Wacker Neuson 5000150708 Dust Seal
Wacker Neuson

Wacker Neuson 5000150708 Dust Seal

$7.05
(No reviews yet) Write a Review
SKU:
5000150708-Wacker Neuson
Adding... The item has been added

The Wacker Neuson Dust Seal is a genuine OEM component designed for the PS2, PSA2, PST2, PST3, PSTF2, PSTF3, PSG2, and PSR1 series submersible pumps. As a direct factory replacement, this seal is manufactured to the same material and dimensional standards as the original, ensuring a correct fit at the shaft entry point where contamination protection matters most. Wacker Neuson genuine OEM parts are sourced directly through authorized channels, so you can be confident in part number matching your machine's original specification. This seal is compatible across a wide range of PS-family submersible pump configurations including 110V, 230V, and 60Hz variants.

Key Features

  • Shaft-Grade Sealing Material — Engineered to the original compound hardness and compression profile, maintaining an effective dust barrier at the rotating shaft interface.
  • Direct OEM Replacement — Installs in the same position as the original seal with no rework to the housing or shaft required, restoring the pump to its factory-sealed condition.
  • Broad PS-Family Compatibility — Fits PS2, PSA2, PST2, PST3, PSTF2, PSTF3, PSG2, and PSR1 series submersible pumps across multiple voltage configurations.
  • Protects Internal Components — A functioning dust seal keeps abrasive particles away from the motor bearings and mechanical seal; a worn or missing seal accelerates bearing wear and risks motor failure.
  • Electrical Safety Compliance — Submersible pump sealing integrity directly affects motor insulation in wet environments; using the correct OEM-spec seal supports safe operation in submerged conditions.

The dust seal on a submersible pump acts as a protective barrier at the point where the motor shaft exits the motor housing, blocking fine particles, grit, and debris from migrating inward toward the bearings and mechanical seal assembly. In pumping applications where the unit is submerged in sediment-laden water or slurry, this barrier is critical — without it, abrasive contamination accelerates bearing wear and can compromise the mechanical seal, leading to water ingress into the motor cavity. Replacing a worn or damaged dust seal at the first sign of deterioration is one of the lowest-cost steps to extending the service life of a submersible pump.

Part Details

Part Number5000150708
Old Part Number0150708
BrandWacker Neuson
Part TypeGenuine OEM
DescriptionDust Seal

Compatibility & Fitment

Name Model Machine Number
PST3 750 Sub. Pump, 220V/60hz, 1hp, 33' Cord, 4.7A PST3750 5000620337, 5000620440, 5000620454, 5000620455, 5000620457
PSTF3 750 Sub. Pump, 220V/60hz, 1hp, 33' Cord, 4.7A PSTF3750 5000620338, 5000620441
PS2 800 PS2800 5000620436, 5000620442, 5000620438, 5000620439, 5000620452, 5000620477
PSA2 800 PSA2800 5000620443, 5000620449, 5000620450
PST2-400 PST2400 5000008789, 5000009112, 5000009173, 5000009174, 5000009175, 5000008785, 5000008786, 5000008788
PSA2-500 PSA2500 5000008790, 5000009114, 5000009179, 5000009180, 5000009181
PS2-500 PS2500 5000008794, 5000009113, 5000009172, 5000009176, 5000009177, 5000009178
PSR1 500 PSR1500 5000620411
PSG2 500 PSG2500 5000620412
PSTF2 400 PSTF2400 5000620435

Verify Before You Order

Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.

Why Buy From DHS Equipment

Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.

Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.