The Wacker Neuson Cheese Head Screw is a genuine OEM fastener used across a wide range of Wacker Neuson equipment, including DPU and DPS reversible vibratory plate compactors, PT2H and PT3H centrifugal trash pumps, HSH350 hydronic surface heaters, DS70 diesel rammers, and E1100 ground heaters. As a factory-original component, this screw is manufactured to the exact material grade, thread specification, and head geometry required for each application it serves. Sourcing the correct OEM fastener is essential when reassembling critical housings, guards, or component mounts — an incorrect substitute can lead to loosening under vibration, stripped threads, or component misalignment. Keep a genuine Cheese Head Screw on hand to ensure your Wacker Neuson equipment goes back together correctly every time.
Key Features
- OEM Thread and Head Geometry: — Manufactured to the exact thread pitch, shank diameter, and cylindrical head profile specified by Wacker Neuson, ensuring full engagement and correct clamping load in every application.
- Vibration-Resistant Fastening: — Built to maintain torque and holding force under the sustained vibration loads generated by plate compactors and rammers, where loosening fasteners can cause component shift or damage.
- Cross-Platform Compatibility: — A single genuine OEM part number covering DPU 2440H through DPU 3760H series compactors, DPS1850H and DPS2050H plates, PT2H and PT3H trash pumps, HSH350 surface heaters, DS70 rammers, and E1100 ground heaters.
- Direct Drop-In Replacement: — Matches the original installation point in head clearance and drive type, so reassembly proceeds without reworking the mounting area or sourcing an adapter.
- Correct Material Grade for the Application: — Produced from the same material specification as the original, resisting corrosion and maintaining structural integrity across outdoor, wet, and high-vibration service environments.
A cheese head screw is a cylindrical-headed machine fastener used to secure panels, guards, housings, and sub-assemblies in place. The flat-topped, straight-sided head profile provides a larger bearing surface than a pan head and a lower profile than a hex cap screw, making it well suited for recessed or space-constrained mounting points. In high-vibration equipment like vibratory plate compactors and rammers, fasteners are under constant cyclic stress; using a screw of the wrong grade, thread pitch, or head size can result in progressive loosening, stripped threads, or component play that accelerates wear on surrounding parts. Replacing a worn or damaged fastener with the correct genuine OEM part restores the proper clamping force and keeps the assembly secure through normal service intervals.
Part Details
| Part Number | 5000151375 |
|---|---|
| Old Part Number | 0151375 |
| Brand | Wacker Neuson |
| Part Type | Genuine OEM |
| Description | Cheese Head Screw |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| Hydronic Surface Heater | HSH350 | 5000620254, 5200001677 |
| PT3H Pump | PT3H | 5000009100, 5000009103, 5000009242, 5100014963, 5100014964 |
| PT2H Pump | PT2H | 5000009094, 5000009097, 5000009239 |
| E1100 GROUND HEATER | E1100 | 5000620172, 5200001676 |
| DPU2540H | DPU 2540H | 5000610035, 5000008755 |
| DPU 2550H | DPU 2550H | 5000610036, 5000008756 |
| DPU 2560H | DPU 2560H | 5000610037, 5000008757 |
| DPU 2560H-TS | DPU 2560H-TS | 5000610038, 5000610005 |
| DPU 3050H | DPU 3050H | 5000610039, 5000008759 |
| DPU 3060H | DPU 3060H | 5000610040, 5000008760 |
| DPU 3070H | DPU 3070H | 5000610041, 5000008908 |
| DPU 3060H-TS | DPU 3060H-TS | 5000610042, 5000610006 |
| DPU 3050HE | DPU 3050HE | 5000610298 |
| DPU 3060HE-TS | DPU 3060HE-TS | 5000610302 |
| DS70H Vibratory Rammer, 13" Plastic Shoe EPA | DS70 | 5200010976 |
| DPS1850H Asphalt | DPS1850H Asphalt | 5000610033, 5000008925 |
| DPS1850H Basic | DPS1850H Basic | 5000610032, 5000008924 |
| DPS1850H Vario | DPS1850H Vario | 5000610034, 5000008926 |
| DPU 3050H US | DPU 3050H US | 5100000310 |
| DPU 3750Hts | DPU 3750Hts | 5000610321 |
| DPU 3750Hets | DPU 3750Hets | 5000610322 |
| DPU 3760Hts | DPU 3760Hts | 5000610358 |
| DPU 3760Hets | DPU 3760Hets | 5000610359 |
| DPU 3750Hts US | DPU 3750Hts US | 5100000311 |
| Reversible Vibratory Plate, 24 kN, 40cm/16in | DPU 2440H | 5000007870 |
| Single Direction Vibratory Pla te, 18kN, 50cm/20in | DPS 1850H | 5000008397, 5000008750 |
| Vibration plate DPU 2450H | DPU 2450H | 5000008746 |
| Vibration Plate | DPU 3050Hw US Army | 5100009915 |
| DPS2050H | DPS2050H | 5100061223 |
| DPS2050Hw | DPS2050Hw | 5100061224 |
| DPS3060Hv | DPS3060Hv | 5100016643 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
