLER,GRN RTKx-SC3 5200019258, 5200019259, 5100018517, 5100018518, 5100034371, 5100037397, 5100039613, 5100052333, 5100052334, 5100052335, 5100052336, 5100052337
Trench Roller RTx-SC2 EU 5100028378, 5200008540, 5100052330
RTx-SC2 TRENCH ROLLER RTx-SC2 5200008538, 5200008539, 5200018044, 5200018329
Trench Roller HTC15 5100065571

Verify Before You Order

Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.

Why Buy From DHS Equipment

Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.

Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.