The Wacker Neuson M10 Nut is a genuine OEM fastener designed for the PS2, PS3, and PS4 series submersible pumps. Sourced directly from Wacker Neuson, this part meets the exact material and dimensional specifications used in original assembly, ensuring a correct, secure fit every time. It is compatible across a wide range of PS-series pump configurations, including PS2-3703, PS3-3703, PS4-3703, PS3-5503, PS4-5503, PS4-7503HH, PS4-7503HF, PS4-11003HH, PS4-11003HF, and PS2-750 variants. When fastener integrity matters for submersible pump performance and reliability, using the correct OEM part is the straightforward choice.
Key Features
- OEM-Spec Thread Integrity — Manufactured to the exact M10 thread pitch and tensile grade specified for Wacker Neuson PS-series pump assemblies, ensuring proper clamping load without stripping or galling.
- Drop-In Replacement — Matches the original fastener position and torque spec, so installation requires only standard hand tools with no modification to existing hardware.
- Broad PS-Series Coverage — A single part number that spans the PS2, PS3, and PS4 pump families across 2-inch, 3-inch, and 4-inch discharge configurations in multiple voltage variants.
- Corrosion-Resistant Construction — Built to withstand continuous exposure to the wet, submerged environments that PS-series pumps operate in, maintaining clamp force and thread condition over extended service intervals.
- Genuine Wacker Neuson OEM Part — Supplied as original equipment, part number 5000150747 carries the full backing of Wacker Neuson's parts program with no substitution or variation from the factory-fitted component.
The M10 Nut is a threaded fastener used to secure structural and mechanical connections within the submersible pump assembly. In a pump that operates fully submerged, fastener integrity is critical — a loose or failed nut can allow components to shift under load, disrupting the pump's sealing surfaces or mechanical alignment and leading to performance loss or water ingress into protected areas. Using the correct replacement nut, matched to the original thread specification, restores the assembly to its designed clamping load and keeps the pump operating as intended.
Part Details
| Part Number | 5000150747 |
|---|---|
| Old Part Number | 0150747 |
| Brand | Wacker Neuson |
| Part Type | Genuine OEM |
| Description | M10 Nut |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| PS2-3703 | PS23703 | 5000008826, 5000008827, 5000009132, 5000009133, 5000008825, 5000008828, 5000008829, 5000008830, 5000009134, 5000009194 |
| PS3-3703 | PS33703 | 5000008832, 5000008833, 5000009135, 5000009136, 5000008831, 5000008834, 5000008835, 5000008836, 5000009137, 5000009196 |
| PS4-3703 | PS43703 | 5000008839, 5000008838, 5000009138, 5000009139, 5000008837, 5000008840, 5000008841, 5000008842, 5000009140, 5000009198 |
| PS3-5503 | PS35503 | 5000008844, 5000008845, 5000009141, 5000009142, 5000009200, 5000008843, 5000008846, 5000008847, 5000008848, 5000009143 |
| PS4-5503 | PS45503 | 5000008850, 5000008851, 5000009144, 5000009145, 5000009202, 5000008849, 5000008852, 5000008853, 5000008854, 5000009146 |
| PS4-7503HH | PS47503HH | 5000008856, 5000008857, 5000009147, 5000009148, 5000008855, 5000008858, 5000008859, 5000008860, 5000009149, 5000009204 |
| PS4-7503HF | PS47503HF | 5000008862, 5000008863, 5000008866, 5000009150, 5000009151, 5000009206, 5000008861, 5000008864, 5000008865, 5000009152 |
| PS4-11003HH | PS411003HH | 5000008868, 5000008876, 5000009153, 5000009154, 5000009208, 5000008867, 5000008869, 5000008870, 5000008877, 5000009155 |
| PS4-1003HF | PS411003HF | 5000008872, 5000008878, 5000009156, 5000009157, 5000009210, 5000008871, 5000008873, 5000008874, 5000008879, 5000009158 |
| 50mm/2in Submersible Pump 110V /60Hz | PS2750 | 5000009115, 5000009116, 5000009182, 5000009183, 5000009184, 5000008798, 5000008799 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
