The Wacker Neuson Gasket is a genuine OEM replacement designed for the PS2, PS3, PST, PSA, PSW, and PSC series submersible pumps. As a factory-sourced component, part meets the same material and dimensional standards as the original part installed at the time of manufacture. This gasket is confirmed to fit an extensive range of Wacker Neuson submersible pump configurations across multiple voltages and discharge sizes, including PS2-500, PS2-750, PS2-800, PS2-1503, PS3-1503, PS3-2203, PST2-400, PST3-750, PSA2-500, PSA2-800, PSW3-1500, and PSC3-1503 variants, among others.
Key Features
- Genuine OEM Material Integrity — Manufactured to the same compression and sealing tolerances as the original, ensuring a leak-free interface between mating pump surfaces under continuous submersed operation.
- Drop-In Replacement — Designed to seat and seal exactly as the factory-installed gasket, fitting into the same groove or mating surface without rework or trimming.
- Broad Submersible Pump Compatibility — Covers a wide range of Wacker Neuson PS2, PS3, PST, PSA, PSW, and PSC series submersible pumps across 50mm and 75mm discharge configurations and voltages from 110V to 575V.
- Maintains Pump Sealing Performance — A worn or compromised gasket allows water ingress to internal components or permits pumped fluid to bypass the intended flow path, leading to reduced output and potential motor damage.
- Critical Fluid Barrier — In submersible applications, a properly seated gasket is the primary line of defense against water intrusion into sealed motor and electrical chambers — making correct part selection essential to safe, continuous pump operation.
A gasket forms a static seal between two joined surfaces inside the pump assembly, preventing fluid from leaking past the joint under operating pressure. In submersible pumps like the PS and PST series, gaskets are used at critical junctions — such as between the pump housing, volute, and motor casing — where even a minor gap can allow pumped water or debris to reach sealed internal chambers. When a gasket deteriorates, cracks, or is compressed beyond recovery, the seal fails, reducing pump efficiency, causing internal contamination, and risking motor damage that typically cannot be repaired in the field.
Part Details
| Part Number | 5000150676 |
|---|---|
| Old Part Number | 0150676 |
| Brand | Wacker Neuson |
| Part Type | Genuine OEM |
| Description | Gasket |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| PS2-1503 | PS21503 | 5000008802, 5000008803, 5000009120, 5000009121, 5000009186, 5000008801, 5000008804, 5000008805, 5000008806, 5000009122 |
| PS3-1503 | PS31503 | 5000008808, 5000008809, 5000009123, 5000009124, 5000009188, 5000008807, 5000008810, 5000008811, 5000008812, 5000009125 |
| PS2-2203 | PS22203 | 5000008814, 5000008815, 5000009126, 5000009127, 5000009190, 5000008813, 5000008816, 5000008817, 5000008818, 5000009128 |
| PS3-2203 | PS32203 | 5000008820, 5000008821, 5000009129, 5000009130, 5000009192, 5000008819, 5000008822, 5000008823, 5000008824, 5000009131 |
| PST3 750 Sub. Pump, 220V/60hz, 1hp, 33' Cord, 4.7A | PST3750 | 5000620337, 5000620440, 5000620454, 5000620455, 5000620457 |
| PSTF3 750 Sub. Pump, 220V/60hz, 1hp, 33' Cord, 4.7A | PSTF3750 | 5000620338, 5000620441 |
| PS2 800 | PS2800 | 5000620436, 5000620442, 5000620438, 5000620439, 5000620452 |
| PSA2 800 | PSA2800 | 5000620443 |
| PST2-400 | PST2400 | 5000008789, 5000009112, 5000009173, 5000009174, 5000009175 |
| PS3 2200 | PS32200 | 5000009119 |
| PSA2-500 | PSA2500 | 5000008790, 5000009114, 5000009179, 5000009180, 5000009181 |
| PS2-500 | PS2500 | 5000008794, 5000009113, 5000009172, 5000009176, 5000009177, 5000009178 |
| 50mm/2in Submersible Pump 110V /60Hz | PS2750 | 5000009115, 5000009116, 5000009182, 5000009183, 5000009184, 5000008798, 5000008799 |
| PS3 1500 | PS31500 | 5000009117, 5000009118 |
| PSW3 1500 Sub. Pump, 220V/60hz, 2hp, 49' Cord, 13.7A | PSW31500 | 5000620339, 5000620444 |
| PSR1 500 | PSR1500 | 5000620411 |
| PSG2 500 | PSG2500 | 5000620412 |
| PSTF2 400 | PSTF2400 | 5000620435 |
| 3~Submersible Pumps | PSC31503 | 5000620468 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
