Wacker Neuson 5000150278 O-Ring, 1.50Idx.070, 70-Dur, Nitr
Wacker Neuson

Wacker Neuson 5000150278 O-Ring, 1.50Idx.070, 70-Dur, Nitr

$1.25
(No reviews yet) Write a Review
SKU:
5000150278-Wacker Neuson
Adding... The item has been added

The Wacker Neuson is a genuine OEM O-Ring, 1.50Idx.070, 70-Dur, Nitr designed for the BS50-2i, BS60-2i, BS70-2i, BS500-oi, BS600-oi, and BS700-oi series oil-injected vibratory rammers. As a direct factory replacement, this nitrile O-ring meets the exact dimensional and material specifications Wacker Neuson engineers specified for these machines. Genuine OEM sourcing means you receive the correct durometer rating and inner diameter the first time, with no guesswork on fitment across this broad rammer family. Whether you are servicing a standard shoe configuration or a high-altitude variant, part number covers an extensive range of BS-series rammer assemblies.

Key Features

  • Nitrile Compound at Correct Durometer — 70-durometer nitrile construction delivers the compression resistance and oil compatibility required for oil-injected rammer sealing applications.
  • Exact 1.50 In. ID Profile — Manufactured to the specified 1.50-inch inner diameter and .070-inch cross-section, ensuring the ring seats flush in its groove without distortion or gap.
  • Genuine OEM Part — Sourced directly from Wacker Neuson, this O-ring carries the same part number and material specification used on the original production line.
  • Broad BS-Series Rammer Coverage — Confirmed fit across BS50-2i, BS50-2plus, BS60-2i, BS60-2plus, BS70-2i, BS70-2plus, BS500-oi, BS600-oi, and BS700-oi models, including standard, high-altitude, and EU variants.
  • Prevents Oil Leakage and Lubrication Loss — A degraded or incorrectly sized O-ring allows oil to escape the injection system, starving internal components of lubrication and accelerating wear inside the rammer.

An O-ring is a circular elastomeric seal that closes the gap between two mating surfaces or ports, preventing fluid or gas from passing through under pressure. In Wacker Neuson oil-injected vibratory rammers, O-rings like the 5000150278 are used to maintain a leak-free seal within the oil-injection and fuel delivery circuits, keeping lubricant precisely where the engine needs it. When an O-ring hardens, cracks, or is compressed beyond its rated profile, the seal fails — allowing oil to weep past the joint, which can lead to dry running, overheating, and premature engine wear if left unaddressed.

Part Details

Part Number5000150278
Old Part Number0150278
BrandWacker Neuson
Part TypeGenuine OEM
DescriptionO-Ring, 1.50Idx.070, 70-Dur, Nitr

Compatibility & Fitment

Name Model Machine Number
BS50-2i BS50-2i 5000009338, 5000009383, 5000620955, 5000009473, 5000620026, 5000620611, 5000009332, 5200000642, 5200000643, 5200000657, 5200000658, 5200000659, 5200000660, 5200000661, 5200000678, 5200000687, 5200011099, 5200003696, 5100014907, 5100016648, 5100016649, 5100016650, 5200025428, 5200025429, 5100028037
BS60-2i BS60-2i 5000009339, 5000009393, 5000620906, 5000620613, 5000620614, 5200000645, 5200000646, 5200000664, 5200000665, 5200000682, 5200000689, 5200000690, 5100014908, 5100028038
Oil-injected Rammer with 250mm /10in Shoe BS50-2i EU 5000009412, 5000009414, 5000009416
330mm/13in Shoe, Oil-injected Rammer BS70-2i 5000009341, 5000009401, 5200000649, 5200000650, 5200000672, 5200000673, 5100014909, 5100016653
Oil-injected Rammer with 280mm /11in Shoe BS60-2i EU 5000009419, 5000009420
Oil-injected Rammer with 330mm /13in Shoe BS70-2i EU 5000009426, 5000009428
Oil-injected Rammer, 280mm/11i n Shoe BS600-oi 5000009166, 5000009262
Oil-injected Rammer, 280mm/11i n Shoe BS500-oi 5000009165, 5000009343
Oil-injected Rammer, 330mm/13i n Shoe BS700-oi 5000009167, 5000009328
BS50-2plus 11in US BS50-2plus 11in US 5100030594
BS50-2PLUS 11IN HA US BS50-2plus 11in ha US 5100030595
BS50-2plus 11in BS50-2plus 11in 5100030596
BS50-2plus 6in (24mm) BS50-2plus 6in (24mm) 5100030597
BS60-2plus 11in US BS60-2plus 11in US 5100030602
BS60-2PLUS 11IN HA US BS60-2plus 11in ha US 5100030603
BS60-2plus 11in BS60-2plus 11in 5100030604
BS60-2plus 11in CN BS60-2plus 11in CN 5100039660
BS70-2plus 11in US BS70-2plus 11in US 5100030608
BS70-2plus 11in BS70-2plus 11in 5100030609

Verify Before You Order

Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.

Why Buy From DHS Equipment

Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.

Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.