The Wacker Neuson is a genuine OEM Oil Lifter Plate designed for the PS2 and PS3 series submersible pumps, covering a wide range of voltage and discharge configurations including the PS2-1503, PS3-1503, PS2-2203, PS3-2203, PSW3-1500, PSA2-1503L, PSC series, and related variants. As a direct OEM part sourced through Wacker Neuson's authorized supply chain, the is manufactured to the exact tolerances required for proper lubrication management inside the pump motor housing. This part is confirmed compatible across an extensive range of PS-family submersible pump models operating on 220V, 440V, 575V, and 400V/50Hz power supplies, making it one of the most broadly applicable service components in the PS pump lineup. When this plate is worn or damaged, proper oil distribution within the pump is compromised, which can lead to accelerated bearing wear and motor failure.
Key Features
- Genuine OEM Lubrication Integrity — Manufactured to Wacker Neuson's exacting tolerances to ensure the oil lifter functions correctly within the sealed motor chamber, maintaining consistent lubricant distribution to internal rotating components.
- Drop-In Installation — Designed to seat directly into the motor housing of compatible PS-series pumps with no machining or modification to mating surfaces required.
- Broad PS-Series Compatibility — Fits a wide range of PS2 and PS3 submersible pump models across multiple discharge sizes (50mm/2 in and 75mm/3 in) and voltage configurations, including 220V, 440V, 575V, and 400V/50Hz variants.
- Protects Bearings and Motor Windings — A correctly functioning oil lifter plate keeps internal bearings lubricated under load, helping prevent the overheating and premature motor failure that a worn or cracked plate can cause.
- Verified Part Number — Order with confidence using Wacker Neuson part number 5000150518, cross-referenced across the full PS2 and PS3 model range for accuracy.
The oil lifter plate sits inside the motor section of a submersible pump and is responsible for drawing lubricating oil up to the motor's internal bearings as the shaft rotates. Without proper oil distribution, the bearings run dry under load, generating heat that can quickly damage the motor windings and seals. When this plate cracks, warps, or fails to seat correctly, the pump may continue to run briefly before bearing failure and motor burnout follow — making it a small but critical component in the pump's long-term serviceability.
Part Details
| Part Number | 5000150518 |
|---|---|
| Old Part Number | 0150518 |
| Brand | Wacker Neuson |
| Part Type | Genuine OEM |
| Description | Oil Lifter Plate |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| PS2-1503 | PS21503 | 5000008802, 5000008803, 5000009120, 5000009121, 5000009186, 5000008801, 5000008804, 5000008805, 5000008806, 5000009122 |
| PS3-1503 | PS31503 | 5000008808, 5000008809, 5000009123, 5000009124, 5000009188, 5000008807, 5000008810, 5000008811, 5000008812, 5000009125 |
| PS2-2203 | PS22203 | 5000008814, 5000008815, 5000009126, 5000009127, 5000009190, 5000008813, 5000008816, 5000008817, 5000008818, 5000009128 |
| PS3-2203 | PS32203 | 5000008820, 5000008821, 5000009129, 5000009130, 5000009192, 5000008819, 5000008822, 5000008823, 5000008824, 5000009131 |
| PS3 2200 | PS32200 | 5000009119 |
| PS3 1500 | PS31500 | 5000009117, 5000009118 |
| 3~Submersible Pumps | PS21503L | 5000620461, 5000620462 |
| PSA2-1503L | PSA21503L | 5000620463 |
| PSA2-2203L | PSA22203L | 5000620466 |
| PSW3 1500 Sub. Pump, 220V/60hz, 2hp, 49' Cord, 13.7A | PSW31500 | 5000620339, 5000620444 |
| PS2-1500 | PS21500 | 5000620458 |
| 3~Submersible Pumps | PS22203L | 5000620464, 5000620465 |
| 3~Submersible Pumps | PSC20753 | 5000620467 |
| 3~Submersible Pumps | PSC31503 | 5000620468 |
| 3~Submersible Pumps | PSC31603EX | 5000620471 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
